5050 RGBWW RGB+Warm White(2700K-3000K) 4 Colors in 1 LED 5m 16.4ft 60LEDs/m Multi-Colored LED Tape Lights IP30 Non-Waterproof White PCB DC12V(Power Supply&Controller are NOT Included)

Lovely item but be warned that the strip is a full 12mm wide so it doesn't fit many aluminium profiles. Even some that say they are for 12mm strips don't fit. So great item but just make sure you get a profile with lots of space. Give a wonderful bright light. These really are very nice indeed. Much better spread of light than the older, cheaper strips that have an RGB LED and separate or no white led. Course you pay for it, but if you need high density, even lighting then these are the only option. The strips have a very high density of LEDs and they are super bright. I used them for backlighting a large wall mounted monitor and the overall effect is stunning. The strip has power connections at both ends and you do need to use both if you use more than half the strip. I experimented and found that at full load (120W) the wires will melt if you only use one of the connections. What I do is to cut the strip in to appropriate lengths, no more than 2.5 meters each. You use those kits of connectors to go round corners or add extra power cables. If you want to backlight a TV, that works out at about two individually powered strips that are 1.6m each for a 50" TV. Each strip has one corner in it. It's a fiddly process, but it's worth it. These strips are awesome and the final effect is amazing. The prices is too high now. There are other identical products on Amazon for a lot less money. So while the product is still a great product, you need to fish around for the best price. Highly recommended.

I have this stuck round the back of my tv and the brightness is far better and it produces colours like orange to match my fire (See image with Orange set at 30% brightness) loads better than other cheaper led strips and the RGB white (when blue red & green are all on together) is nice and white unlike the blue colour you get from the cheaper LED strips. I bought this because I wanted a really nice white, but if I’m honest a good quality LED strip produces a good enough white without being 5 pin with a separate white. I’m not sure if you can access the separate white without using the app, as if you ask Google/Alexa to change the colour to white it will use the RGB 255/255/255 white instead of the separate white. This is worth the extra money but be warned if you have other cheap LED strips in the same room It will make you want to upgrade them.

Excellent product & value

Nice colours, easy to install.

Fast efficient seller, A1 Value for money, recommend to anyone. Thank you

Had it before, great. Last one, plugged in and checked - fine. Carried out awkward installation to ceiling and had to plug in at other end of tape tested.... disaster. No red, white and blue reversed. Bad connection under manufacturers shrink wrap at one end. On old good tape, the mismatch between power lead and led tape colours corrected by crossover soldering under the shrink wrap at the tape.......not this time. At the power connector feed end..... the red not soldered on at all. Good job I can use a needle head soldering iron or I would have had to wreck out part of my ceiling to replace the assembly. Moral.... CHECK TAPE WORKS FROM BOTH ENDS and return faulty stuff before you mess with it. The manufacturer should do this

Ordered this item but was sent 24v led strip which of course doesn’t work with my transformer or dmx decoder. I build lighting systems that are built into props and scenery for use in theatres, and will be returning this product.