Dash Camera Hard Wire Kit With Left MicroUSB Direct Hardwire Car Charger Cable Kit For HD PRO & Micro USB Dashboard Camera Power Supply Car Charger GPS Car DVR Power Box(Left Angle Micro USB Fuse Kit)

Kit works and does what it's supposed to do: power my dash cam. As others have noted, there are no directions of any kind. OK. If you're only using one fuse, you'll need a multi-tester to figure out which slot to put the fuse in because...no instructions. Also, the picture clearly shows the fuse box end of the kit has a bullet connector on the end of the wire, but the usb end is not terminated. Because they didn't include the connector, you'll either need to buy a male connector and crimp it on the end, or replace it completely. I had a bunch of 15-watt Anderson connectors around, so I opted to cut the bullet connector off and replace it. That's not difficult, but it's not plug-and-play; you'll either need additional pieces, or you'll have to modify the kit. So it would be 5 stars because it works fine, but knock 2 stars off because it's a pain-in-the-neck.

I attempted to use this product to support a hard-wire installation of a 70mai Pro dash cam (model: Midrive D01) with the GPS/ADAS module attached. The connector is correct - micro-USB. The "left 90° connector" results in the cable running down relative to the body of the camera. Output voltage is 5 V. That's all fine, but...The output current of the adapter is only 1.5 Amps. Shameful. 2.0 Amps is the bare minimum that should be delivered for modern electronics. And, that 2 A is the what this dash cam needs to run (according to 70mai specifications).The result is that the dash cam will run okay for a while as it drains the battery. Then, it will shut down, start up, run a bit, then repeat the cycle. Forever. Not good. Now, I have to get another unit and redo my wiring work.DON'T BUY THIS PRODUCT.

I used this to replace another much more expensive model that the plug broke on. I was worried about quality with the lower price. Quality of construction does seem to be in line with it's lower price point but it's working fine with no issues for the last month so far. If it fails I will update this review accordingly. The cable length at the video output side is shorter than the other model I was using. The length on the power/ground side cables are much much longer so I had plenty of length in my wrangler to reach to the rear view mirror. Personally I would prefer it the other way with the cable being longer on the video output side of the box portion so the power/ground wires side with the box could be mounted further away you don't want to have to try to hide the box portion of this under molding.

This did not power up my Anker Roav dashcam

Works well for my Cobra dash cam. Wired it so that I always have power on for monitoring using the motion sensors.

Never worked

Did not power on Roav dash cam

Works great. This is the angle I needed to plug into my dash cam and easily hide the wire. The length should be plenty long enough for almost any vehicle and the included fuse and fuse tap is an added bonus.