Prestantious Downspout Rainwater Diverter Fit for 3"x4" and 2"x3" Downspout

The diverter works as advertised. It is relatively easy to install: you have remove a section of the downspout to install the two pieces. Once the section of downspout is removed, installation of the diverter and hose is easy. Great product.

This was super easy to install. Measurements were clear and true. The downspout works very well and happy with purchase.

Worked well in my application as seen in the photos. I would have gladly given it five stars, but there’s definitely room for some improvement. Although the device is well-made, sturdy, easy to install, and looks great. The supplied hose does not match the quality of the diverter itself, it comes collapsed and does not want to stay open, which restricts water flow, and also got sticky after just the first couple of days in the sun. I ended up replacing the supplied hose with one purchased separately. I also added clamps, which could easily have been included in the kit. I think it was a good purchase and seemed to be the best reasonably priced one available, I just think they can make a few adjustments to improve the overall package for the consumer.

This rainwater diverter has been so effective that we ended up buying two! It was easy to install and works exactly as intended. After a good rain, we were amazed at how much water it collected—in just one day, we filled a 275-gallon IBC tote for use in our garden. It’s been a fantastic addition to our homestead and a great way to make use of free rainwater. Highly recommend!

Works very good and retracts nicely. Very happy with this product!

I needed to switch the knob to the backside of the diverter to allow me to have the outlet of the rainwater to be on the left side of the diverter as opposed to the right side that comes standard. It’s easy to switch, just unscrew and take off the knob. However the holes on the backside of the diverter that allows the knob to click in place are too deep or not properly aligned because it’s almost impossible to rotate the knob to change the amount of water passing through the diverter without taking the whole thing apart. I got it to work, but I have to take the diverter off of my gutters any time I want to move the lever to allow more or less water to pass through. Not terrible but it defeats the purpose of having the adjustable knob in the first place. That being said, it works and was fairly easy to install; just don’t rely on the adjustable knob and know its limitations before purchasing.

This diverter is exactly what I needed to set up my rain barrel system. Super easy to install. Used a sawzall to cut out the section of downspout, inserted as shown in the diagram and easy instructions, attached the hose and ran it to the rain barrel. I just cut off the excess hose length, and based on other reviews, I did zip tie it to the diverter. We’ve had two rains since then and it’s working perfectly.

I installed this in late August. 50 gal rain barrel and 3in downspout. Cutting the downspout was the hardest part. I used a hacksaw and removed the downspout for an easier cut. Diverter fit well. My rain barrel is to the left of the downspout so I had to switch the diverter control. I had trouble getting it to go up and down. It sticks and I have to push it from inside the diverter to get it all the way down. I believe another reviewer had the same problem. It worked fine from the factory but once I changed the direction to the left it binds. It still works but I will have to open it up to close it for the winter and again in the summer. Still, I am happy with the purchase.