Victron Energy SmartSolar MPPT Solar Charge Controller (Bluetooth) - Charge Controllers for Solar Panels - 100V, 50 amp, 12/24-Volt

This controller is a game changer. It works flawlessly and is loaded with custom features as well as a large array of default battery options. I also bought the victron battery temp and voltage sensor since my batteries are on the ground subject to different temperatures than my controller mounted inside my rv. The Bluetooth works excellent and you can see real time operation as well as historical info.

If you're serious about solar power—whether for your off-grid cabin, RV, boat, or home backup system—the Victron SmartSolar MPPT 100V 50A Charge Controller is one of the smartest investments you can make. Known for precision engineering, exceptional performance, and rock-solid reliability, Victron delivers exactly what pros and enthusiasts demand in solar charge controllers. ⚙️ Smart MPPT Technology for Maximum Power At the heart of this controller is Victron’s ultra-fast Maximum Power Point Tracking (MPPT), which can increase energy harvest by up to 30% compared to PWM or slower MPPT models. It constantly monitors the voltage and current output of your solar panels to extract the maximum available power — even in partial shade or cloudy conditions. 📱 Built-In Bluetooth for Easy Monitoring One of the standout features is built-in Bluetooth. With the VictronConnect app, you can: View real-time charge status and history Monitor solar input, battery voltage, and amperage Adjust settings on the fly Perform firmware updates wirelessly No need for external displays or extra dongles — just your phone or tablet. It’s plug-and-play simplicity with professional-grade control. 🔋 Supports 12V & 24V Systems Automatically The Victron SmartSolar 100/50 auto-detects whether you’re running a 12V or 24V battery system, and charges accordingly. It’s ideal for: RVs and campers Boats and marine systems Off-grid solar cabins Tiny homes Solar-powered backup systems 💪 Build Quality & Reliability You Can Trust Victron is famous for industrial-grade quality. The SmartSolar 100/50 is: Fully electronic with no relays = silent operation Built to handle tough outdoor environments Compatible with lithium, AGM, GEL, and flooded lead-acid batteries Designed for long-term, low-maintenance use It even includes electronic protection against short circuits, overvoltage, overheating, and reverse polarity. In other words, it’s almost impossible to kill this thing. 🧠 Advanced Features for the Tech-Savvy BatteryLife algorithm extends battery lifespan by preventing undercharging Programmable charging profiles for custom setups VE.Direct port for advanced data logging or connection to a GX device or Cerbo system Optional external battery voltage and temperature sensors for extreme accuracy ✅ Pros Industry-leading MPPT efficiency Built-in Bluetooth + mobile app Silent, compact, and rugged design Auto-selects 12V or 24V systems Compatible with all major battery types Trusted Victron Energy brand ❌ Cons Slightly more expensive than no-name brands Does not support 48V systems (for that, you'll need the 150/60 or 250/60 model) ⭐ Final Verdict: 5/5 — The Best Mid-Sized MPPT You Can Buy The Victron SmartSolar MPPT 100/50 is hands-down the gold standard in mid-range solar charge controllers. If you want maximum solar performance, long-term battery protection, and complete wireless monitoring, there’s no better option. It’s ideal for both professionals and DIYers who want a reliable, smart, and scalable solar setup.

Great charge controller!! Love the bluetooth/app feature!!! Works much better then the older charge controllers I had!

This is just to provide some comparison between these MPPTs when i am in search of one that suit my needs. The test being done in various conditions, multiple PV configuration and repeated at least 3 times to eliminate some 'quick and easy' judgements. Honest observation during test found that each MPPT here has their own 'strength' and 'weakness', but all seems are good quality one. None of these result determine anything about 'reliability' and 'longevity' of the MPPTs and no intention to favor one from the others as they are different from their price point and strength/weakness as mentioned above. And by no means this was the 'absolute' result since product batch, setup/configuration and environment condition may differ from time, application and place perspective. Component of tests: - 4 x 300W Monocrystalline Solar PV - 280Ah LiFePo4 Batt 12V - 150A Smart BMS - AMPINVT MPPT 150/40 - EPEVER MPPT 150/40 - VICTRON SmartSolar 100/50 (*) Victron is the only MPPT has higher specs of amp (50A) while the other 2 are 40A, but AMPINVT and EPEVER has higher volt (150V) compare to Victron (100V) Key Performance Indicator: - Tracking time and amount of current (amp) generated in various conditions a) Series/Parallel, and combination of Series and Parallel of PV b) Combine multiple MPPTs (parallel) in same system c) Cloudy/Shading and Full Sun radiation performance Test Method: - To measure the current generated by each MPPT, i use the battery BMS across all the MPPTs so this will eliminate AMPINVT/EPEVER/VICTRON specific calculation and calibration on each of their device. - Using 'external' amperemeter (BMS) will make the judgement square and fair between the 3 MPPTs and objective(not subjective as per vendor specific) Build wise 1) AMPINVT - If i could choose, i would like all the MPPT being build like AMPINVT. - It is very nice solid metal all-round, 2nd most heaviest and the connector style for batt and PV are full clamp type which is good one. - The only complain on this 150/40A series is the connector very small for 4AWG cable size (batt), it is impossible to fit in 4AWG cable in the batt connector. 2) EPEVER - The heaviest and biggest among the 3 MPPTs and the shape a bit awkward for me - Solid build and provide more heat-sink surface to dissipate heat - Among the 3, the connector type on EPEVER is the worst in my opinion, it was 'pinch' style with screw so it doesn't have good amount of contact and holding power, however the connector size is HUGE!, 4AWG size is not a problem at all. 3) VICTRON - Being the smallest (less than half-size of EPEVER!) and the lightest of all - All metal case with heat-sink on the bottom - Connector style similar to AMPINVT and the size is also small, impossible to fit 4AWG cable size! Tracking Time - No doubt AMPINVT is the clear winner here for tracking time, it is very fast compare to VICTRON and EPEVER, VICTRON took almost double the time to reach maximum power point while EPEVER being the slowest of all. - However, this is very important and i almost didn't notice it first till i repeated the test , albeit AMPINVT tracking time is the fastest, the amp generated is not steady, it is fluctuate between 2A(min) - 6A(max) from the max current generated, it seems AMPINVT was 'very active' re-scanning the maximum power point in looping mode and sweeping through the current between 4-7 seconds. - Due to unsteady current generated by AMPINVT, this may reduce the total amp-hour produced even though the tracking time is the fastest (quick/shortest). Cloudy Day - In 2S PV setup, all 3 produced very similar amperage. - In 2S2P PV setup, VICTRON has perform slightly better on cloudy day (by 0.3A - 0.6A) after multiple test reading, while AMPINVT being the last one. Shading Problem - In 2S PV setup, VICTRON and EPEVER produced slightly more amperage compare to AMPINVT. - In 2S2P PV setup, 2 out of 5 test reading shows EPEVER generated slightly more amperage compare to VICTRON (by 0.4A - 0.8A) Full Sun radiation - In 2S and 2S2P PV setup, i can't really tell since the max amperage for AMPINVT and EPEVER already reached (40A), while VICTRON has 50A max, thus VICTRON constantly produce more amperage by 6A-8A higher than the others. Conclusion - AMPINVT has very attractive price point, pretty compact but loud (fan noise) and the really downside is 'unsteady' amp generated, however if system small enough (less than 600W) with 2S PV config only and very limited budget, i think AMPINVT is quite difficult to resist here, since the remaining 2 options is twice or thrice the price. - VICTRON is long known name in MPPT worlds, no doubt it could be the best and the test result telling not far from the tale, however this is the most expensive one in the 'similar' class, if budget is not an issue and you want to build very compact (small) system then it is no brain to not pick up this one. - EPEVER, this MPPT perform similar as VICTRON in many ways and perhaps slightly better in shading scenario, can do over paneling up to 3x the power specs (3x520W=1560W) is huge advantage but due to size you need bigger space, but i guess the the best bang for the buck on this class.

