Mould Stain Remover Gel Cleaner - ACTIVE Heavy Duty Stain Cleaner for Front Loader Washing Machine Seal, Rubber Gasket, Bathroom Grout, Shower, Caulk - Front Load Washer Cleaning Solution - 7 Fl Oz

Exellent mould remover. Does what it says. Shake the bottle before use. Thick gel looks like clear jelly doesn't drip stays in groves of washing machine seal. You must wait at least 4 hrs before removing it. I waited 5hrs. Wipes away easily seal appears like new. Smells a bit bleachy but not overpowering. Ran the machine after at 90⁰C with the used cloths in the drum and a washing pod. Cloths clean and no residue in the machine. Did a dark wash thereafter no evidence of bleach ever having been in machine clothes all fine. Recommend

Worked better than expected! This is what it looked like when we moved into our rented home. We've tried so many different sprays and nothing would budge it and we didn't want to go to the hassle of re grouting. It's easy to apply but it's also very easy to put too much. It does leave a residue so I highly recommend gloves as it says on the box. Scent is okay, not too overpowering but noticeable. We left it on for the maximum time. It's not completely gone as I think some of the mold is behind the grouting but it's definitely value for money.

I purchased this to clean the door seal of a washing machine we inherited with a house purchase. The door seal had seen better days and was quite discoloured. I was hoping this would kill the visible mould lining the seal and return it to its intended grey colour. Applying the gel was straight forward - though it’s worth noting you do need a Stanley knife (or similar) to cut the nozzle of the bottle. There was no overpowering smell and It was incredibly thick which was great for ensuring it stuck to the surface I was applying it to, but it did mean I ended up using more than I probably needed to had it spread a little more. That said, there’s plenty for two applications in one bottle since it’s a good size. I left the gel to work for three hours. It worked well, removing the black mould and only leaving a slight discolouration in its place. I imagine it would be completely cleared after a second application (or perhaps if I’d allowed it to work a little longer). Clean up was relatively straight forward, but you will need plenty of damp and cloths to get it removed fully. Overall, I’d say it’s good value for money.

That is one fantastic product. Removed all the mould I had on the bathroom and kitchen caulk. Appearance is clear and leaves no residue. Does not carry a scent but acta very quickly on the mould and stains. True value for money.

I honestly had very low expectations before buying this. There are so many mould removal products out there that promise amazing results and then barely make any difference. I almost didn’t bother ordering this because I’ve been disappointed so many times before. But this product genuinely gave me the “wow” factor. I used it on heavily blackened silicone seals around my kitchen sink that I thought were permanently stained and would probably need replacing. I left the gel on for several hours and the difference was unbelievable. The black mould staining lifted dramatically and the silicone came back looking clean again. What impressed me most was that it actually worked without endless scrubbing. The gel stays in place and keeps working instead of just running off like thinner sprays. I’d also seen some reviews mentioning a lingering chemical or bleach smell afterwards, but honestly we didn’t experience that at all. As long as the area is ventilated and wiped down properly afterwards, the smell wasn’t an issue for us. I almost never leave reviews unless a product genuinely impresses me, but this absolutely deserved one. Yes, it costs a bit more than some alternatives, but in my opinion it’s worth paying extra for something that actually delivers results. Easily one of the best cleaning products I’ve bought in a long time

This is easy to apply but I was disappointed that it didn't clean off all the black mould in one go.

This stuff works, got large black mould spots off my washing machine rubber seal. I used a very thick layer of gel and left it for about 10 hours (mostly because I forgot about it!) but when I came back to look at it I could see the spots were gone even before I wiped it. Really pleased.

Initially doubted the effectiveness of this product and I’m not good in writing reviews.. I ordered this and gave it a trial (instructions on the pack).. it actually did the magic. I want to assume the moulds don’t come back in any short period. I honestly will recommend the product to anyone who’s struggling with moulds. I’ve attached 2 photos (before and after)

Oh this is amazing. I bought this as my last hope to remove molds underneath my shower's clear silicone sealant. I tried everything and because it is inside the sealant, nothing actually worked. I put this gel on and have to wait for 10-12 hours. I checked on the 4th hour and it doesn't work any magic yet. But I woke up in the morning and check again, it looks like the molds are gone. Then I have to use water to remove the gel and wow, 98% gone. So now if you don't look into it to find trouble, they are not even there at all.

