NAACOO Laminate Flooring Tools, LVP Installation Kit, Professional Vinyl Flooring Tools - Tapping Block with Handle, 10” Contour Gauge, Pull Bar, 2 in 1 Spacers, Double-Faced Mallet.

This installation kit is worth it! Two main factors is that the spacers are way better than the shim style and the fiberglass handle mallet is tough. The cheap kits have the metal handle that will break off. This is a solid one for all the tapping and hammering you have to do for an LVP install. The tapping block works well too. Two sided for hitting on the end of the panel and notch out on the other side for tapping the long side without damaging the lip. Great set for a DIY job. Great value for the cost.

This is a pretty solid kit especially for the price. Did about 2,000 square feet of LVP. The bar did eventually bend a bit after lots of use but it was still usable and did the job even then.

Made with good Durable sturdy materials

Oh boy, gather 'round, my fellow DIY enthusiasts! I recently embarked on a journey to install laminate flooring in my home, armed with the NAACOO Laminate Flooring Tools kit. Let me tell you, it was a hilarious adventure that deserves a review! First up, we have the "Double-Faced Mallet." Now, I don't know about you, but I've had my fair share of mallet mishaps in the past. This bad boy, though, is like the Thor's hammer of laminate flooring! The handle is so well fused to the head that I suspect it might be made of Vibranium. I can confirm - not a single issue with the head falling off or the handle bending. Say goodbye to "accidental" holes in your walls! Next, we have the "Heavy Pull Bar." Forget the flimsy pull bars of yesteryears, this one's got the quenching treatment! It's made from premium steel that's apparently better than A3 steel. I don't know who A3 is, but he's got nothing on this pull bar! Plus, it's thicker than the average pull bar, and it comes with soft pads. My floor has never felt so loved and scratch-free. Now, let's talk about the "2 in 1 Flooring Spacers." These are like the superheroes of spacers, with two sizes to choose from. And the best part? They don't tip over and get stuck like those flimsy spacers in other kits. These spacers are so stable; you'd think they were auditioning for Cirque du Soleil. The "Solid Tapping Block with Handle" is next on our comedy tour. Made from unyielding NYLON, this block is the Chuck Norris of tapping blocks. It's sturdy, durable, and at approximately 7 x 2-3/4 x 3/4 inches, it's the perfect size to handle. You can control the direction and prevent hurting your hand while tapping away your flooring woes. But wait, there's more! The NAACOO kit is different from the others, and it's not just a marketing gimmick. With this kit, you'll be 30% more efficient in your laminate flooring endeavors. It's like having the secret sauce of DIY in your hands. You'll be installing your flooring so conveniently and easily that you'll wonder if you're a professional flooring magician. So, my friends, if you want to turn your DIY flooring project into a comedy show filled with triumphant moments, get yourself the NAACOO Laminate Flooring Tools kit. It's a symphony of DIY frustration prevention, and it might just turn you into the Bob Ross of home improvement. Happy flooring! 🛠️🤣

I picked up this installation kit thinking it would just save me a couple trips to the hardware store, but it actually made the whole flooring project way smoother than expected. Everything you need is in the box and it doesn’t feel like cheap throwaway tools either. The tapping block held up great and didn’t crack or chip, even after a lot of use. The pull bar is solid and helped get those last rows nice and tight without damaging the planks. The spacers were consistent and stayed in place, which made keeping the expansion gap easy instead of constantly readjusting. The mallet has a good weight to it and feels comfortable in hand, not one of those flimsy ones that fall apart halfway through the job. Installed LVP in a bedroom and hallway and honestly this kit paid for itself in saved time and frustration. If you're doing vinyl plank flooring, this is one of those small purchases that makes a big difference. Would definitely buy again.

Was quoted $5,000 for a laminate floor and installation. Bought this kit and a Laminate floor cutter and installed my floor for under 1800.00 using a quality laminate. Very easy to use and was exactly what I needed to do a quality job for less than half of what I was quoted. Worked out so well with these tools I will tackle the next room.

Good value and indispensable for fitting lvp flooring. Particularly liked the double sided spacers

Was working on remodeling a 114sqft room into an office. Tore up carpet to place in wood look vinyl flooring and needed these tools to install the click together flooring. Everything arrived quickly and it all looked good. Got to work right away with the installing. The spacers were great, no issues with the whatsoever. Was able to put them in place, tap flooring into place, then wiggle them out with no issue. The tapping block was good. It lined up nicely, tapped smoothly and the handle didn't loosen or give any issue. The material of the block is semi-soft, as I began to see it chipping and cutting away slightly by the end of my job. Has a nice lip for the widest part of it and a narrow edge, which made it easy to ensure proper tapping all around the flooring. The metal grip bar was perfect. Has pads to not scratch the flooring. Was able to fit in the space around edges, and gripped the flooring without issue to provide a tight seal. Didn't have any issues with it bending or warping throughout the job. The hammer was frustrating! This was my biggest gripe about the set. I was working with these tools fairly gently and not even a quarter of the way into the project, the hammer head popped off... It appears to be glued in rather cheap, so throughout the job, I had to slap the hammer head back into place after every other row of vinyl flooring. Other than the head falling off, the hammer did it's job without damaging anything. Overall, the box set is great for the cost of it. It's inexpensive, quick to arrive, and gets the job done for small tasks. If you're planning to do a larger space or expect to use it for multiple projects, then I would suggest looking for something a bit higher end. If you just need a small project done at minimal cost, then this will get it done.

Tools were very handy in laying thE LVP flooring. Contained all necessary tools.

It's worked OK for the first room of hybrid flooring but I'll upgrade the tapping block before I go further. The spacers are a good design. The hammer is too small and the pull bar is just adequate. I probably wouldn't buy this kit again if I had more than a single room to do. It works, but it isn't great.

I like these shims. Versatile

Well made set of tools to lay click style flooring.

best investment