ItranMc Car Window Weather Stripping Molding Trim Belt,Compatible with Honda Civic 2012-2015 4-Door Sedan,Replace#72450-TR0-A01 72410-TR0-A01 72950-TR0-A01 72910-TR0-A01

The OTTANMC window molding trim fits my Honda Accord perfectly and instantly improved the car’s appearance. Installation was simple and quick, but few small flat scredrivers might be needed. The trim feels sturdy and well-made, not cheap or flimsy. It sits flush and secure, even after driving and washing the car. Finally, it’s a high-quality replacement that gives a clean, factory-style finish at a great price.

I’ve owned enough Hondas to know this isn’t a fluke; the factory weather stripping on the Civic seems to age like a banana in July. Give it a few years and it’s cracking, peeling, and quietly inviting rainwater to move into your doors like an uninvited houseguest. The fit was spot-on, like they came straight from the factory on a good day. All four went in within minutes, no wrestling, no colorful language, no “maybe if I force it” moments. Just clean, simple installation. Best of all, the problem is actually solved. No more water sneaking past tired seals. No more opening the door after a storm and wondering if you’ve accidentally started a small aquarium.

I purchased the weather stripping for my 2017 Honda Civic sedan and it fit perfectly. Item appeared identical to the original OEM product that I replaced. Was easy to install using the corner of a flexible plastic Bondo scraper to push in the tabs that secure the stripping to the door panel. For directions, there are a couple of good YouTube videos specifically on replacing the stripping on a 2017 Honda Civic. Watch the videos and it's an easy job. Just take your time and don't hurry.

Installed on 2016 Honda Civic 4-door. Functional fit, great price. Removal of the old molding seems a little daunting, but once you accept that the old plastic tabs will frequently snap off, it goes quickly. I ordered a cheap set of auto trim removal tools and they were very helpful. I recommend that you watch several YouTubes before you start... none of the videos were fully helpful, but as a group they were enough to go ahead with some confidence. The tabs line up perfectly with the car door panel with a minimum of work. The alignment of the front and back molding and the rest of the trim is a little off but overall, the trim looks good and functions well. I don't know if OEM parts would align better, but these are certainly great for the money.

These are great replacements for the cracked and ugly looking weather strips. They fit 2013 4-door civic . When removing the strips from the car, use panel removing tools and a rag to prevent scratches. For the front, I started with the one towards the back on one of them. Front installation, ensure you slide the strips to the little notch on the back end of the door. Then just lightly press down. I used a rubber mallet just lightly tapping. For the back ones, I removed the plastic panel and it was easier to remove the strips from the back end. There is a screw on the back of the door to remove the plastic panel. Remove the screw and gently pry the panel outside from the top area. Let’s see how long these will last, for now it’s worth the purchase.

I watched a YouTube video to learn to remove the old trim and install the new trim. It seemed simple enough, but it was a little more complicated than the instructions in the YouTube video. Looking back, it is harder to remove the old trim than it is to install the new trim. Don't forget to wash your windows and door beneath the old trim before installing the new trim. The trim pieces do not include any instructions for installation. The pieces are individually wrapped and labeled. If you don't have one, you will need to have a plastic pry bar to aid in removal of the old trim. In the video I watched, the installer used a plastic pry bar and a screwdriver to remove old trim and broken clips. I ordered a plastic pry bar kit that included one metal pry tool and I used that along with the plastic pry bar to lift the old trim up and break the first clip. After that you can use your hands to pull the trim the rest of the way off. You will break the old trim clips removing the trim. The old trim is garbage after that. I read reviews prior to ordering and was very hopeful based on positive reviews, but also completely expected the trim to not work on my car. I installed my left rear trim piece first and was sure the one review that mentioned the clips didn't work was going to be my experience because the piece was not clicking anywhere. So after 30 minutes of struggle, I did not think the trim was going to work since the clips did not click into place as instructed in the YouTube video and the trim could be easily lifted back off the door. I asked someone else to take a look and they suggested pushing the center of the clip forward just a bit to give it room to grab under the door. Following that advice, I used a screwdriver to push or bend the center part of the clip forward. This is the part of the clip that will catch under the door frame and keep the trim in place, and after that bend, the trim did click in place and could not be moved. The YouTube also mentions that once it clicks in place it is permanent, so make sure it is aligned correctly before you clip it in place. I clicked my right rear in place about 1/4 inch too far back and it took a lot of pushing, pulling, and shoving and a lot more swear words to finally get it to slide into place and close that gap at the front of the door. Lesson was learned and I made sure to double check the fit before clicking the other pieces in place. If I'd known to bend the center of the clip out to help it catch under the door, removal and installation would have probably taken an hour. I wasted about 30 minutes trying to make the first piece work before I gave up and asked for help and then it took me about an hour to finish up, including time to clean the windows and door beneath the old trim. All of the pieces fit perfectly and they look like factory parts on the car.

Absolutely amazing. I am new to “do it yourself” car things so I was hoping this would be something I can do at home. AND LEMME TELL YOU this product is amazing!! Super easy install and after a couple YouTube vids to remove the old ones, these were no problem! For reference I have a 2017 Honda Civic EX sedan. It took me maybe 10-20 ish minutes to figure out what goes where, but I think that’s just a me thing. It’s super easy and super affordable. Transformed the look of my car. Buy it! I included my before and after pics!

The weather stripping fits my 2017 Civic Ex well and it was easy to install. I hope it will hold up for years like the original.

The product arrived, and we installed the four rubber mouldings on the windows. Not original Honda window mouldings but the quality is just as good and the price is considerably lower. They were a perfect fit, and we are happy.

Honda 2016 touring fait parfaitement

Live in Australia.These do not fir our 2012 honda crv..waste of money.

Buen producto, cumple con las expectativas

J'ai adoré la belle qualité de ces bandes . Ces bandes sont très facile a installé . Tu lève un coin avec un outil mince de plastique (doit être levé directement vers le haut) . Tu nettoie le rebord avant de mettre les neufs . J'ai un Honda Civic LX 2010 et a place de payé 500$ chez le concessionnaire bien ces bandes de qualité très précise sont identique a celle de compagnie. Je recommende fortement et vous ne serai pas décus .