ROADOM 10.1" Touchscreen Monitor, 1024x600 IPS Raspberry Pi Screen, HDMI | 5-Point Touch, Dual Speakers, Plug & Play, Pi 5/4/3/Zero, Home Assistant, Gaming, PC Sub-Monitor, 3 Display Modes, with Case

UPDATE: The only down side I found is that it is very tricky to access the MicroSD card when the Pi is mounted on; this can be easily solved with standoffs that lifts the Pi up a little which gives more room for your fingers to pull and insert the card. In the picture I used 11mm brass standoffs. I also put some tape around the edge of the MicroSD card so it could be easily pulled out. ORIGINAL REVIEW: There are 2 versions of this monitor: a 7" and this one which is 10.1". On the 7" version the ports are located on the side, where on this version they're more inward because, well - it is physically bigger. Because of this, the mounted Raspberry Pi on the back along with all the cables are less visible from the front. For this reason and because I wanted something small and still big enough to read from, I decided to go with this 10.1 version and I'm very pleased with it. The box of this monitor is quite rich with stuff - you won't need to go and buy any cable to connect it to your Pi as it comes with all the cables you'd need - it also comes with a screwdriver and screws for mounting your Pi. I didn't even have to use its power adapter as I already have a power adapter for my Pi, and I just connected the included short USB cable from my Pi to the monitor's 5V+TOUCH port to power it up, which also enables the touch. The only thing I did added which wasn't included in the box is a convenient ON / OFF power switch cable, as the Pi 4 that I'm using doesn't have a power switch. The idea of screw mounts specifically for the Raspberry Pi on the back of the monitor is what makes this monitor a very good product - I began a Raspberry Pi course and had trouble trying to keep my Pi and all the cables organized on my desk, which every time turned into a mess when I touched one of the cables. No more with this solution - I mounted the Pi on its back, connected all the included cables and forgot that it's there. It's like having an all-in-one computer, just smaller. :) My desk is now cleaner, and every time I want to access the Pi I just flip the display to its back, do whatever I need and flip it back to the front. The built quality seems and feels very good. It's plastic all around but it seems to be built to last. The tension of the stand is quite firm as well and very steady, and the touch feature is very responsive with no delay or lag. When I got it, I almost forgot that it has internal speakers. I realized that when I went into its menu settings and suddenly saw "Volume". These built-in speakers are very nice thing to have for occasional use, but don't expect too much of them; I have a simple mounted stereo speakers soundbar on my main monitor so I'm no hardcore music listener by any mean, and so to me these built-in speakers are quite good for this small form factor - and it doesn't take any additional space on the desk. To access the menu you use the buttons on the right hand side: there's an ON/OFF button, a Menu button, an Up button which is also a shortcut to access the Brightness, a Down button which is also a shortcut to access the Volume, and an Exit button. The screen quality is very sharp, though only when used on its proper native resolution, which is 1024x600 (if you try different resolutions the image won't be as sharp, but it's a common behavior with all LCD monitors). Though, on boot, I'm not sure why the on-screen menu shows 1280x720, as this is beyond what this monitor is capable of - you can set it to that resolution or even to Full HD from the OS side too, but again, the image won't be as sharp, so make sure you keep it on 1024x600. The menu of this monitor is also quite rich with settings that I didn't expect to find on this small form factor, such as color temperature presets, energy saving and also a low blue light setting which makes the screen appearance to a warmer one, like how your smartphone nowadays does - it doesn’t do it automatically though, but I really appreciate this feature, as I'm quite sensitive to blue lights. Beside of this, you have the traditional 4:3 and 16:9 aspect ratio toggle settings so this monitor could be used for playing retro games at the correct aspect ratio as well. Attached some pictures that I took from the unboxing process for your impression (I blurred some areas that reflected my personal environment). Hope you'd find this review helpful.

So far I love this thing. I had a bad experience buying a screen from Aliexpress that said it was made for the Pi, but not only could I not power it through the Pi, but even normal 5v power supplies I have couldn't run it consistently. I don't have any issues with this one -- it powers easily from the Pi (I'm using the GPIO pins) and so far just works. The touch screen also immediately worked. Only thing I had to troubleshoot was I couldn't get audio, but it turned out I just had to set the Pi audio to HDMI. The size is good for me because I have bad eyesight but am trying to make a compact computer for fun. It's amazing all the cords it comes with. I've never bought something that was this complete. I mounted the Pi to the back and it works well. The cords (especially the GPIO cord) are pretty short if you're not going to mount the Pi, but it can still work. And you should be able to hook it up w/out the pins if it's too short I believe (I haven't tried it.) So far, couldn't be happier

I'm using it with a pi 4: 1. It comes with a ton of cables and screws, everything you could possibly need. And then more. 2. The included manual is actually good for once. It has very clear pictures explaining how to hook things up. 3. It assembles really quickly and solidly, unlike some others that seem kind of loose 4. It just works without any configuration or tweaking of drivers. 5. It's fairly low-res, but fine if you're using it to display something that will be viewed from at least a few feet away. 6. The weather at the bottom of the second picture is scrolling; that's why it looks a little less-sharp.

