Downspout Diverter, Rainwater Diverter Fits for 3"x4" Oversize Downspout and 2"x3" Downspout, Rainwater Collection System with Adjustable Valve, Diverts Water into Rain Barrel, 4ft. Hose

This simple diverter works great ! Easy to switch the outlet from right to left, as I did, and I used the 2x3 adapter to fill the space around the bottom of the diverter. I have the larger 3x4 downspouts. This made a nice, clean installation. I used a piece of fine screen above the diverter to filter out bugs and leaves. Made the top part so that it will slide up to allow cleaning or replacement of the screen and also the diverter. My only complaint is the hose. It never straightened out completely from being folded up in the box. Will probably replace that later. My 2-55 gal barrels filled completely from a 1" rain.

This diverter works well, fits well in down spout, I use these with my rain barrel’s often and have had no problems. Good quality.

Worked well in my application as seen in the photos. I would have gladly given it five stars, but there’s definitely room for some improvement. Although the device is well-made, sturdy, easy to install, and looks great. The supplied hose does not match the quality of the diverter itself, it comes collapsed and does not want to stay open, which restricts water flow, and also got sticky after just the first couple of days in the sun. I ended up replacing the supplied hose with one purchased separately. I also added clamps, which could easily have been included in the kit. I think it was a good purchase and seemed to be the best reasonably priced one available, I just think they can make a few adjustments to improve the overall package for the consumer.

This downspout diverter works exactly as advertised! It fit my standard gutter downspout perfectly and was super easy to install. Now I can easily direct rainwater into my barrels without leaks or mess, and flip it back to normal when the barrels are full. The material feels durable and weather-resistant, so I’m confident it will hold up through all seasons. Such a simple but smart way to make use of rainwater and keep my garden watered for free! Highly recommend for anyone looking to collect rainwater efficiently.

We liked the option to limit the flow of water with the turn of the lever, installation was fairly easy and simple, we had to modify the drain tube to fit our drum due to hole diameter size and screen. Again no problems with tube modification, system appears to be working as designed, we have just not had any torrential rain to really test it. Only recommendation I think is needed, is a screen and hole grommet attachment to fit drain tube in to the barrel or drum!

I want to acknowledge that I don’t have a bracket holding the top part of my downspout in place and that is part of my problem. I like the construction and the materials used to make this diverter. I believe that they tried to design it to work on different size downspouts. It has a top piece for 2x3” downspout that is discarded for a 3x4” downspout. I think it would have been handy if it was designed to fill in the bottom gap for a 3x4” downspout. The bottom piece leaves a gap when going into a 3x4” downspout (see photo) this adds to the instability of the whole unit. The tubing is flexible and reinforced, which is great but it comes collapsed and folded around itself in the box. I tried to put a stick inside it and let it sit that way for a few days to see if it would relax but it would not. I tied to the tubing until I get my rain barrel installed. It has not rained yet so I’ll need to update this review after that.

Works well for my application. Helped me fill a 275 gallon tote in 4-5 days of decent rain. Had to strap it above and below the diverter. Keep in mind that if your downspout is flush with your wall, the points where the gutter insert into the diverter do NOT.

Received yesterday & installed today. I'll have to wait for rain to give a full review, but, it seems to be well built & sturdy. I had to change the direction of the spout from right to left, which was very simple. Installation was not difficult, although cutting the downspout was tricky - would have been much easier if I'd removed the downspout from the house first, but I didn't want to mess with that, so I used a combination of hand saws & tin snips - certainly not a professional job, but I got it done. As others have mentioned, it would be great if the kit included a piece to cover the exposed cut on the lower part of the downspout. I reconfigured the extra ring from the top, the piece designed to be discarded if your downspouts are the larger diameter - which mine are - I cut away some of the extra plastic on the back side so that the piece fit into & over the cut edge of the lower downspout, covering up any sharp edges on my less than perfect cut - see close up in my first picture. It looks much better than it did without it, and I believe aids in making the whole thing more stable.