ACTIVE Mold Stain Remover Gel Cleaner Heavy Duty Stain Cleaner for Front Loader Washing Machine Seal, Bathroom Grout, Shower, Caulk - Front Load Washer Cleaning Solution - 7 Fl Oz

Our shower is large annd deep and mold grows on the left corners where the shower head is because air circulation is bad. We have had a mold problem for years due to several showers being taken in there every day, the mold could never dry out. I tried bleach, hydrogen peroxide, every type of toxic mold cleaner and it never went away. But it was nasty! So I tried this stuff. First of all, I followed directions to a t! I placed a fan in my shower to really really dry it out. I took the shower brush and scrubbed the dry mold. Then I cleaned it. I dried the whole shower with a towel and let the fan dry it out fully. Then I put on gloves, a mask (you’ll need it- it smells like chlorine!) and eye protectant (just in case, the gel doesn’t splash but there were times when I was squeezing out the bottle that it “farted” and I was glad I was wearing eye gear). The bottle comes with a nozzle that allows you to target specific areas. There is a cap on the nozzle you have to take off. You also have to open the bottle- it’s a foil cover you peel back. Then you point the nozzle at the mold and gently squeeze for the gel to come out. The only trick is not to “scrape” the gel with the tip while squeezing it out- otherwise it moves to the side of the grout and hollows out where you actually want it to go. It took some trial and error to master just having the tip hover above the grout line and not actually touch it, but when I got it, it was pretty easy!!! Then I went to town following all the horrid grout lines. And there were a lot. I’m talking subway tile. I did not have enough of the gel to do the whole thing, but holy cow! You can see where I didn’t put it!!!! I would tap the bottle upside down to make the gel move to the nozzle to make squeezing easier. I used the entire bottle. After I put the gel on, I let it sit for almost 5 hours. It was amazing. The mold was gone underneath the gel. I took a damp cloth and wiped it and the gel had the consistency of dried candle wax and just fell to the floor. I gathered it up and put it in a trash bag. Then I cleaned my shower and let it dry fully overnight. After the gel dries it still smells like chlorine, but after throwing it away there was no remaining smell. I am impressed!!! You can see the areas that I put the gel so clearly, it looks like new tile. Some tips: 1. dry the shower fully!!!!! If the mold is wet, it won’t work. 2. Don’t let it come in contact with clothes! I had a blob fall on my sweats and I rinsed it with water but it left a little bleached spot. 3. Wear eye gear and disposable gloves. The bottle will fart. 4. When I picked up the dried gel, I just held it in my hand and slipped off my glove inside out, trapping it in my glove and creating a little pocket for it to be easily put in a trash bag. 5. Even the gel can stain! I dropped a dried gel in my rug and it left a tiny bleach mark. 6. Be generous with the gel. The areas I didn’t put a lot or did thin lines had some mold spots that did not fully erase. 7. Let the gel sit for longer than you think. I had black slimy mold and I left it there for almost 5 hours. It’s gone!!!! 8. Trust me. Buy at least 2 bottles. You wont regret it. All in all I am so happy to find this product and am already buying more to finish the grout lines. 100% effective.

I recently tried the ACTIVE Mold Stain Remover Gel, and I must say, it exceeded my expectations! Here’s a detailed breakdown of my experience: **Effectiveness** From the moment I applied the gel, I noticed how quickly it began to work. It penetrated deep into the mold stains, effectively lifting them from surfaces. I used it on various materials, including tiles and grout, and each application resulted in a noticeable difference. The stubborn black spots that had been there for months disappeared with minimal scrubbing. **Ease of Use** The gel consistency is fantastic. It clings well to vertical surfaces, preventing drips and allowing for precise application. The nozzle design made it easy to target specific areas without wasting product. I appreciated that it didn’t require complicated mixing or preparation—just apply, wait, and rinse. **Safety and Odor** One of my concerns with mold removers is the harsh chemicals often involved. Fortunately, ACTIVE Mold Stain Remover Gel has a relatively mild scent compared to other products I've used, making it much more pleasant to work with. Despite being effective, I felt safe using it indoors. **Value for Money** Given its performance and effectiveness, I found the price to be quite reasonable. A little goes a long way, and considering the time and effort it saved me in cleaning, it’s worth every penny. **Overall Impression** I highly recommend ACTIVE Mold Stain Remover Gel to anyone dealing with mold issues, whether in bathrooms, kitchens, or outdoor spaces. It’s a reliable solution that delivers results without the hassle of strong odors or complicated application processes. I will definitely keep this product in my cleaning arsenal moving forward!