Worked great on my Pi 4 and 5. Display is bright and the range of viewing angles are good. The touch works well and is responsive. Use it for klipper control. I wish the USB C port could display video but it can’t. You will need a min of 2 cables, HDMI, and then USB C for touch and power.

We bought 2 of these monitors, mainly for the low price. We wanted a low priced, small monitor to fit under our main computer monitors for use to have company cameras in view without taking space on our main screens. We got one screen up and running but then it just shut off and quit within 15 minutes. Our IT department tried everything to get it to work again, googled the problems and attempted all the possible fixes. The 2nd monitor installed as it should and worked great for our purpose. I checked the return policy on the listing on Amazon and it was 30 days and we were over that by the time we did the initial install, it broke, we attempted all the fixes. I thought we were just out of luck, which it's a lower priced item so I was frustrated but not really surprised - you get what you pay for, right?!?! Wrong!!!! While I was packing up the monitor to get rid of it I noticed a small card in the box saying it had a 12 month guarantee. I thought, what the heck, isn't going to hurt to contact them and see what happens. My expectations were low, I assumed there would be some reason they wouldn't replace the item. But - they DID!!! They sent a replacement quickly (like lightening quick) once I told them the problem and also sent a video of what the monitor was doing - or not doing in this case! I provided them with the video on 5/2/2024 and I had a new monitor in hand by 5/3!! The person I dealt with via email was information, courteous and professional. They FAR EXCEEDED my expectations. I would not hesitate to buy from this seller again. The monitor itself is great for our purposes. Actually it probably has more features than we need.

If you're like me and you've seen these smaller additional monitors people are using at their desks for anything from system statistics to a standalone for one application, you've considered pulling the trigger many times, but just couldn't justify the expense. Well, now's the time for a lot of reasons. Primarily, this is also a feature rich USB hub as well. I know there's a feature utilizing a Raspberry Pi as well, but I've yet to connect mine to take advantage of any of that. I have one standing by though. For right now, though, this is my USB hub with Claude running on it awaiting my next queries and providing me with AI info as needed. Pretty slick device here. Great price. Hi-Def image. Simple to set up. What more could you want?

Update: found 10mm M2.5 screws to attach official case - from kit on here (VGBUY). Also 4" USB A to USB c cables. (Umefly) Used official RPi cooler but had to use Geekworm X1003 NVMe SSD M.2 adapter (as yet untested) to fit in the official case with the cooler. Some parts from Vilros - black official case, black Power Supply.... looks great! Works well with the Raspberry Pi 4 or 5 BUT trying to mount the Pi with hats in a case (not willing to hang my $200+ parts out in the wind) - RPi official RPi 5 case will work - but is very difficult, and won't work with the supplied screws . I finally ordered some threaded M2.5 brass rod to be cut to length (yet TBD but 16mm length looks about right, 6mm in case, 5mm on each side for attachment) to make headless studs for mounting. The black RPi official case looks good for it as well. The compact RPi NVMe SSD adapter with the official fan cooler also should work. Let you know when I get it assembled... Interestingly, I think the official RPi 4 case would work if holes were drilled in it. I may try that too as I have a 4 hooked up to it right now, although in a case with a fan.

I got this for my son for Christmas. It’s now the middle of January and it’s not only broke but quite possibly could have been a fire hazard. My husband is an electrician so things are always plugged and wired perfectly. From the get go it’s made a weird noise even when it running. Today however my son was in his room on his computer and yelled. It had shut off and was smoking. (We didn’t actually see the smoke by the time we got there but you could definitely smell it!) now I purchased this back in October for him for Christmas (we like to spread out our Christmas shopping for money sake) and now it’s not returnable!

I used this to put Lineage OS on a Raspberry Pi 4 to make a bartop interface to my ai server so I could generate cocktail mixing instructions on the fly. I have two issues with it. The first is the resolution is lower than I would like. It's advertised as "HD" but the actual resolution is below 720p at 1024x600. To be fair that is also clearly stated but I missed that part. Secondly, the base is quite wobbly, making it difficult to use an onscreen keyboard without the whole unit shaking. You could probably fix this by securing the base with some double-sided adhesive tape or something like that. I haven't tried yet. Other than that it works as intended. They have the right idea, but the execution needs improvement imo.

Quality and accessories are good.. slightly wobly when the pi goes on it while touching.. and the touch screen is bad.. i touch one side of the keyboard and it starts touching random other keys on the same line.. tried this on both screens i bought on 2 different Pi’s as well.. otherwise good for what i intended buying it for