hygger Aquarium Fish Waste Collector, Aquarium Filter Accessory, External Hanging DIY Aquarium Overflow Pipe Filter with Fish Impurity Separator Collection Box, Fish Tank Siphon Filtration System

For the function of this item as its stated I will absolutely give it what it deserves..., BUT ITS DEFINITELY AN EYESORE. NO MATTER WHAT YOU DO LOOKES LIKE IT DONT BELONG. WITH THAT BEING SAID..., THIS ITEM is not miss leading to a buyer , You just must know what your getting bc it seems like it could be the answer to a lot of aquariumist problems without purchasing more pricy items.. But know the Chucky look.... Remains a Chucky look. So as for the "EASE OF ASSEMBLY, SIZE, FUNCTIONALITY, QUALITY, AND NOISE LEVEL.... IT GETS EVERY STAR.

Horrible. Not only was some parts missing, but it leaked like crazy. And the in take did not work until a worked on forever. When it finally worked, all the pipes came apart, and got water everywhere, and almost stopped a fire. Even after that, I still worked with it, until a saw that more of the pipes were cracked. Completely worthless, just buy a overflow box, and save the headache.

This works really well, no leaks. Not sure what else to say. It was very easy to set up, easy to prime and start, and is really easy to empty the waste collectors and clean the screens. The tube for setting the low point and preventing it from draining your tank works as expected. Great product.

Was waiting on it long time since I saw on youtube channel. Ordered right away at the time they launched. Packaged very well with all you need for your fish tank. Good quality overall unless the cutter is weak. Work perfect with my canister filter too. If you know how to use it you will happy with it.

The product is good and does what it say. But the down side is that mine had more then a few water leaking from multiple area. Seems like some people are having the same issue as me and some don't have that issue. So is all on luck for anymore who's planning to buy. So cross your finger and pray before you buy and Goodluck that you don't get a leaking one. Which tells me they have a quality issue and or a quality check issue. Which mean they most likely don't test these for water leakage before selling. I'm a pretty handy guy so it wasn't an issue for me personally. They also supply me with more then enough extra PCV pipe for me to take it apart and redo nearly every pipe myself putting on extra PCV clue to insure it doesn't leak again. Yes I could of just complain and I could of just demanded for a replacement part, but to me I don't like to stress over stuff. I just find this as a little project I can injoy taking it apart and redoing their leaking fitting work. If you do on planning to do what I did taking it apart to fix the area that's leaking I find that it's best to use a heat source to heat up the parts first it will come apart easier. So all in all beside the poor quality water leaking issue with it. The product works good as it's intended to. So quality just need to be better. And I recommend that they should test for water leakage before selling it. They may say oh but we do do quality check on them and then I'll say to you as a customer of yours. You need to do a quality check on you workers 😉 because their quality checking is not up to quality. 😉 hint hint hire better quality checkers.

This is a nice system but needs tuning to get it to work properly if the power goes out and to restart flow. be sure to tune before leaving so that you dont end up with a flood. I took out screens because were my clean out valves are at it is hard to get to.

I’ve been running this for a few months now I am pretty pleased with the results. I am running it on a 40 gallon aquarium with a 20 gallon sump. I was considering attempting to just build one but I came across this product and have It’s probably the best bang for the buck you’re going to find for this type of overflow system. Yes, you do have to do a bit of customization, but they include everything you need inside the box to do it. I would say worth it just for the fittings alone.

Stay away until they fix the problems I took me week just to get it to stop leaking Teflon tape doesn’t go on non threaded joints duhhhhh every part that connects I had to change out and glued adapters on them so they can be screwed on and off for easy access one of the clear tubes broke on me trying to tighten the bottom part cause it kept leaking then find out they teflon taped those together so took it all back apart again glued those back on then after that it just kinda works the screens don’t really do what they say everything just gets stuck but it kinda does what it says but my sump says different about the same amount in my filter socks which I was really trying and hoping this would slow down from plugging up so fast but after all that I just ended up throwing it away was of time and money everything I have bought from hygger has been good but now I think I am going to start thinking about there stuff before purchasing cause how terrible they executed this great idea man they are in trouble if this is were this company is headed

تم تفكيك