24V 6A Power Supply Adapter,AC 100-240V to DC 24Volt 6Amp 144W Transformers

I use these for powering 3D printer AMS 2 Pro units so I can dry filament at the same time I print with it without overloading the printer's own power supply. These 6A boxes do provide a lot of power at 24VDC (144W). The 5mm plug post is positive and the shield is negative. You can use them for LED light bars or any equipment requiring less than 6A. That's quite a good amount of power. This particular one runs from USA 120VAC 3 prong sockets that are not removable from the power supply.

I have now bought two of these supplies - both for the same reason. I rescued an Apple Cinema display with the first one. The power supply was dead. Seeing that it only took 24V to power the display, I bought one of these. I now have a nice 30" monitor on my decidedly non-apple PC. That was some time ago. Recently, I had another apple display. This time, no power supply at all. Also did not even know if it worked. Bought a second supply, hooked it up, the display pretended to turn on but would not display an image. Not into tearing it down so to recycle it went. The power supply, however, sits in my desk. Waiting for the day when I need 24 volts at up to 8 amps to power something. If I find I need yet another, I will not hesitate to buy another of these. That it comes with the female jack is a bonus. Makes it even easier to install - no soldering required, and the supply remains removable without having to cut wires!

DO NOT BUY!!! ONLY LASTED 2 MONTHS!!!!! Had this power supply for 2 months and 12 days and it is broken. When you power it up and move the cord it will shut off and turn back on due to loose connection or bad wire. We use these to perform a job and this caused down time. Not happy that I have NO option to even return after 60 days. Not a good product

Works as advertised. Installed to power a shop built system to raise and lower my drill press table. Handles a fairly decent load without an issue for many months of continuous use.

Easily powers all my POE DEVICES.

Works on Apple Cinema Display 30" for about 20 days now . Will be back with an "Updated Review" after some years passed.

Works like a champ. I did a series of led strips and needed additional amps to keep it powered. I’ve had it plugged in for three days now and no issues.

Did not work, plugged it, turned on the device and after running for 1 minute it cut out. No power. Device would restart and it would happen again. Same voltage and .5 amp higher than the original power supply. Should have worked perfectly.

funziona correttamente vedremo durata

Tut was es soll, macht bisher keinerlei Probleme.

Did what it says on the tin. Reliable hasn't let me down in nearly a year

Hat ein etwas kurzes Kabel. Da das Netzkabel fest eingegossen ist lässt sich das auch nicht gegen ein längeres tauschen. Aber hej. Für 17,- tuts was es soll. Macht nen soliden Eindruck.

Works Perfect for Bambu AMS 2 Pro at a fraction of the cost.