IMAYCC Bike Motor Kit 100cc Motorized Bike Kit 2 Stroke Gas Bicycle Engine Conversion Kit Fit for 26-28" Bikes Black

THIS KIT ISN'T PLUG AND PLAY!!! there is things you'll have to trouble shoot and fix, it isn't as simple as putting it on the bike. the kit comes packaged well with the gas tank and motor in a Styrofoam box. all peices in the kit are quality, comes with a 4 bolt tensioner unlike what is shown in the photos. when you get the motor, align the magneto, grease the drive splines and make sure the piston is orientated in the right direction. the kit took me 3 hours to assemble with minor modification. my kill switch had a bridge between the contacts so check that to make sure thats not your problem if your not getting spark. when installed properly and set up it runs good! break it in on 20 to 1 conventional then run it on 32 to 1 full or semi synthetic for the rest of its life. Id recommend upgrading the exhaust and the spark plug as you start as with getting a 36 tooth chaining. dont buy this kit if your not mechanically inclined, it doesn't just bolt together. great deal for 140$

Huge fan I bought one of these and some other brands and this one has way more torque just a better engine overall

The kit comes with everything. The you’ll tools and hardware. In my case the frame of my bike didn’t really want to cooperate and I’ve had to do several modifications so the motor would fit. I had to take the chain guard off so the motor would come down as far as it could. I then manufactured a homemade spacer for the bottom of the motor mount out of the heel of a boot. Seems to be holding up fine. The next thing is the carburetor doesn’t seem to be wanting to stay securely in place. I’ve tightened it about as much as I can without feeling like something is going to brake. Still loose. Next the muffler can be modified by cutting the baffles out. Gives you a little more speed. I tried to take the nut loose off the bottom and it broke off. I think the hurdle can be crossed though. With a little modification. Lastly the sprocket that comes with this kit is difficult to install on coaster brake rims. I recommend putting the extra money into a hub adapter sprocket that has a hole big enough to allow for the brake arm. Or one that requires little grinding to fit. You’ll have to put it in a vise and bend the arm so it’ll clear the sprocket. Overall the kit seems pretty good. I like how it comes with all the tools; except for a drill. Good value for money. However, it does seem slightly cheaply made. You can definitely tell these are mass produced and the customer (you) is quality control. Some pieces of valuable knowledge I’ve gained from building a few of these….Use thread locker on exhaust bolts! Really, use thread locker anywhere you can, because as you ride things loosen especially during brake in period. Keep a few wrenches handy as you ride. Before you go ride, check your bike. Make sure nothing is loose. Check tire pressure and wear a helmet. Going through a few check points will help you have a better ride experience. Always check for loose parts. always check for loose parts. Always check for loose parts.

The kit is nice but within a week of usage I had to replace the leaking fuel shutoff and exhaust gasket. It doesn't idle on its own, if you adjust the carburetor to idle you lose all power. Save your money find a better kit.

Bought to resell, worked out well. Fairly easy to install. No negative feedback. Would recommend for an inexpensive around-town vehicle for the do it yourselfer.

Just what I was looking for. #1Motor arrived very quickly and was exactly as described. #2 Package was smaller than I had expected but was very secure and despite the box having some slight damage from shipping process there was no damage to any of the contents. #3 Installation was a breeze with the provided instructions and the different components/parts being individually bagged and labeled with numbers that corespond with the assembly instructions very well. #4 Took about 2 hours from unboxing to have it installed and riding it. #5 Motor and components for the most part seem to be built with quality materials with only one complaint and that would be durability of the fule filter "See attached picture" Damaged occured after motor was installed and most likely was due to human error. #6 Overall I am very happy with my purchase of this motor kit / seller and will be doing business with them again in the near future. I plan to order another one for my nephew and install it with him as a birthday gift. He loves riding mine and asks about getting one for his bike all the time.

Thing is perfect let’s face it it will never be faster then an electric but the sound is phenomenal The only thing I’d say. Is have patience with it and you might. Want a new chain tensioner from that it’s good you will be needing a ratchet or wrenches on the side becouse the ones they send are awful and run it a little slow at the start it is a fairly easy set up took me about 4 days to put on videos do help but some leave you in the dark the build is good and it gose on it’s durable and is a good value compared to an e bike it’s not a plug and play but loud and fun it fits good on a v frame and like I said is durable mixing gas and slapping ass you feel me

Good engine it runs smooth and comes with tools also everything you need to assemble. The engine is powerful and gives great performance.