RunCam6 4K

Great addition for RC fixed wing recording. Good stabilization, great recording. Overall is a great camera.

Update: died after 5 months, company wants me to mail the camera back to China for evaluation. Removing 1 star. I bought this to mount on my bike handle bars for recording any accidents or close calls while cycling. I ran it for several hours continuously through 90 degree weather today and it never skipped a beat. The RunCam 6 stayed below 119 deg F, the Thumb 2 hit 140 deg F and shut off after about 10 minutes due to heat. This camera draws about 2.1 watts, the Thumb 2 draws 2.9 watts and is much smaller, which explains why that camera overheats. The LED display and LED lights make it easy to see that it's recording. Wifi connection was easy to use, and I was able to review files from the camera on my phone. I am using the RunCam 6 without the battery, I have it powered from USB-C using a portable battery. The Pre-record (called flashback in the manual) works great, I get about 7 seconds of recording from before I press the record button. The quality of night recording is great. The resolution and optics are good enough to easily read license plates 35+ feet away. The image stabilization is not good, footage is pretty much unwatchable, even after going though Gryoflow. I bought this just to record any incidents or accidents, so the stabilization isn't that important for me.

Great camera for all around use. I use it for flying videos on my Rc aircraft

So far, I'm not very impressed with this camera. I haven't been able to get it to work well with Gryoflow. In fact, their online documentation specifically recommends avoiding RunCam cameras altogether, and now I can see why. In addition to sync issues, the sensor data seems to be unreliable as well. The "horizon lock" feature in Gyroflow not only doesn't work, it causes the video to tilt and spin in all directions. However, an even bigger problem is that the video recording stops randomly when attached to an RC vehicle. When I use it hand-held, it continues to record for as long as I'd like, but when I put it on a vehicle, it stops recording randomly between 1 and a half to three minutes. This happens while using it in a stand-alone configuration with a micro-SD card with plenty of capacity (128GB) and a full battery. I haven't tried it as an FPV camera or with an external power source. The last video I tested on a vehicle stopped at just short of 3 minutes, and the end was scrambled and distorted, almost like it wasn't able to continue to record to the SD card. Maybe it's shaking loose? I found the built-in EIS camera stabilizing feature not to be very useful for my application. I also found that the Go-Pro mount attachment was a little loose, so I had to shim it to keep the camera from shaking. Aside from the Go-Pro and tripod lug adapters, there's no good way to attach the camera holder to anything aside from double-sided tape or adhesive backed hook and loop strips, which I'm not sure I would trust by themselves on the outside of an aircraft. Especially if you want the camera to sit close to the body of your vehicle, you probably need to be prepared to DIY a secure camera holder for this. I also don't think the image quality is any better than my out-of-date cell phone camera, but I kind of expected that based on available information and other reviews. If I am able to overcome these issues, I will update the review. Like many budget electronics, there may be some hoops to jump through to get it to work as expected, which is fine, but so far, it hasn't worked for me.

Nice camera.

Had high hopes, camera has definite latency, but that can be overlooked, camera would lose connection with app at slightest obstruction. for an FPV camera this will not work unless you are just wanting to let it record and watch later. I need a true FPV real time camera.

Takes great video but the way it works is clunky. Also cuts off sometimes it's just a crap shoot if you're gonna get the whole video. But when it works it does good

Video Quality Is Beautiful. That’s probably the one thing that says camera has going for it. Other than that, battery life is very short, and if you try to anchor it to Velcro on top, it will shut off. Not recommended unless you feel like continuously working on it or fixing it.

SONYやinsta360やDJIも持っていますが、光学手ブレ補正となると一気に高額になります。そういうの要らないし小型で軽量でもっとカジュアルに遊べる熱停止せず壊れないカメラでピッタリだったのがこのRunCam6でした。4K画質は申し分なくコスパ良すぎます。願わくばカメラのセンサー、画質はそのままキープコンセプトで、次期型は5Ghzだけ追加対応してくれるともう神です。前モデルRunCam2 4Kから気に入って使ってます。

Works great

以前使っていたRuncam2よりはるかに画質は良い。操作もしやすいし熱だれもしにくそうです 耐久性はまだ分かりませんが衝撃など加えなければ大丈夫だと思う

youtubeで調べても、特に日本ではまだメジャーじゃない感じはします。そもそもドローン用で発達したシリーズかと思われます。 このカメラの良い点は、 ①撮影中も、wifi接続でスマホでリアルタイムで動画を見ることができる ②バッテリーを取り替えることができるので、予備さえあればずっと使用できる ③軽い ④性能の割に安い。 扱う注意点は ①予備バッテリーはRuncam直営ショップが安いので、国際便で買うのがおすすめ ②手振れ補正はフリーソフト・ジャイロフローがオススメ。このソフトを使わないと「手振れがひどくて動画が使い物にならない」という低評価をしてしまう。撮っただけの動画を手振れ補正してナンボです。 ③４K,HD、50fps、50fps…さまざまな設定で撮影できるが、ジャイロフロー対応の設定があるので、その設定で撮影するのがオススメ（気になる方は、ジャイロフローで調べてください） Insta360 GO 3Sが欲しいけど高すぎると思っている人（私も）は、このカメラおすすめです！

アクションカメラとして使う場面はあまりないのですが、 画質がきれいで、USBカメラとしても極めて優秀です。