NZXT H6 Flow | CC-H61FB-01 | Compact Dual-Chamber Mid-Tower Airflow Case | Panoramic Glass Panels | High-Performance Airflow Panels | Includes 3 x 120mm Fans | Cable Management | Black

Had a gargantuan NZXT Phantom for several years, and had been seeing this style of case explode in popularity over the last several months. The H6 Flow kinda came out of nowhere (to me, at least), just as I was about to start ordering upgrades so I could actually run some of the most recent pc releases. This case is a far more manageable size, and as a long time fan of NZXT cases, this new offering does not disappoint. Obvious comparisons to other dual chamber/aquarium style cases aside, the H6 boasts a functional clipped front corner that comes stock with 3x120mm intake fans. At this angle, the fans blow air directly towards your GPU, as well as your CPU's air cooler tower, if you're using one. The biggest objective con in this case is that the bottom fan mounts, which are recessed to allow for a clean and streamlined installation, are restricted to 140mm fans. As seen in my attached picture, 120mm fans will just kinda... float there, but since the RGB is so extensive on mine, I almost consider it a feature. But for the sake of maximum airflow and making sure the case is a positive air pressure environment, it is something I'll address at a later date. One other important thing to bear in mind is the available depth for tower coolers. I'm not sure if it's obvious from the picture, but the leading fan is actually contacting the glass side panel. It literally could not fit any tighter. That being said, I'd either recommend opting for water cooling on the CPU, or having low profile RAM sticks for air cooling, but that's mostly dependent on how your MOBO is laid out. :P Overall, the H6 Flow was fun to build in and looks spectacular once everything's up and running. Build quality is sturdy, along with good options for cable management tucked behind the motherboard tray, and all at a very competitive, budget-friendly price.

I am going to start this with I have the H9. I freaking love that case. Then I seen the H6 was the little version of the H9. I scooped it up. My buddy needed a case so I said hey man I got this NZXT H6 sitting here. So we build his PC in the H6. It is a kick as... Awesome case man. It is open the wire management is just stupid easy. His other build is in the H7. He said he likes the H6 better. Yeah it is smaller than the H9 but there is so much room in there. Then glass panels ar pretty tough. Not saying ya can bounce em around. My dog knocked the side glass over. It hit a piece of his old case. I thought for sure it was scratched or broke. Not nothing. Whew lol. Look if you are shopping around for a case. Here is the real real. The H6 is an airflow beast. There is only 2 SSD mounts. There is one HHD mount as well. It will hold a beefy PSU. The Radeon RX7700XT fits in there no problem. Along with the CPU cooler on the top. It has 3 fans installed. Ya can run a 3 fan cooler on top. 2 140mm fans on the bottom and then one out the back. Go scoop it up man.

In the ever-evolving world of PC building, finding the perfect balance between performance, aesthetics, and functionality is crucial. As an avid enthusiast, I recently had the pleasure of upgrading my PC build with the NZXT H6 Flow case, and I must say, it has exceeded my expectations in every aspect. In this comprehensive review, I'll delve into the features, performance, and overall experience of using this remarkable case. Design and Aesthetics: The NZXT H6 Flow boasts a sleek and modern design that immediately catches the eye. Its minimalist exterior with clean lines and subtle accents exudes sophistication, making it a stunning addition to any gaming setup or workstation. The tinted tempered glass side panel provides a clear view of the internal components while adding a touch of elegance to the overall aesthetic. Additionally, the integrated cable management system ensures a clean and clutter-free interior, enhancing the visual appeal of the build. Airflow and Cooling Performance: One of the standout features of the NZXT H6 Flow is its innovative airflow design. The case features optimized airflow channels and ample room for multiple fans and radiators, ensuring efficient cooling for even the most demanding components. During extensive gaming sessions and CPU-intensive tasks, I noticed a significant improvement in temperature management compared to my previous case. The H6 Flow kept my components cool and stable, allowing for uninterrupted performance without any thermal throttling issues. Functionality and Build Quality: The NZXT H6 Flow excels in terms of functionality and build quality. The spacious interior provides ample room for large components, making installation a breeze. The tool-less design simplifies the building and upgrading process, saving time and frustration. I particularly appreciated the attention to detail in the design, such as the easily removable dust filters and the strategically placed cable routing options. Every aspect of the case feels well-engineered and thoughtfully designed, contributing to a seamless building experience. Customization and Expansion Options: One of the key advantages of the NZXT H6 Flow is its flexibility for customization and expansion. The case offers plenty of room for additional fans, RGB lighting, and custom water-cooling loops, allowing users to personalize their builds according to their preferences. Whether you're a hardcore gamer looking to add extra cooling power or a content creator aiming for a visually striking setup, the H6 Flow provides the versatility to accommodate various customization options. Conclusion: In conclusion, the NZXT H6 Flow is a standout choice for PC builders and enthusiasts seeking the perfect blend of performance, aesthetics, and functionality. Its innovative airflow design, sleek aesthetics, user-friendly features, and flexibility for customization make it a top contender in the competitive market of PC cases. Whether you're building a gaming rig or a workstation, the H6 Flow offers everything you need to elevate your PC build to the next level. With its exceptional performance and stunning design, the NZXT H6 Flow has earned its place as a premium choice for discerning enthusiasts.

