2X 6.1 inch Emergency Strobe Lights Red White 12 LED Hazard Warning Flashing Safety Front/Rear Windshield Deck Split Lights Grille for Volunteer Firefighter Vehicles POV Trucks

Good, bright leds even through a tinted back window. Good construction. Main body of units are extruded aluminum with plastic endcaps screwed into place. Many mounting options and hardware. Back of each unit has a slot and came with 2 bolts in the slot for mounting on a light bar or surface mounting If not using, these can be removed by taking off an end of the unit and sliding the bolts out. Ends of each light bar also have a set of mounting holes for using the included bracket and are slotted to allow adjustment to the light bar for angles surfaces. Included brackets include 4 oversized suction cups to be used for glass mounting. Suction cups are a bit big and do take up a lot of room, but do not interfere with the lights. Units are plug and play and come with plenty of cord to reach where needed. Cords also have a built in disconnect, so additional length of wire could be added. Great price for the quality and look of the lights Would buy again

Really well made and the suction cups work well. I use them on the back side windows of my ford explorer and they go through the tint well.

Excellent product came with everything listed setting it up was easy and actually adhesrs to my back window of my truck. The cords are long enough to reach my cigarette lighter. It has interchangeable patterns and stays on the last one you selected it's small and compact enough to not interfere with my driving. The lights are bright enough as well. Over all im happy with this purchase

Very bright and works great.

UPDATE 5/26- I just got a set of plain WHITE and mounted to my side grab bars, just to even out the insanity. The video shows the WHITE on the grab bars between the doors, and the PURPLE/WHITE below the rocker panels which cast a beam on the ground. This review is only for the 2x 6.1 inch Emergency Strobe Lights Purple/White. (And now also WHITE). I got (4) sets of these because they match my show truck's color theme, giving an affordable light show to coincide with my underglows, ring lights, interior lights and sound system. I like how they are lightweight, have easy cigarette lighter power functions, and have 2 different mounting options. Suction cup placement for the interior, and affixed bolts for the exterior. If you're looking for an inexpensive novelty light show, go for it. Works well for my car shows and mall crawl Deejaying 😆👍

I do food delivery as a side gig, often at night. I got two of these lights to place on either end of my vehicle for the times that I am stopped on the side of a busy street, as the area I deliver in is notorious for drivers that don't like following traffic laws closely. These lights are bright enough to alert other drivers of my presence and have helped avoid collisions! Pros- the lights are incredibly easy to install. You just press the suction cups to the inside of your window and plug in to your cigarette lighter plug. These will also work with those adapters that allow you more plugs. Cons- Personally, the wires hanging in my car are unsightly to me, but if you're a genius at hiding wires inside the car, then this won't be a problem. Occasionally a suction cup or two will loosen and make the light lopsided, but you just have to press it against the glass again.

The mounting is not great. I use this for my rear windshield. They are constantly falling off. The brightness and visibility are great.

Got a job working with my local police department. We're allowed to use our own vehicles when doing Auxiliary work. The lights are great with different modes. Just wish the suction was a little better.

They're bright. If you don't have tint on the window it will be bright enough to have glare even during daylight! Controller is built in and works. It's the standard pre-set only patterns which means you can't control it by a separate controller without sacrificing some brightness. > I tested leaving these on solid-mode and then flashing with an auxiliary controller, but it is not as bright as the build in flashing. This way would also lose the split-flashing functionality where each side can display two-flashes (left and right side of the bar). You will likely want to purchase an LED 4-pin extension cable if you are mounting these on opposite sides of a vehicle, as the built in cable is rather short and both need to be connected together to have both function (one is a master one is a slave).

Excelente iluminación y Funciones cumple con su función, el cable de corriente es largo yo tengo una pickup doble cabina y quedó perfecto 💯. Muy recomendable para que te vean en rutas o simplemente para alertar de algo.

La barras están muy bien ases sus funciones ta cual pero en mi casa me salieron fallan asta el momento estoy intentando regresarla por que me salieron falladas

Very bright. As required.

Easy installation and work well. Lights can been seen from quite a distance.