ItranMc Car Window Weather Stripping Molding Trim Belt,Compatible with Honda Civic 2016-2021 4-Door Sedan, Replace#72450-TEA-T01 72410-TEA-T01 72950-TEA-T01 72910-TEA-T01

I picked these up for my 2008 Honda Civic. These strips were a perfect aftermarket replacement for my existing ones, which desperately needed to be replaced. They feel high quality and were easy to install. Great price for $33 at time of order. I have no complaints and am happy to recommend them.

Very close to the OEM parts which costs more. Installed with no problem and the fit is perfect. First aftermarket part I have seen for the 2011 Honda Civic that was well-made for a great price.

I’ve owned enough Hondas to know this isn’t a fluke; the factory weather stripping on the Civic seems to age like a banana in July. Give it a few years and it’s cracking, peeling, and quietly inviting rainwater to move into your doors like an uninvited houseguest. The fit was spot-on, like they came straight from the factory on a good day. All four went in within minutes, no wrestling, no colorful language, no “maybe if I force it” moments. Just clean, simple installation. Best of all, the problem is actually solved. No more water sneaking past tired seals. No more opening the door after a storm and wondering if you’ve accidentally started a small aquarium.

Great Product for the Price. Easy to replace, fits just right, looks great, and reduce the amount of outside noise inside the car.

Fit pretty well on my Honda civic 2013 lx. Did cause SOME issues when it came to a perfect fit (and slightly broke my rear door plastic) but still easy enough to fit. Sticks well and has held up for a while now. Does lower noise and keeps wind out. Looks good enough

I was very nervous about purchasing an aftermarket weatherstripping molding for my 2018 Honda Civic. Turns out I did not have anything to be nervous about because they are awesome and easy to install with the right parts. I was going to install them myself, but ended up hiring somebody to put them on my car. The guys commented about how perfect they fit. I would buy these window weatherstripping molding again.

These are great replacements for the cracked and ugly looking weather strips. They fit 2013 4-door civic . When removing the strips from the car, use panel removing tools and a rag to prevent scratches. For the front, I started with the one towards the back on one of them. Front installation, ensure you slide the strips to the little notch on the back end of the door. Then just lightly press down. I used a rubber mallet just lightly tapping. For the back ones, I removed the plastic panel and it was easier to remove the strips from the back end. There is a screw on the back of the door to remove the plastic panel. Remove the screw and gently pry the panel outside from the top area. Let’s see how long these will last, for now it’s worth the purchase.

I watched a YouTube video to learn to remove the old trim and install the new trim. It seemed simple enough, but it was a little more complicated than the instructions in the YouTube video. Looking back, it is harder to remove the old trim than it is to install the new trim. Don't forget to wash your windows and door beneath the old trim before installing the new trim. The trim pieces do not include any instructions for installation. The pieces are individually wrapped and labeled. If you don't have one, you will need to have a plastic pry bar to aid in removal of the old trim. In the video I watched, the installer used a plastic pry bar and a screwdriver to remove old trim and broken clips. I ordered a plastic pry bar kit that included one metal pry tool and I used that along with the plastic pry bar to lift the old trim up and break the first clip. After that you can use your hands to pull the trim the rest of the way off. You will break the old trim clips removing the trim. The old trim is garbage after that. I read reviews prior to ordering and was very hopeful based on positive reviews, but also completely expected the trim to not work on my car. I installed my left rear trim piece first and was sure the one review that mentioned the clips didn't work was going to be my experience because the piece was not clicking anywhere. So after 30 minutes of struggle, I did not think the trim was going to work since the clips did not click into place as instructed in the YouTube video and the trim could be easily lifted back off the door. I asked someone else to take a look and they suggested pushing the center of the clip forward just a bit to give it room to grab under the door. Following that advice, I used a screwdriver to push or bend the center part of the clip forward. This is the part of the clip that will catch under the door frame and keep the trim in place, and after that bend, the trim did click in place and could not be moved. The YouTube also mentions that once it clicks in place it is permanent, so make sure it is aligned correctly before you clip it in place. I clicked my right rear in place about 1/4 inch too far back and it took a lot of pushing, pulling, and shoving and a lot more swear words to finally get it to slide into place and close that gap at the front of the door. Lesson was learned and I made sure to double check the fit before clicking the other pieces in place. If I'd known to bend the center of the clip out to help it catch under the door, removal and installation would have probably taken an hour. I wasted about 30 minutes trying to make the first piece work before I gave up and asked for help and then it took me about an hour to finish up, including time to clean the windows and door beneath the old trim. All of the pieces fit perfectly and they look like factory parts on the car.

The product arrived, and we installed the four rubber mouldings on the windows. Not original Honda window mouldings but the quality is just as good and the price is considerably lower. They were a perfect fit, and we are happy.

Honda 2016 touring fait parfaitement

Live in Australia.These do not fir our 2012 honda crv..waste of money.

Buen producto, cumple con las expectativas

J'ai adoré la belle qualité de ces bandes . Ces bandes sont très facile a installé . Tu lève un coin avec un outil mince de plastique (doit être levé directement vers le haut) . Tu nettoie le rebord avant de mettre les neufs . J'ai un Honda Civic LX 2010 et a place de payé 500$ chez le concessionnaire bien ces bandes de qualité très précise sont identique a celle de compagnie. Je recommende fortement et vous ne serai pas décus .