I recently installed this on my travel trailer to replace the factory-installed Furrion solar charge controller. This Victron solar charge controller is superior in every way and is working great for my 400w solar system. I find the app very easy to navigate and its information very useful in monitoring my system.

This charge controller is a powerhouse. Charges my Lifepo4 battery in 2 hours in the morning in good sun and that’s with the charge rate reduced to 40 amps wow. Love the Bluetooth interface and the wiring of the unit was easy. Victron quality shines through great product.

Super happy overall. Purchased this to pair with the cheap controller I originally started my solar setup with. Currently have 6 100 watt panels running to it, performs a lot better than the other controller does- keeping that one setup as a secondary for portable panels that can be laid outside as needed

Returned. The existing 100/30 will continue to meet my needs. Victron is still great quality. If you want economy, you'll have to pay for it. Victron devices just plain work all the time.

Ich habe mir eine kleine Solaranlage aufgebaut und mich für den Victron SmartSolar MPPT 100/50 entschieden. Mein Ziel war es, ein hochwertiges Gerät zu haben, das die Batterie ordentlich lädt und so ihre Lebensdauer verlängert. Freunde von mir nutzen diese günstigen chinesischen PWM-Regler – der Unterschied zu meinem Victron ist einfach gewaltig und gar nicht zu vergleichen. Das Gerät ist massiv, schwer und man merkt schon an der Verarbeitung, dass das kein Spielzeug ist. Was mich am meisten begeistert hat, ist das integrierte Bluetooth. Über die VictronConnect App sehe ich in Echtzeit alles: den aktuellen Ertrag, die Batteriespannung und die Historie der letzten 30 Tage. Die Koppelung über Bluetooth hat völlig problemlos funktioniert. Man braucht nur den PIN für die Verbindung, der beim Gerät dabei war. Es wurden zwei Aufkleber mit dem PIN mitgeliefert – einen habe ich direkt auf das Gerät geklebt und den anderen für meine Unterlagen mit nach Hause genommen. Auch die Installation der Kabel war super: Ein 16 mm² Kabel passt problemlos unter die Anschlussschrauben und man kann alles richtig fest anziehen. Die MPPT-Technologie ist erstklassig. Ich habe gemerkt, dass er selbst bei bewölktem Himmel oder tiefstehender Sonne noch Strom rausholt. Ich nutze ihn in einem 12V-System und er wird absolut nicht heiß. Das Gehäuse aus hochwertigem Kunststoff und Aluminium leitet die Wärme top ab. Außerdem kann er tiefentladene Batterien wieder "aufwecken", was die meisten anderen Regler nicht schaffen. Fazit: Ich bin sehr zufrieden. Wer ein kleines Solarsystem aufbaut und seine Ruhe haben will, sollte zu Victron greifen. Er ist teurer, aber wegen der Sicherheit und der Bluetooth-Funktionen lohnt sich die Investition definitiv. Bewertung: 5/5

Very good quality

These a a great bit of kit, I've got 2 solar strings into two of these chargers connected to 2x 24volt battery banks in parallel. They network together via Bluetooth and act as one charger 100amp charger... You can bring up the charging data along with the past data via the Bluetooth on your phone to check how they're performing... So glad I bought these, they are quality.

Même si c’est peut être du neuf, au vue de l’état du produit à la réception, ça ne donne même pas envie de le garder. Cellophane percer et vieux, carton déchiré et écrasé, papier poubelle à l’intérieur. L’article à forcément été maltraité!

fonctionne parfaitement