Summary: H6 is a perfect middle ground case between the historically cramped square cases and the newly emerging massive fish tank cases. Cooling performance is great and the price makes it a perfect balance of aesthetics, awesome performance, and lower price. Build quality is the standard amazing quality expected from NZXT cases. Pros - Super easy to build in! Tons of space for cable routing and management, especially in the back and at the top of the mobo where it’s usually a pain. Plenty of space for extra PSU cable length from cable kits or non-modular PSUs. - All panels pop off and on very easily. Incredibly easy to work with. - Case looks even better in person! The full glass gives a beautiful view of components. - Going from a glass front H510, I thought the full mesh would make my system much louder, but it’s just as quiet. That’s largely dependent on fans and their RPMs, but my same build in this case is quieter, perhaps from the angled fans being pointed away from where I’m sitting. - The recessed fan slots in the bottom of the case both look interesting and also seem to work exceptionally well. I’m seeing 7 degree (C) GPU temp reduction under load compared to my prior H510, but there are also multiple more fan slots on this case. Whether it’s the lower 140 slots or the front, I’m stoked to see that much of a GPU temp reduction given how intense games push GPU these days. - My favorite little detail is a small hook between the back exhaust fan and the top of the case. This allows you to route that cable safely so wire interference is not a concern. - I thought this case was going to be a lot wider of a footprint than it actually is. It is wider than my prior H510 due to the PSU being behind the mobo instead of beneath it, but it’s totally worth the extra space given the cooling performance and it doesn’t feel or look too big like some of the larger fish tanks cases are. Cons - Honestly, I haven’t found a true con yet. Biggest con I can think of is that the included fans come with a pre installed splitter. That splitter is too short to run to a mobo header, but it’s plenty of length if you have a Kraken or other NZXT RGB or Fan controller.

What I look for in a AAA case are: aesthetics, accessibility, and airflow. Aesthetically, this is a nice fish tank to put your components into so that you can admire your handiwork. I didn't get the RGB version because I don't throw a lot of disco parties, so this is just a good, no-nonsense build that still looks pleasingly modern. I just looks good, as good as anything out there, and it would be a good home for those fancy RGB setups if you're into that. Accessibility of this case is also great. It comes apart with a simple thumbscrew for the front glass and back panel, making it very easy to get into and work in, and the top pops off easily if you need to get in from there. The dual chamber design makes it very easy to manage cables, even for someone like me who's generally pretty terrible at it; it has included velcro straps in the back chamber to help keep things in control, too. It's a very easy case to work in without scraping off your knuckles or struggling with finding enough room to do anything. The only downside I'd mention is the drive mount chassis in the rear chamber. It has a thumbscrew and just pops off easily to put it in and out of the case, but it seems designed for a single 3.5" mechanical drive and/or two 2.5" SSD's with typical screws. It's kind of old-school, no toolless design there or anything fancy, and almost seems out of place on this case. It wasn't hard to work with, and it works fine for what it is, but with all that room back there it feels like a more modern tool-free SSD-centric design would be more fitting to the systems most people will build in this thing. If you're only using M.2 drives, just remove it entirely. Airflow would be last, and it's kind of amazing. I did add two 140mm fans to the bottom of the case, and a 120mm exhaust fan to the back, with a 280mm AIO on the top of the case. It's relatively quiet and moves so much air that I can feel the difference at my desk when my system is turned on. You shouldn't have any trouble keeping your system cool in this case, but I definitely would recommend at least the two 140mm fans on the bottom at the very least and I'd probably use another two on the top if you're not attaching a radiator up there. I think you could get by without the 120mm rear exhaust, but the case seems designed to funnel air through that way and installing one is cheap and extra cooling never hurts. Overall, it's one the best cases I've ever owned. It looks great, the price isn't bad, it's really easy to work in and isn't ungodly heavy, and cable management is about as easy as you could hope for.

The NZXT H6 Flow is an impressive case that strikes a perfect balance between aesthetics, performance, and build quality. Although it's classified as a mid-tower, it has a spacious dual-chamber layout that offers excellent separation of components, making cable management easy and airflow highly efficient. One of the standout features is its airflow design. It doesn’t have a traditional front mesh panel — instead, it uses angled intakes with up to 9 fan mounting options, allowing for a wide range of configurations. The included front fans are angled in a way that provides direct airflow to the GPU and motherboard, keeping temperatures well under control even during heavy loads. The build quality is excellent, and the case really shines when it comes to showcasing your components. The dual tempered glass panels provide a stunning, unobstructed view of your hardware, which makes it a great option if you like to highlight your RGB setup or just want a clean, modern look. Despite not being particularly compact, the internal layout is smart and builder-friendly. Whether you're doing a high-performance gaming build or a clean workstation setup, everything fits well and looks great when it's done. Highly recommended if you’re looking for a high-airflow case that delivers both in looks and functionality. NZXT really nailed it with the H6 Flow.

