Carlisle Turf Saver II Lawn & Garden Tire - 15X6-6 A

Great tire. Best product for the price if you know how to install and inflate. Only 1 way to inflate a warped tire caused by shipping. Use carb cleaner to ignite the tire bead. Place tire with rim installed flat on ground. Connect air supply leave running. Spray the bead of tire/rim with carb cleaner then ignite slap the tire to shift making sure to keep hand clear incase hot gas escaped. If it fails to inflate then flip it on the back side and repeat. Usually it works every time on the second ignition. Make sure not to let it burn more than 10 second at a time. Follow standard fire safety procedures.

I put theses tires on a 25 year old John Deere LX172. The original tires were the same rounded edge tread design, which turned out to be very hard to find. These Carlisle tires are nearly exactly the same design and despite being the same stated size they are slightly narrower then the originals, but are the same diameter. I messed up my order and had to order 1 tire at a time. Both came only slightly squished at the bead, but spread out easily and were easily seated on rim. The mounting was another matter being very difficult for this very experienced tire changer but that was somewhat anticipated. The smaller the diameter of the wheel the harder the mounting process. Now for some mowing without having to air up tires every time beforehand

Mounted this at home without a machine. It was tricky and took two men and a ratchet strap to get it to hold pressure. Once I got air in it, I had no issues.

Seem okay but brand new they have less traction than the original Carlisle turf tires. The only visible difference is the "hollow" tread lugs vs the solid tread lugs on the originals. The new "hollow" lugs get far less traction on pavement. Otherwise they're fine.

I really like these tires. I would buy them again. Unless your going to have someone put them on for you it is a pretty good job to install them. Mainly because of the size of the tire. Just a bit hard to hang onto. Well any way I love these tires. As for the future Im designing a fixture to hold these little tires still while changing....

I had to go to a tire installation facility to get the tire mounted. All the YouTube videos had me concerned about safety. Glad I did. The guy mounting the tire had a real hard time. Small size and large width made it hard to install. Bottom line, the seal didn't hold and the tire went flat. I overfilled it with air and it sealed. No problems since. Very satisfied. I would buy this product again.

I bought two of these. It was a complete waste of time and money. They both were packaged in a way that smashed them. I spent 3 hours changing the tire and trying to get air in them. Since they were smashed and malformed the bead wouldn't set and air would just leak out. I ended up taking them to a tire shop. It took 3 techs all working at the same time, so all 6 of their hands, to get any sort of seal and then use a high flow air compressor to get air to stay in the tire. They finally got it. I thought I'd save money by just getting the tire and putting it on myself. It ended up costing me more than if I would have just bought the whole wheel with the tire already on it. It also would have been a lot less aggravating to just buy the whole wheel.

Still using them

Ordered 2 but only received 1 . Supposed to be getting refund on master card though . The one works great tho.