10KG PETG 3D Printer Filament, High Strength, Low Warping, Odorless, Dimensional Accuracy +/- 0.03mm, 10 Rolls Spool(22lbs), 1.75mm, Black

I was looking for some cheap prototyping filament to reduce costs during print testing and refining issues related to form and fitment of 3D designs inherent in the CAD designing process, and wasn't concerned about color, or type for that matter, and at about $10 USD/ Kg I went for this stuff, as the PLA I was using ranged anywhere from $15 to $30 /Kg, but man did I get more than a bargained for! When it arrived, I dried a roll, did my standard calibration like I do on any filament and set up a filament profile for it, from the first calibration print even with the generic PETG profile I already noticed it started out better than most, but after dialing in the settings, this stuff prints absolutely amazing! I have used about four rolls so far, and the consistency between rolls is top-notch, and so far I have zero stringing or clogging (in fact the only print failures I have had have been traced to the files on a few I have rushed through the design process and missed a couple of gaps in the geometry causing a bad mesh, I have had zero filament related failures). And as a surprising result from PETG this stuff sticks to the bed, and remains in place the entire print, but releases cleanly and easily upon completion, all with no glue or other adhesion modifiers to worry about, which combats the main issues I have had with other brands of PETG (some brands would have poor adhesion and come loose from the bed mid print without glue, or others would tear up the bed or leave fragments almost embedded in the plate that were nearly impossible to remove if you didn't use glue), I had long sense accepted that this was just a caveat of using PETG, but so far this product seems to retain the strength and rigidity of PETG, while having the ease of use and versatility exceeding that of standard PLA at a lower price point. I just ordered more, and what I originally intended to be a cheap solution for prototyping or test prints, is quickly becoming my primary filament for quality finalized prints with little to no post-print processing.

Very good, low stringing, solid filament at a good price point,

first time using kingron and it was great! i used 9 rolls on a 2 week bring and barely had any issues. this is definitely my go to petg

Really surprised by how well this PETG performs. Generally speaking, PETG isn't exactly meant for high-speed printing, and the manufacturer specs tell you to keep things slow. But I decided to push it and cranked up the print speeds way past the recommendations. ​To my surprise, it kept up flawlessly. The extrusion was consistent, layer adhesion stayed rock solid, and I didn't run into the usual stringing mess you'd expect when pushing this material too fast. ​Bottom line: If you need strong, functional parts and don't want to slow your printer down to a crawl, this filament actually handles the speed brilliantly. Highly recommended.

Purchased with high hopes after reading that it printed well after you dry it. That's a big reason why a lot of folks new to printing have issues and rate things poorly... they don't think they need to dry new filament. i opened 4 spools and dried them for 24 hours. only one of the 3 printed decent and it was a small portion of a print. the other three rolls i tried at different bed and nozzle temperatures, tried different brands and styles of build plates, and different types of nozzles over many attempts to print. stringing was immense and bed adhesion was poor on colors outside of black and white. I am stuck with 12 unopened rolls that I will try because I have them but it seems to be money wasted. Buyer Beware!

I’m very impressed with this kingroon Petg. The first things I noticed upon opening the package were the nice plastic spool and the neat winding. Nice job kingroon! I usually preemptively dry all my Petg before even attempting to print with it because I live in a humid climate. I didn’t this time because I wanted to see how good this filament can be right out of the package. Well, it’s definitely good! The only problem I noticed was some oozing coming out of the nozzle when the print head sits idle and warmed up. This is to be expected with undried petg in my experience. Not taking any points off for this. The first thing I did was calibrate the pressure advance and flow rate. Then I sent a benchy over to the printer for a good test. It turned out really well! The overhangs are nearly perfect And there is almost no stringing at all. I would almost say it printed better than the other big name Petg filament makers I normally use. I’m probably going to be making a switch to kingroon for my Petg prints after this great first impression. The color of this red seems like a perfect fire engine red. It’s not a bright red but it’s not a dark dull red either. At this price point, if every spool of petg is this nice, you honestly can’t beat it. If you’re weary of the brand name kingroon because it’s not a big name like eSun or Polymaker and it’s cheaper than them, don’t fret! Buy a spool and try it out for yourself. 100% worth it.

I recently made the shift from a resin printer to the Bambu P1S, and after running out of the sample PLA, I grabbed this Kingroon PETG 10-roll bundle to experiment. I couldn't be happier with how it's performed. Prints have been flawless right out of the box all year, using just the default generic PETG profile. The only hiccup was user error was me letting the AMS humidity hit 30%, which caused stringing. I simply dried the filament and refreshed my desiccant, and it was back to flawless instantly. Price and performance are truly hard to beat for this bundle. Plus, customer service was responsive when I asked about food safety and got a reply in just a few hours. Now if only I could stop running out of filament so fast! Highly recommended for anyone wanting reliable, great-value PETG.

Terrific PLA for the price. Print consistently and I have not had any tangles. I've been consistently buying/printing with this PLA with no issues. However, the whites are inconsistent. My picture shows 2 separate purchases, the earlier white spools are very warm and this new spool I got is very cool white. Not sure which one is the new normal, but this cool white spool is the more recent purchase and is quite drastically different in temperature. I'm sure it would look weird to mix with previous spools.

Does the job perfectly

So wie ich es mir vorgestellt habe. Super schnelle Lieferung dafür meinen Riesen Dank ich musste meinen Druck nicht abbrechen. Das Material genial ,ich kannte den Hersteller nicht, bin aber mega begeistert. So muss es sein, da braucht man keine Bucht mehr.

Great,