Cooclensportey 16 Pack 4 Types Fuse Tap, Upgraded 12V Car Add a Circuit Fuse Tap Kit - Standard Mini Micro2 and Low Profile Mini Fuses Taps, ATO ATC ATM APM Fuses Adapter Jumper for Cars Trucks Boats

Wow, where were these years ago. These sure make hooking up things like Dash cams very easy. Well made and this kit gives you multiple options. I will purchase these again.

These fuse taps are great. The concept of being able to pull power from a circuit without needing to splice in or run an entire new power line is extremely convenient. These allow clean work that can be permanent, or temporary, which I really like. I have nothing bad to say about the taps at all. The fuses on the other hand seem to fall apart almost instantly if you insert them and need to pull a fuse out for any reason. These taps are extremely tight fitting so a fuse is really wedged in and requires extra force to take out. These fuses come apart and break far to easily when pulling them out. So if you are doing a wiring job and you may need to move things around a bit, I would plan to have some quality fuses in hand. The crimp on the end of the tap wire seems to work fine with the few I tested. If your unhappy with that crimp connector, just cut it off, strip the wire end, and use whatever you prefer. There are plenty of sellers that seem to be selling the exact same taps on here, just some include more or less. This particular listing was priced right, included a nice assortment, and has already done a few jobs I have been waiting to do and are holding up well.

They function how you woukd need them too, they aren't expensive and you would pay about the same price for one or two at the auto parts store. They have sizes for every type of fuse. And are pretty good quality.

These are okay quality and they do work. Shipping was fast and the price was right. I just wish they included more fuses and a better assortment (different sizes/values), because what’s included wasn’t enough for my needs. The crimp ends were also a little iffy (I had one wire pull out) and didn’t feel super confidence-inspiring, but once installed, they’ve been working fine. They are easy enough to install; simply pull a fuse and pop this in its place. A much easier and safer way to power on ACC devices or get a remote signal to amps (I am doing both).

These fuse taps are a quick and safe way to add access to 12V vehicle power for accessories such as CB, GMRS, or ham radios. The variety of fuse form factor/size offers compatibility for most modern vehicles. Quality is good--insulation seems thick enough to be safe yet flexible enough to facilitate easy installation. All said & done, these function as intended while offering proper overcurrent protection to maintain needed safety. I am happy with my purchase.

I personally purchased these piggyback plugs for my Mercedes Benz so they are a bit sensitive when it comes down to the electrical connection and it will throw out a error code on the dashboard and it is so annoying to have a error code on your car. So I ordered these for the connection aspect of the plug it tapped into the wire clean without cutting the wire and shortening the power flow to the wire and then I just plugged it in to the fuse that I wanted to use and then I put the same amp fuse on the other side of the plug and then I plugged it in and it worked perfectly. I have some additional accessories that I would like to add on my car and I will be using them to help it easier for me because I’m going to wire them up to an auxiliary fuse so they can work the accessories that I am adding when I start the car. So I would recommend using these piggyback plug in fuses for simple, clean and quick applications like this one that I have used on my own projects.

Great fuse taps with fuses

I bought these Add-A-Circuit fuse taps so that I could install aftermarket fog lights into my mom's 2014 Nissan Versa Note and my girlfriend's 2013 Toyota Corolla. This is definitely the way to go if you need to tap into a circuit. On the Versa Note, the fog light kit connected directly to the battery, so the only thing I was powering was the accessory switched wire for the lighted button. On the Corolla, the fog light kit draws all its power from the interior of the car near the light switch and fuse box. Luckily, the Corolla had several empty fuse lots that were still wired to ignition, so I was able to give the fog lights their own dedicated circuit without having to worry about drawing extra amperage off another circuit. Regardless, both cars used the mini low-profile type fuses. I like this kit because it comes with all the popular fuse types. I do a lot of car stereo and other accessory installation, so having these in my electronics drawer is a must anytime I need to pull power from a fuse/cicuit. I'll probably order a few extra of the mini low profile taps since I already used 2 of the 3 that came in this kit. Better to be prepared. Don't be a hack and shove a bare wire into one of the fuse socket. Use these and make your installation atleast semi-professional. It does come with fuses, but I bought a box of other fuses anyways so that I have the right amperage for whatever I'm doing. I recommend buying additional fuses, there's no telling if these fuses that came with the kit are good quality or not.

I only needed a few to install my gauges on my Infiniti. Purchased some from an auto store to find out they won’t work with my car. Bought these ones figuring I could use the others elsewhere. They worked great, has enough wire to have some play. Good quality, only issue I had was the fuse slot on the item was extremely tight. But easy to install in my car, and 10/10 worth the price.

Son funcionales.

These are a great item if you need to add an additional fused item to your car's fuse panel.

works but cheaply made.

GOOD PRICE AND QUALITY