Privacy Film Heat Blocker Window Tint - Black Out Blinds No Adhesive Glass Film Static Cling Insulation Sticker Reflective Cling (118.1 x 23.6 Inch)

Right off the bat you might think they sent you the wrong color when you get it, but trust me it’s not. We ordered the one that looks clear and has prismatic colored effects in it. When it arrived it looked smoked on the roll, like tint for car windows. We decided to install it anyway, thinking it’s just for a bathroom so it doesn’t matter all that much. Turns out once it is unrolled and installed it is the right color. It’s not tinted at all, is very clear and translucent, and has the colored prismatic effects just like we wanted. Installation is pretty easy. The instructions said to clean the window, then spray water on the glass, then peel the backing off of the film and apply it to the glass and use a credit card to smooth out the ripples. Only thing I lacked was a spray bottle so I just used a wet rag to wet the glass and then applied the film. That worked great. For trimming to size I just rolled the film out and cut it to the exact length needed for the window width. I used a metal ruler as a guide and just used a pocket knife along the edge to cut the film. It cuts easily. I figured I’d cut one length exact so I don’t have to trim it two directions once on the window. You have to cut it anyway to remove it from the roll, so just cut it exactly to length. Then I pressed the film onto the glass, and being cut exactly to length it fits side to side just right, and then I had the top edge all the way up, so that means it fit perfectly on three sides. All I had to do was trim the final side. I use the credit card to smooth out the air bubbles and then press the final side tightly against the window frame and use my pocket knife to cut it for a pretty smooth fit. The final result looks amazing.

I love it! Has a slight shimmer, and does not completely block the view (you can still see between the frost lines). Easy to apply.

Very easy to put on the windows. Also various designs. Good for privacy

This Coavas window film looks great and DEFINITELY cuts down the heat from the sun--and holds in the heat when it's cold outside. I love that you still feel you can see some of the outdoors, you get a good amount of light in the room, but you're not living in a fishbowl for the neighbors. I can walk around in my undies and not frighten the neighbors. With window films, thickness or thinness is a big deal. This one hits the sweet spot: It isn't so thin that it keeps folding back on itself and sticking while you're working with it, and it isn't so thick that it looks like plastic junk on your window or smells like toxic vinyl when it heats up in the sun. It also separates more easily from the backing compared to others. I found this Coavas window film super-easy to hang, compared with all the others I've used. MY HANGING METHOD (same as everyone's until step 5): I have those pricey vinyl windows and don't want a razor knife near them for trimming... (1) Squirt water all over the clean window, (2) Place a guesstimated-sized piece of window file against the window, and (3) Smooth out most of the air bubbles with the rubber side of a plastic wallpaper smoother. Then (4) Slide the plastic edge of the smoother along each outside edge of the window at the same time you (5) Slide a ballpoint pen between the edge of the smoother and the edge of the window. You wind up with penlines on all four sides of the glass. They don't quite make it to the corners, because the smoother doesn't quite make it there. Then, (6) Lift each side of the window film away from the glass and cut CAREFULLY along the lines with good scissors (7) Spray more water and reapply the film, and move to the next side. (8) Literally pat yourself on the back to celebrate what a good job you did!

Don't be like me and not read instructions! I thought I had to simply cut to size spray water and put them in place, nope! They fell off, so I watched the very helpful video and realized it had a backing you have to peel off first, duh, that makes so much sense now! Pulled that backing off hung them and they have not come off! It looks really good and blocks light enough without making it dark. It's a little tricky to work with because it's in a roll and not flat, but if I can do it anybody can!

Product was thin and hard to apply. No instructions were included, but there was basic brief printed on the outside of the box. There was no 3D texture to the film itself, which I found odd considering the product description. I considered that maybe I was inept, but after the adhesive started decomposing in my 2 parts distilled to 1 part 70% isopropyl solution during application, I chose to tear it off my window and bin it. Gonna try another listing.

Lightness in weight. Easy to install. Looks great very functional allows. The light to enter into the kids room without the outside being able to look into their. I would definitely say very functional. Adhesive quality very good considering all you have to do is clean your window spray a little mist of water on both the film in the glass and then squeegee the access out. If you’re covering a sliding glass door like I had to I had to get four rolls because the size that I got wasn’t large enough, but still turned out great.

Really easy to apply and looks great! Easy solution to hiding the mess in our cabinet

O efeito é bem realista. Gostei

Use el producto para bloquear una ventanita a la cual le daba el sol directamente por la mañana y era un poco molesto

todo muy bien y buen producto

Thank you, love this product! The film is easy to install and looks fantastic.

ممتاز جدا وسهل التركيب