Wireless Vibration and Magnetic Alarm Anti-Theft Remote Control Door And Window Security Alarm with Light (Vibration Magnetic Light)

Description

Parameter： Operating Voltage(battery) 3.0 (2*AAA battery) V Average standby current ≤120 uA Standby current when arming ≤150 uA Current when alarming ≤110 mA Voltage when alarming(30cm) ≥108 dB Vibration sensitivity(Top level) 10~60 g Receive frequency 433.92 +/-1M MHz Receive sensitivity ≤-105 dBm Voltage test when low power 2.4 +/-0.1 V Battery Standby lifetime ≥12 Month Magnet detect distance ≥1 cm Wireless Control distance ≥20 M Remote Operating voltage(battery) 12(27A battery) V Standby current 0 uA Transmit current ≤10 mA Transmit frequency 433.92 +/-75K MHz Transmit power ≥-30 dBm Battery standby lifetime ≥12 Month Note: Operating Temp. : -10~40 ℃ Storage Temp. : -20~60 ℃ Installation: Select windows and doors to the installation location, with water and cloth to clean the mounting surface, the double-sided adhesive tape on the bottom and then this machine is attached to the clean position Installed host, and then double-sided stickers magnets host next door or door frame, pay attention to set the magnetic iron arrow at the arrow to the right host. Ensure close the door the host and the magnet installation distance should not exceed 10mm. Application Function: Arming and disarming Alarm triggered Emergency functions When you are at home when you encounter an intruder or other emergency situations, the remote control [flash] is pressed on the key host will ring alarm. Emergency function keys are valid in any mode. Doorbell function,Increase the remote control and alarm