This stuff worked quite well. We had some nasty looking mold going on in tub and I put this on it and it has taken care of 95% of the mold. I am going to do 1 more treatment and that should take care of it. I noticed that if you just leave it on there for a couple days makes it work better and its easier to come off. The application was easy (give it a good shake first). Wiped up pretty clean, no residue. Its a bit strong on the chlorine smell but that's to be expected. Definitely worth the price

Pro: The mold remover itself does a solid job at removing tough mold. I had mold stuck in tub grout that I couldn't remove with other scrubbing and cleaning products. I've tried everything from scrubs, baking soda soaks, bleach, etc. and although all of those helped remove some mold deep in the grout, it was never enough. I read a lot of reviews on this product before purchasing and I will say it definitely does a really good job. It works much better than a spray or scrub as the gel has time to sit and penetrate. I left the gel on longer than recommended as other reviews made a recommendation to leave it on for longer. I left it on for 6.5 hours. The smell is stronger, like a chlorinated hotel pool (which didn't personally bother me) but I'm noting it for those who are sensitive to such smells. Also if you have littles, make sure they get a bath or shower first before using this product. I wiped down very thoroughly, opened a window to air out and sprayed down the shower with our adjustable shower head and waited overnight before using. You really want to make sure the chemical is completely cleared out. As some other viewers commented, it is intense and does leave bleach stain. I hadn't noticed but I had gotten a very minor bleach stain on an old pj top I was wearing while using this product. My main con: the bottle itself is a pain to use and for me to do all of the grout lines of my tub, it took 2.5 bottles which certainly added up. I'm very happy it worked as I was desperate to find something that could really do the job but I had to purchase 3 of these bottles to do my entire shower which was a bummer. Other reviews mention that it can shoot out (which is very true) and it was tricky getting the mechanic of applying the gel on the grout. It seemed like it was easier to apply it vertically down the shower grout, rather than horizontally across the grout. The only time applying was "easy" was along the edge where the tub and shower tile meet. Application was mildly frustrating and I definitely wore gloves and clothes I didn't care about. It recommends wearing eye protection which I did not do but I understand why and would probably recommend the same for future use. It did shoot across the tub a few times when I was squeezing some gel out. I'd also recommend wearing long sleeve as a tiny bit got on my arm and it did tingle a bit. "A little goes a long way" does Not apply here. Other reviews mention this as well indicating that the best results came from areas where heavier use of the gel was applied. I found this also to be true. Because I had to purchase 3 bottles I would say this was a rather pricey job. If you only have a small area of mold to remove then it would be considered a moderate value but if you have a bigger surface to kill then it will definitely cost more as I found one bottle doesn't get very far. In comparison though, I've spent money on various scrubs and cleaners that didn't produce the same results so take that into account

Using it right now for the first time. So far it’s working great and within about a half an hour I could see the mold going away. One thing I noticed while trying to put the gel on my caulking area in my bathtub, is that the plastic is pretty hard on the bottle and for an older woman without a lot of strength in her hands, I had a very hard time squeezing it out and getting a steady stream. So, what I would say is the application is hard for someone without a lot of strength in their hands. It’s a great product, but it was a workout to try and get that on there for me. My hand aches from trying to get the gel out. My advice would be to try and have someone younger do this for you lol. It’s been a few days since I used this product for the first time and I have to share another benefit with you. Before I used this, the mold was getting pretty bad on my caulking, and it not only was on top of it, but it was underneath as well to the point where the caulking wasn’t sealing the tub area anymore, and it had become brittle and wavy. This product removed all the mold underneath the caulking that I couldn’t see, and in doing so, it has completely revitalized the caulking around my tub. It’s flat now and it is sealing the bathtub again. It’s like the caulking has memory and it’s laying flat now and it honest to God looks like I just re-caulked the entire bathtub. It has completely refreshed my caulking as well. It looks brand new after several years.This product is magic!

