xTool S1 40W Laser Engraver and Cutter Machine with Air Assist & Honeycomb, 23.93" x 15.16" Bed Size, Beginner-Friendly, Laser Engravering Machine for Wood and Metal, Acrylic, etc. - Basic Bundle

My best advice is to watch all the tutorials that they have, which will save you a lot of time and material. Once you set up the machine according to the tutorials, everything works wonderfully. I’ve never had a laser before and this one is indeed a user-friendly, laser, especially if you watch the tutorials otherwise it’s like a blind man walking in dark very happy with this machine very happy. My only regret is that I didn’t buy a 20 W. The pictures below of one of the projects that comes with the machine and these are the most beautiful tea candle holders. I’ve ever seen 26 parts to put together, but what a great result.

Now I’m not gonna lie there was a little bit of frustration and setting up this machine. The manuals are written by someone that has a 200 IQ instead of someone that has a 120 that could break it down and put a few more useful steps in, but you’ll get there between the book instructions and YouTube videos, getting started is a little harder but it’s kind of intuitive once you start playing around you watch a few videos you start learning the terminology the day after I got this set up I started looking at videos started reading the manual, etc. etc. and I am already engraving things, the coaster, and the Balsawood that come with it in the material pack . The software was easy to download from the Internet no problem works very good. Make sure that you keep all your papers together when you unpack your stuff because one paper that looks like it’s nothing has your software activation code on it. You’ll have to call the company if it’s not there or you lose it . I’ve only had this for a day, but it seems to be pretty fantastic so far. You do not have to buy the extra filter extraction case you can vent this out of wall or a window outside your house or garage no need to spend the $700 on the extra vent unless you feel that you want one. I bought one because I didn’t want to vent it outside in my garage. I didn’t want to put a hole in the wall . There is some frustrations putting this together. They do give you extra parts that they don’t tell you what they’re for I guess eventually in time I’ll find out. Do not get it. Rid of extra screws or extra parts. Keep them in a drawer near your machine.

I couldn’t be happier with my new xTool 40W laser cutter/engraver! It has completely exceeded my expectations and has become an invaluable part of my business. So far, I’ve used it to cut out and engrave leather earrings, masks, and create several beautiful wooden signs, all with exceptional precision and detail. The machine’s speed is faster than I anticipated, which has allowed me to complete projects more efficiently and take on more orders than ever before. One of the standout features is how easy it is to use. Whether I’m working on leather, wood, or experimenting with custom art projects, the setup and operation are intuitive and seamless. The accuracy is incredible, consistently producing clean cuts and detailed engravings that I’m proud to showcase in my work. My Xtool S1 has opened up so many creative opportunities for me. From functional items to artistic projects, the possibilities feel endless. If you're looking for a reliable, high-performance tool to take your business or personal projects to the next level, I highly recommend the xTool 40W. It’s worth every penny and more!

It took me a while to set this up but now that I am really getting used to it I like it more and more and would recommend it for use by beginners and more advanced as well. What I really love is how it makes me feel very safe. I would recommend getting things like the If2 and the fire suppression system for piece of mind but these are easy to use and add to the system. I love the things I can do with it and will probably get the 40watt laser head. The only wish I have is for a bigger work area as I want to do big projects. As long as you pay attention to thickness and use the right settings it will do the things you need without creating danger. I do feel people need to pay more attention to material type and make sure they understand the safety and practical lists of using diode lasers but that is more on the user than xTool. It literally has everything you need to get tstarted just take your time and do not skip the safety materials they are there for your benefit.

Easy to set up and easy to use. It’s almost paid for itself already. Definitely going to consider getting other laser modules and I’m glad that’s an option. Also, make sure you have proper ventilation. I smoked myself out the first time I used it. Have been primarily engraving on Gaboon ebony wood and it works well enough. Took a few times trying to determine the settings as Ebony is not within their predetermined material list. My suggestion would be to start slow, at low power, and then increase either of those parameters until you get the desired result.

This works great, just dont waste your money on the riser or conveyer. I would suggest trying a different product or setup if you need to do tumblers. For standard cuts on small sheets 11x11 or 13×11 this works amazing. The quality is on par.

I had a D1 Pro 20w for over two years that was a workhorse . . . until it wasn't. During operation, the laser would stop emitting but the print head would still move OR the print head would stop moving while the laser kept emitting, trying to burn a hole to the earth's core. Decided to upgrade to the S1 40W and I'm loving it. While the dimensions of the unit are clearly indicated, I didn't think it was that big! Unboxing was a breeze (thank you for those Velcro straps - will repurpose the heck outta' those!). The unit is fully enclosed, unlike the D1, and has an exhaust fan. I print in my garage with the door open so I 3D printed an adapter to connect the S1 to my vac which discharges the air up and outside. I'm loving the auto-focus feature where it measures the distance between material and the laser head. Manually having to do it on the D1 was a pain. While I only have the 40w laser head, swapping to the 20w or the IR appears to be very easy. Since I've used the Creative Space software before, the Studio software was easy to figure out. Performed some material tests which came out flawlessly. Had stopped creating for a while since my D1 was down for the count but this S1 has renewed my zeal.

