Car Window Weather Stripping Molding Trim Belt,Compatible with Honda Civic 2012-2015 4-Door Sedan,Replace#72450-TR0-A01 72410-TR0-A01 72950-TR0-A01 72910-TR0-A01

Pleased with product. Good price especially when compared to Honda OEM replacement parts. Fit is very good, close to original, though Honda parts might have a _slightly_better fit. Well packaged and relatively easy to install. Rear window molding take a bit more time to get right. Take your time. Recommend you review various YouTube videos. Also, be sure to have or purchase some cheap plastic pry tools. Overall, pleased with results. Would purchase again.

Perfect fit for my 2018 Honda Civic EX Sedan and super easy to install

I watched a YouTube video to learn to remove the old trim and install the new trim. It seemed simple enough, but it was a little more complicated than the instructions in the YouTube video. Looking back, it is harder to remove the old trim than it is to install the new trim. Don't forget to wash your windows and door beneath the old trim before installing the new trim. The trim pieces do not include any instructions for installation. The pieces are individually wrapped and labeled. If you don't have one, you will need to have a plastic pry bar to aid in removal of the old trim. In the video I watched, the installer used a plastic pry bar and a screwdriver to remove old trim and broken clips. I ordered a plastic pry bar kit that included one metal pry tool and I used that along with the plastic pry bar to lift the old trim up and break the first clip. After that you can use your hands to pull the trim the rest of the way off. You will break the old trim clips removing the trim. The old trim is garbage after that. I read reviews prior to ordering and was very hopeful based on positive reviews, but also completely expected the trim to not work on my car. I installed my left rear trim piece first and was sure the one review that mentioned the clips didn't work was going to be my experience because the piece was not clicking anywhere. So after 30 minutes of struggle, I did not think the trim was going to work since the clips did not click into place as instructed in the YouTube video and the trim could be easily lifted back off the door. I asked someone else to take a look and they suggested pushing the center of the clip forward just a bit to give it room to grab under the door. Following that advice, I used a screwdriver to push or bend the center part of the clip forward. This is the part of the clip that will catch under the door frame and keep the trim in place, and after that bend, the trim did click in place and could not be moved. The YouTube also mentions that once it clicks in place it is permanent, so make sure it is aligned correctly before you clip it in place. I clicked my right rear in place about 1/4 inch too far back and it took a lot of pushing, pulling, and shoving and a lot more swear words to finally get it to slide into place and close that gap at the front of the door. Lesson was learned and I made sure to double check the fit before clicking the other pieces in place. If I'd known to bend the center of the clip out to help it catch under the door, removal and installation would have probably taken an hour. I wasted about 30 minutes trying to make the first piece work before I gave up and asked for help and then it took me about an hour to finish up, including time to clean the windows and door beneath the old trim. All of the pieces fit perfectly and they look like factory parts on the car.

Great fit for my Honda Civic. Saved a lot of money. Was easy to install.

Fit pretty well on my Honda civic 2013 lx. Did cause SOME issues when it came to a perfect fit (and slightly broke my rear door plastic) but still easy enough to fit. Sticks well and has held up for a while now. Does lower noise and keeps wind out. Looks good enough

Easy installation for my 2015 Honda Civic EX. I started in the rear. Take off the little plastic rear window panels for easier installation you only need a Phillips screwdriver. You don’t need to take off the front one since it’s not hindering to put this on but if you want to its also one Phillips screw to take off. If you do decide to take off the front panel make sure u slide it up so u don’t break the clips. When u slide the westher strip make sure u angle it so the Blue clips will latch on. You would know once u put it on and if u try to pull it up it will be hard meaning u latch it on right.

Fits perfect!

Pain to remove, easy to install. They lift straight up. You need an 8mm socket to remove the front mirrors on 2007 crv. All four were labeled front/rear left/right. Easy day and they look great.

The product arrived, and we installed the four rubber mouldings on the windows. Not original Honda window mouldings but the quality is just as good and the price is considerably lower. They were a perfect fit, and we are happy.

Honda 2016 touring fait parfaitement

Buen producto, cumple con las expectativas

Excellent fit.

Oui c'est utile