100 GPD Reverse Osmosis Membrane Water Filter Replacement for RO Water Filtration System-NSF Certificated (1)

I switched to these membranes a while back. I use them at work with DI after the RO system. Most importantly they always reject at least at 99%. I use the 100 gpd. With a permeate pump it will perform better and make water faster by about 80% when used on a drinking water system. I consistently see the tds at 1 or 2 ppm out of the membrane. Not the case with a lot of other membranes.These hold at 99% for a long time like a year or longer. Really depends on the incoming tap water temperature. tds, pressure and a water softener really helps RO systems run really pure. Then for drinking I use a mineral cartridge to add back in higher ph, Calcium and magnesium. So it will go from 1 or 2ppm to around 40ppm after the mineral cartridge. My customers tell me I turn them into water snobs..That’s how much they like the water including myself.

Larger capacity RO membrane unit. Excellent replacement cartridge, excellent value.

my tap water is around 300ppm. I'm getting it down to 9ppm with these filters. I'm running two 100gpd membranes which is making about 140 gallons per day at my regulated 40psi of household pressure. I kinda wish i bought the 150gpd membranes so i could be closer to a true 200gpd. I'm sure if i hooked it up to my unregulated hose bib on the side of my house which is 80psi i would get that but last time i bought 150gpd membranes i had much higher ppm for my filtered water, so I'll stick with these for now. Biggest thing for me is they work and get me very close to 0ppm

Changed my 6 stage filters out and gave me 31 gallons before it started only giving me a drip or 2 in hours. Bought these as a " fix the first thing and then move on to the next if it doesn't work." 2 hours later the storage tank gave me 6 gallons(full draining). Waited another 2 and same thing. This filter is the real deal and cheap enough to not hurt the wallet.

I have hard tap water and pretty high PSI I checked my TDS coming it at 256-259 TDS. After the Geekpure membrane I am reading 13-15 tds. Average Rejection rate of about 94.92% okay rejection rate for this cheap membrane.

Can't beat the price tested doing his job and I have very bad water 1200 BPM price was excellent had no problem with fit nice to see the price come down on membranes

Does not work, don't buy these knockoffs!

Very good quality

Fantastic RO Membranes. Used a few different makes over the years but these perform well and give a consistent high quality permeate water output. I live in a hard water area and these membranes work their socks off to give a permeate output of around 6ppm.

Das Produkt entspricht genau den Beschreibungen und hat meine Erwartungen voll erfüllt. Die Qualität und Verarbeitung sind sehr gut, alles wirkt stabil und durchdacht. Besonders bei dem günstigen Preis ist das Preis-Leistungs-Verhältnis absolut überzeugend. Für mich eine klare Kaufempfehlung!

Adapté à mon osmoseur sous évier. TB RAS.

utile

I have been a repeat buyer of this item. It does the job well.