Like this case a lot! (non RGB version ) Great to build in, easy cable management. Thoughtful and innovative design. A pleasure to build in. Superb tool free panel connections. Unique location for PSU works great with ATX 3 PSUs that have typical connection locations opposite of power and switch. Would be awkward with Corsair Shift series with side located cable connections. Overall an excellent case with only two minor negatives: 1. Comes with three OK front case fans that are 3 pin and not PWM so I replaced them with Noctua PWM fans. (Silly since NZXT does not even sell 3pin fans separately.). 2. The nice Velcro cable ties provided in the case are a bit short. Even considering these two small cons, a great case overall. Very good fit and finish. Would absolutely choose it again.

I've been using NZXT cases for decades, so I know my way around a good and bad case, and when I say this is hands down the best designed NZXT case I've ever built out of, I'm not giving it that title lightly. Pros: Excellent airflow with easily removable air filters 360mm AIO water cooling capable (custom water cooling too if you get creative) Enough intake fans to keep high-end gaming rigs nice and chilly 2 sided glass makes any build inside it look amazing Very good options for cable routing One screw removal for front glass panel Vertical GPU mount capable Cons: I really would've liked to see some more front I/O but that's something NZXT has never been great with. If you care about having accessible ports, look for other cases. The USB-C port is also type 3.1 so if you don't have a modern motherboard you won't be able to use some of the ports. Bloody massive! If you plan on using this to make a desk PC like I did, be prepared to lose about 1-2 feet of your desk! And make sure it's nice and strong because once this PC case is built out as a finished PC it's not light either. Honestly, I'm just surprised they are able to sell such a nice case for so cheap. Buy this while they are still making them!

La caja de amazon llego hecha una porqueria, no se si es culpa de seur o de los de amazon. En cuanto a la caja es un 10 en absolutamente todo, me ha encantado. El hecho de que los ventiladores esten de manera diagonal hace que el aire fresco vaya directamente hacia la grafica, cpu y placa madre en general, refrescando de mejor manera los componentes, cosa que no es igual con los ventiladores laterales que solo empujan aire hacia el cristal. La caja tiene un espacio tremendo para los cables y puedes tener mas espacio todavia si retiras el soporte para el ssd. Tiene huecos por toda la caja para el manejo de cables y que queden todos los cables escondidos, dando un aspecto mas limpio en la zona de los componentes. Además tiene unas gomillas en la parte de abajo para los dos ventiladores de 140mm que evitan vibraciones y ruido de esos ventiladores, te ahorras 8 tornillos y dejas que el ventilador sin atornillar, a mi me gusto esa idea y simplemente los conecté dejandolos sobre esas gomas, sin atornillar ya que esta pensado para eso. Es muy facil de desmontar, tanto los paneles como los cristales, yo tuve que desmontarla toda para meter todos los componentes y fue todo muy sencillo. Requiere tiempo y si es la primera vez que montas un pc puedes tardar un poco más, pero consultando en internet y con los manuales vas avanzando, en mi caso use IA para hacer resolver dudas que tenia y algun que otro video de youtube, por si a alguien le sirve. Conclusion, la caja no tiene ningún pero, no le falta absolutamente nada, viene equipada y preparada para todo y el precio que tiene la hace todavia mejor, tal vez el tamaño sea un poco grande para algunos, al ser doble camara es más ancha, para mi esta genial y hace que fluya más el aire, en mi caso buscaba una asi precisamente para eso. De todas las cajas doble camara, esta es la mejor sin duda en relacion calidad/precio. Otras cajas de doble camara te sacan los ojos con 200 300€ y son mil veces peor.

ممتاز وسهل التركيب

This is a really great case, and the price is unbeatable for what it is. Good: -Very sleek look. -It's a full ATX, but is compact and offers lots of space with the Dual-Chamber design. -It's made with steel, and the front and side panels are tempered glass. No cheap plastic parts. -All panels simply pop right off with no hassle, front and back panels secured with thumb screws. -Cable management is a breeze in this case. There are channels made in the case to run your cables through, with straps to help keep it organized. -Comes with 3x120mm fans in the front. With space for 2x140mm fans at the bottom and 3x120mm fans at the top. Plenty of ventilation as well to help keep your PC components cool. -Even with all the ventilation holes it manages to keep things quiet under load. -Lightning USB-C front side. Bad: -Came a little banged up, but nothing really noticeable. -I'm certain that one of the 120mm fans that came with the case will have problems in the future, as it's already making some minor noise.

Bought for rs 9k ($105). It came without any defects. White colour is perfectly white (no difference from pictures shown), airflow is good. Size was a bit wider than expected. Too much space, easy cable management and connection, very functionable, idk what to say but overall, definitely value for money. Update: after 1 month two fans aren't working

Very nice case I have been wanting this case for a long time and everything is easily to access