YOUSU 3D Printer Filament Galaxy PLA Filament 1.75mm, 3D Printing Filament Bundle, Multi Color PLA Filament Glitter 250g X 4 Color Pack.

Pleasantly surprised! Printed some dragons and they look great! Changing the orientation of the print will yield different colors. See video. The yellow comes out more of a gold and the red is more of a magenta. You'll get shades of purple and green as well. Rainbow filament basically. Structurally, same as any other silk filament. As in, more brittle than normal. Pay attention to the geometry that the slicer outputs. With dragons for example, you want your links to be at least 4 lines wide (1.6mm) or the kids will snap the plastic. Bed adhesion is as expected. I have a Ender 3 V2 with a glass bed. Needs gluestick for this filament. Temperature tower showed 200 as the optimum temp. Anything higher and you get whiskers and strings everywhere. The spool I got shows no issues of tangles and color orientation looks consistent throughout (there are windows on the spool) What can you print with this? Mostly larger curvy organic shapes. Large flat surfaces don't look that good as the color gets splotchy. Flat tops and bottoms just look like rainbow noise. Small details as well. The just look grey from farther away. To summarize, with the right model, results are top notch.

I am seriously impressed with this TPU combo pack! The colors (Blue, Green, Yellow, and Purple) are super vibrant in normal light, and the glow-in-the-dark effect is just incredible. I printed a set of gummy bear models to test it out, and they came out looking amazing both in the light and when glowing. The filament feeds smoothly, has great layer adhesion, and is flexible without being too tricky to work with. The glow lasts a surprisingly long time once it’s charged up under light, and each color has its own unique glow effect that really stands out. This pack is a perfect mix of fun and quality—I love having multiple color options in one set. If you’re looking for a TPU that’s flexible, reliable, and also adds some serious wow factor with glow-in-the-dark, this is the one to get. Highly recommend!

This is some pretty good stuff. Shocked me, really. I was able to print a dragon (super clean) and an Igiris figure (about 7 inches tall). I did lose a bit of quality on the Igiris print due to it being a filament and not a resin printer. But still came out amazing considering. I didn't have the stringing or other problems like I have with the Sunlu products.

The purple one doesn't glow to well but the other colors are great. However there not as big as I was hoping.

It behaves like normal TPU... But it glows! I've made a few things with each color, but haven't encountered any clogging. Like with most TPU's, it's easy to use and you can expect some stringing. The consistency is like that of most other TPU's I've used. I love how each color pops in its own way, the purple is as dark as the yellow is bright. The blue is brilliant and the green is nice and fluorescent. After charging with a UV light for a few seconds, you can expect the blue and green to be the brightest, by a mile. The yellow tends to glow dark green and the purple tends to glows dark blue. Overall, the quality is top notch.

They are great and print well but don't really glow. I printed 2 Pikachus in the green and light blue and set them in the sun for 2 days and still don't glow. The colors are cool though.

The glitter in these items make the prints sparkle in the light. I ran these using the generic PLA settings on my printer, and did not experience any feeding issues or clogs. I did run them using my external spool holder, and not my AMS. The Galaxy Black has multicolored glitter. The item I made, using vase mode, allowed the sparkle to shine through, but the black filament color allows enough light through, to make a stunning looking light or lamp. The Glitter Gold Black is the black base filament with gold glitter, and the clear glitter layer again allows light to shine through. The Black Colorshift is a bit different than the ones with glitter pieces. You get a much more uniform sparkle throughout, which makes the color very even and consistent. Finally, the Green Starry, is like the other glitter / black colors. While the green glitter shows fairly well, it isn't quite as prominent as the multicolor or gold. Overall, I would say the material is good quality and performed well, as the pieces I made seem quite sturdy, especially the little articulated caterpillar. I would buy these items again!

It's not the best filament... the glow don't last long it smells really bad when printing like a strong chemical. It's very brittle! When I opened the filament to put it into my printer the filament broke just by pushing it though... then when I print something like a fidget toy it breaks only after a few uses. Wouldn't recommend this product. Cheap Cheap. Spend a few more dollars & get better quality filament

Ottimo filamento TPU, stampa con settaggi generici con BambuLab X1C perfetti!

Well worth the money

Rimasto davvero sorpreso .Il prodotto si presenta benissimo ,ben sigillato sottovuoto.Il filamento è avvolto benissimo intorno alla bobina cosi da non presentare intreccio e scorre benissimo.Con le giuste impostazioni stampa perfettamente .Super consigliato

Impression impeccable et rendue parfait, je recommande