2" Adaptor Sleeve for Weight Plates

Thank you for all the previous reviews. They we're correct to recommend this product. I've put together a few home gyms and I always end up needing to get an adapter for the olympic style 2 inch diameter plates. These fit perfectly on my power cage. They have a steel set screw that is very sturdy. Also my advice to others that may strip their set screw and have a hard time with adapters loosening up simply put silicone inside the adapter, set it on the post your adapting and let it set for a day. They will never loosen after that. Usually if you have the 2 inch diameter weights your not switching back and forth between the 1 inch diameter plates so you'll want your adapters to be permanent.

recieved an all-metal adapter sleeve. heavy-duty construction, solid fixing screw, has a small retainer 'lip' on the backend to keep the 2" olympic plates in place. I've had no complaints whatsoever; works great. The only "issue" I had was that the weight plate receiver pin on my leg extension adapter is about 1-2 inches longer than the adapter, so there's a small bit of offset on the backside due to the adapter sleeve not sliding in flush all the way to the end of the receiver pin, but it's not a problem in my case.

This product was exactly what I needed. I was minimally upset that it did not come with the screw to tighten it down to the bar, although it did come with the hex wrench. For my purpose it is only for my leg raise machine so the screw is not all that important. Had it been for a bar, I would have been considerably more aggravated. Over all it is solid and will hold up to everything my family can put it through. And the additional bonus was that it did ship and arrive very quickly.

Bought these to add to my Valor Fitness cable machine and they work great. Easy to install and seem to very high quality. Been using them for the last six months and they look just like they did when I installed them. Like the fact that I only have to have Olympic style plates in my home gym. Great product

I ordered this item to install on leg extension bench so I could use my Olympic plates, and it fit perfectly. I am satisfy with the purchase. This adapter is metal and it works better than the plastic ones, I tried other brand that were made of plastic and keep having issues trying to fit my plates. But this one the plates went smooth and fit perfectly in .

I recently bought a cap weight bench that came with a leg extension and leg curl attachment that only had a standard size peg on it. I attached this awesome piece from valor fitness and turn it into an Olympic style peg. It was very easy you just need to get your allen wrench and tighten the screw down onto the other peg. Now the plates can slide on and off with ease and they stay put (olympic plates). For a small price of $25 it really transformed my equipment to what I needed so cool that they make these I don't normally leave reviews but I had to for this

Works well with some assembly required. Guide holes for hex screws were not fully machined making it unable to he tightened against standard bar. Instead of bother with return, I used some oil and an impact hammer to feed/unfeed the screw in small increments until the threading made it through the other side. About 10 min and they installed fine after that.

The Valor Fitness adapter was easy to retrofit onto my calf raise machine. I first had to add a couple layers of duct tape to the original post so the adapter fit snug. Then using the set screw to hold the sleeve in place. The Olympic plates fit well onto the sleeve and after several months of use the sleeves still hold strong and there is no damage to the sleeves. Yes some of the shiny paint has rubbed off the sleeves but this does not deter from the function of the sleeves.