3D Printer Enclosure for Bambu Lab A1 Combo/A1 Mini Combo with AMS Lite,840X570X570mm Enclosure Large Size Fireproof Dustproof Tent Constant Temperature Protective Cover

If you're serious at all about 3D printing, I highly suggest investing into this cover! I bought if for my Bambu A1 mini with AMS. Although the A1 mini is awesome, I noticed after just a couple prints that my filament was starting to fail. Upon some research, because the humidity and temperature in my house, it was effecting the way the filament printed and stored. Especially my Silk PLA. After setting this up and drying my filament, I've had great success on all prints! It does a fantastic job of maintaining temperature and humidity for my prints. Also helps reduce noise and smell. It has PLENTY of space for me to store all my extra filament without having to buy a special case for them all. Even with the regular A1 size, I feel like it would have plenty of space. Super quick and easy to set up! Highly highly recommend for anyone that has an open style printer. Well worth the money!

If you have a bamboo lab A1 or A1 mini either with or without an AMS, this enclosure allows you to run your printer in a much more stable temperature environment. Put a HEPA filter in there and you’ve got a little bit of air filtration to allow you to use your 3-D printer indoors much easier.

While it works, it doesn't leave enough space in front of and behind the bed for it to move it's full range without the cable hitting the enclosure in the rear, and the bed hitting it in the front. While this hasn't caused any noticeable issues for me so far, I imagine this could cause some serious problems in certain circumstances. Quality is good enough overall, but the top has no center support and sags internally. The bowden tubes running between the AMS Lite and the hub will be permanently rubbing against the top of the enclosure unless you brace it somehow. I used some cheap 1/2" pine lath and just measured and cut it to sit secure on top of the frame. Mounted an EvaDry rechargable desiccant with motion activated led ring light to it as well. I enjoy the pockets and appreciate the included hygrometer. It was also very easy to assemble.

Perfect size for the Bambi A1 combo. Easy to access machine and filament reels, even while in use. Perfect protection against dust and if you’ve got curious animals in the house. Seems pretty sturdy. The assembly was really easy.

Its what I expected, a poly style enclosure. Its heavy gauge plastic with huge zipper panels for easy access to the printer and AMS Lite. Enough cable pass-throughs. And 3 mesh pockets, that I'm going to assume are for desiccant packs. Its printing clips to attach a light strip to the 12mm carbon frame tubing. And it did quite it a good bit. Not the the Mini is loud, but I barely hear anything now id see if it holds heat well.. But I'd say it was money well spent.

This enclosure works well and assembled nicely, but for PLA it adds more problems than it solves. It’s probably needed for things like ABS and other high temp filaments, but 99% of what I’m doing is PLA.

Works great for my A1 with AMS top mount. The hygrometer is nice but this tent helps regulate heat inside and keeps the fumes contained which is exactly what I was looking for.

My Bambu A1 is in the basement where temp can get a little low in the winter. I was having issues with prints not adhering to the bed because of that. Not a problem anymore. Just the heat from the printer and bed raises the temp to the mid 70's. My A1 and AMS fit great. If your printer is in a cooler space, I highly recommend getting this.