I've used lasers for about 4 years. I gave only had this one for 1 month. So far it is hands down one of the best lasers on the market. I gave nothing but good things to say about it. If your on the fence. You won't find a better laser.

شهادة لله طلبت يوم 8 اكتوبر و كنت متخوف والله من ان المعروض غير حقيقي و نصب لكن وصلني على الموعد يوم 12 اكتوبر و المكينه ومرفقاتها كاملة و الله يبارك لنا و يبارك للتاجر و سعره في الوقت اللي شريت منه ارخص من علي اكسبريس بالف ريال تقريبًا كل شيء مشروح في دليل المستخدم للتركيب و لا تنسون تشيلون جميع الاستيكرات من داخل المكينة قبل تشغيلها، بالنسبة لتطبيقها بسيط جدًا و سهل الاستخدام لكن ينقصه الكثير و ما يدعم اللغة العربية و في الدليل موجود تطبيق آخر اسمه LightBurn مدعوم لكن معقد و بحر و لازم تتعلم من اليوتيوب عليه

High quality , excellent backpacking. Fast deliver. Very good offer.

Item was delivered nicely packaged. Thanks. Happy with the product.

shipping & packing I ordered the S1 10w Basic kit on a Wednesday and it showed up on Saturday. It came in a large box representing it's name. Within the box the S1 machine and all of it's contents were extremely well packaged. The foam fit around the machine like a glove. A couple of very strong velcro straps wrapped the machine which made it very easy to remove from it's shipping box. I have to say this has to be the best shipped item I have ever received. The attention to detail to make sure everything was well packaged and protected is stellar. Safety One of the main reasons I purchased the S1 10w kit was the list of safety features that the S1 has to offer. The machine itself is a Class 1 laser and it proves to be the best option for young prying eyes that are eager to see how it operates. With the laser rated see through cover to the built-in fire suppression system. (additional equipment is needed to be fully functional) The fully enclosed housing is virtually sealed when in operation and that with the help from the built-in exhaust fan to remove any smoke and dust that may occur during operations. The safety is top notch especially the fire alarms, movement alarms and the fact there is an emergency stop button within reach. Furthermore the machine stops in it's tracks if the observation lid is even slightly lifted. Fit & finish Once the S1 was completely unpacked an inspection was done all over the place and I have to say it looked perfect. With the 2 small lockers removed within the work bed the assembly was nearly complete. All that was needed was a protective slip over the module carriage be removed and it was ready to mount the module. with all cables and hoses connected to the well labelled ports it was easy sailing. All that was need was to remove the venting grill to except the provided venting hose. Functions & features Now the fun part, this thing is a beast with a long list of cool functions and features. From auto focusing to real time positioning it makes lasering so much fun. i have to say aside from the 2 point position system the options don't stop there, it also has circle positioning along with multi point for odd shapes. I tell you this may not have a camera but this machine has outdone itself to the point of not needing a camera. Between the XCS software which happens to be free this machine can make creating super fun. Aside from receiving all the needed pieces including cables to hoses, air assist and a honeycomb bed for adding venting for cutting this package also includes a sample pack of substrates. This material pack includes the following: plywood, acrylic, stainless steel tags, leather, glass and etching paper and finally a slate coaster. This material pack gives you enough different types of substrates to actually see how the machine handles different materials. performance One other reason I went with the S1 10w is this 10w diode laser module has a very small laser dot size, this translates to incredible detailed engravings. i can only imagine the projects of engraved portraits this will produce. The honeycomb and the power of the 10w module cuts thin material with ease and having the supplied air assist results in extremely clean cuts as well. final thoughts. Overall this S1 10w basic kit has been nothing but pleasing, it comes with everything you need to go from unpacking to creating within about 15 minutes. With the supplied air assist and honeycomb that comes with the package it is a home run. Xtool has thought of everything, from supplying a material pack to including extra lens protectors and grease for the rails. This packaged kit couldn't be better, it makes creating fun hassle free, leaving more time for creating. The best part of this machine is the lengths they went to provide a safe machine the entire family can enjoy without the fear or worry for young inquiring curious minds. I rate this kit at 10/10 and highly recommend it.

Arrived missing the Distance Sensor which is needed to operate. Laser arrived within 3 days, but communicating with the brand to get the missing part I have waited for 4 days and no word of if anything is even coming.