Wow! Wow! Wow! What a product! When I bought this, I had some skepticism about it. Another product that claims it was supposed to remove mold. Well, did I get surprised when it actually did. The silicon seal around the base and wall of my shower was getting those black spots that you just can’t scrub off. So this product had good reviews so I thought I would try it. I started with a test area of about 6” as I wasn’t sure how it would react with the Onyx that covered the walls and formed the base of the shower. I left the house for about 5 hours. When I came back, I was amazed. The mildew, moldy black was gone! And it worked the same all around the base of the shower. It’s like I put new silicon down. I would highly recommend this product. It’s easy to use and has great results. Next on the list is the washing machine gasket!

I purchased this mold stain gel remover to clean some stubborn stains in my washing machine, and overall, it worked well. It definitely does the job, especially on lighter stains, and I could see a noticeable improvement after using it. For the tougher, more set in mold stains, it did take a few applications to fully remove them. I do wish the instructions made that a bit clearer upfront, since you may need to use it multiple times for the best results. One thing I really liked was how secure the bottle is, it feels well designed and easy to handle. The smell is pretty strong, but wearing a mask helped make it much more manageable. Overall, I would still recommend this product. It works and does remove mold stains, just be prepared to put in a couple rounds for the more stubborn spots.

I had very stubborn mold and mildew buildup on my bathtub caulk lines that just wouldn’t go away, no matter what I tried. I used this gel cleaner as a last resort, and it completely exceeded my expectations. The gel consistency is perfect because it stays in place exactly where you apply it. I left it on overnight (even though the instructions say 3–5 hours), and the results were incredible. The next morning, I gently scrubbed it off with an old toothbrush—and all the black, stubborn mold was completely gone. It honestly looked like there had never been any mold there at all! This is an amazing product that actually delivers on its promise. I’ll definitely be keeping this on hand and buying it again. Highly recommended if you’re dealing with tough mold stains!

I'll be honest, I went into this with very low expectations. I've tried many other "miracle" cleaners on my stubborn window sill mold before, and most barely made a dent. However, Active Mold Stain Remover completely blew me away. The results are nothing short of spectacular. I applied it to some deep-set stains on my sealant, and it worked incredibly well, far better than I ever expected. It tackled the mold that other products couldn't even touch, leaving everything looking brand new. If you're dealing with tough mold stains and feel like you've tried everything, give this a shot. It actually does what it claims to do. I'm seriously impressed. There was no scrubbing at all. The scent was surprisingly minimal. I applied the product and walked away. I actually left it on overnight, but I didn't need to, the mold was completely gone in a few hours. It tackled the deep, persistent stains that every other product couldn't touch. If you want a set it and forget it solution that actually works, this is it.

I never usually leave reviews but this product worked so well I just had to. My window was so mouldy living in rented accommodation and nothing would get rid of it but I used this and it worked within hours. Couldn’t recommend this more. It was easy to remove with a sponge and the smell wasn’t offensive. It was easy to apply and is a good sized bottle so worth the price.

I purchased this to clean the door seal of a washing machine we inherited with a house purchase. The door seal had seen better days and was quite discoloured. I was hoping this would kill the visible mould lining the seal and return it to its intended grey colour. Applying the gel was straight forward - though it’s worth noting you do need a Stanley knife (or similar) to cut the nozzle of the bottle. There was no overpowering smell and It was incredibly thick which was great for ensuring it stuck to the surface I was applying it to, but it did mean I ended up using more than I probably needed to had it spread a little more. That said, there’s plenty for two applications in one bottle since it’s a good size. I left the gel to work for three hours. It worked well, removing the black mould and only leaving a slight discolouration in its place. I imagine it would be completely cleared after a second application (or perhaps if I’d allowed it to work a little longer). Clean up was relatively straight forward, but you will need plenty of damp and cloths to get it removed fully. Overall, I’d say it’s good value for money.

This stuff works like crazy. The caulking in our bathroom was done poorly and there was mold. Leaving this stuff lifted mold that has been there forever. I should have taken photos but it was gross and a lot of black mold. Would recommend 💯

Great product. I’d definitely recommend it. It completely removed the mold from my washing machine’s rubber seal. The scent is quite strong, so wear a mask