Our shower is large annd deep and mold grows on the left corners where the shower head is because air circulation is bad. We have had a mold problem for years due to several showers being taken in there every day, the mold could never dry out. I tried bleach, hydrogen peroxide, every type of toxic mold cleaner and it never went away. But it was nasty! So I tried this stuff. First of all, I followed directions to a t! I placed a fan in my shower to really really dry it out. I took the shower brush and scrubbed the dry mold. Then I cleaned it. I dried the whole shower with a towel and let the fan dry it out fully. Then I put on gloves, a mask (you’ll need it- it smells like chlorine!) and eye protectant (just in case, the gel doesn’t splash but there were times when I was squeezing out the bottle that it “farted” and I was glad I was wearing eye gear). The bottle comes with a nozzle that allows you to target specific areas. There is a cap on the nozzle you have to take off. You also have to open the bottle- it’s a foil cover you peel back. Then you point the nozzle at the mold and gently squeeze for the gel to come out. The only trick is not to “scrape” the gel with the tip while squeezing it out- otherwise it moves to the side of the grout and hollows out where you actually want it to go. It took some trial and error to master just having the tip hover above the grout line and not actually touch it, but when I got it, it was pretty easy!!! Then I went to town following all the horrid grout lines. And there were a lot. I’m talking subway tile. I did not have enough of the gel to do the whole thing, but holy cow! You can see where I didn’t put it!!!! I would tap the bottle upside down to make the gel move to the nozzle to make squeezing easier. I used the entire bottle. After I put the gel on, I let it sit for almost 5 hours. It was amazing. The mold was gone underneath the gel. I took a damp cloth and wiped it and the gel had the consistency of dried candle wax and just fell to the floor. I gathered it up and put it in a trash bag. Then I cleaned my shower and let it dry fully overnight. After the gel dries it still smells like chlorine, but after throwing it away there was no remaining smell. I am impressed!!! You can see the areas that I put the gel so clearly, it looks like new tile. Some tips: 1. dry the shower fully!!!!! If the mold is wet, it won’t work. 2. Don’t let it come in contact with clothes! I had a blob fall on my sweats and I rinsed it with water but it left a little bleached spot. 3. Wear eye gear and disposable gloves. The bottle will fart. 4. When I picked up the dried gel, I just held it in my hand and slipped off my glove inside out, trapping it in my glove and creating a little pocket for it to be easily put in a trash bag. 5. Even the gel can stain! I dropped a dried gel in my rug and it left a tiny bleach mark. 6. Be generous with the gel. The areas I didn’t put a lot or did thin lines had some mold spots that did not fully erase. 7. Let the gel sit for longer than you think. I had black slimy mold and I left it there for almost 5 hours. It’s gone!!!! 8. Trust me. Buy at least 2 bottles. You wont regret it. All in all I am so happy to find this product and am already buying more to finish the grout lines. 100% effective.

This mold stain remover is like magic. I had stubborn mold stains that I thought would never come off, but they disappeared with very little effort after using this product. It offers great value for money because a small amount goes a long way, making it well worth the price. The squeeze bottle makes application easy and lets you apply the product exactly where it's needed without making a mess. It didn't leave behind any residue just a clean, fresh-looking surface. I also liked that it was gentle on the surface and didn't cause any damage or discoloration. The scent was mild and not overpowering, especially compared to other mold removers I've tried. I would definitely purchase it again and highly recommend it for tackling stubborn mold stains.

If I could give this product more than five stars, I absolutely would! I was skeptical at first, but it completely exceeded my expectations. My bathroom shower tiles had so much mold that I had almost given up. I had already tried every cleaning product I could think of, and nothing seemed to work. Then I gave this product a try, and I was honestly amazed by the results. It’s incredibly effective, easy to use, and does exactly what it claims. My shower tiles look so much cleaner, and the mold came off with far less effort than I expected. I’m extremely satisfied with this purchase and would highly recommend it to anyone dealing with stubborn mold.

I should have taken before and after pictures but honestly I didn’t actually believe it would work. After trying several different products that claim to get rid of the mold on the caulking in my shower it had low expectations of this. But, the reviews were overwhelming so I took a chance. I followed the directions exactly and it worked AS ADVERTISED. There is no mold on my shower surround caulking where I put the gel. I’m a believer. 100% effective. Easy to apply. No harsh smell. Smells like Clorox. Slight scent dissipates once you use the shower.