Carex 3.5 Inch Raised Toilet Seat with Arms, Round Toilet Seat Riser, 300 lbs Capacity, Elevating and Raising Seat for Elderly and Handicap, Universal, Slip-Resistant with Padded Handles, White

Measured our toilet to make sure this is the height we needed. The toilet seat is perfect for hip surgery and support. Just tighten well it works great. Thank you. The price is reasonable the quality is great. Comfort is good not uncomfortable.

The item is easy to assemble and install. The only issue: the seat is anchored at the back and slides (slightly) side to side on the toilet. I installed Velcro strip at the front between the seat and toilet which resulted in no movement. I suggest the vendor include a small strip of Velcro to anchor the item at the front.

2nd one I've had. lasts under 2 years (I'm 168 lbs) before the front bottom crumbels. Good fit. Sturdy. The posted "details" should be revised as they they say "floor mounted" which I knew it wasn't, since I had it before, and I didn't want anyway & it obviously is not.

Purchased for my husband after his hip replacement surgery. Worked so well we have kept it installed and continue to use it. Comfortable and easy installation.

This is a lifesaver. I read a lot of reviews and looked at a lot of products. Some said the seat shifted, so I was a little skeptical. I bought it because I have arthritis in my knees making rising and sitting painful. This is a perfect height and has completely eliminated any discomfort. I didn't install it, but it looked pretty straightforward. Also there are rubber strips on the underside that make contact with the toilet. It doesn't budge at all. I find I don't need the handles, but at some point if I do need them, good to know they're there. It seems well designed and made. One caveat, I have a toilet that flushes from a button on the top of the tank which means I have to close the lid in order to flush. Not a big deal and at some point I likely will have to replace the toilet. I would never buy a toilet that uses the top of the tank in that way. A plumber unloaded it on me without my knowing how it flushed.

The seat seems well made and engineered for the purpose. The grab bars seem weak so I wouldn't put too much weight on them when getting up. The worst part of it is the way it's attached to the porcelain toilet. There are two elongated slot for the two bolts to go through but they are tightened underneath with wingnuts. The bolt must go through the original seat, the riser seat slots, and the porcelain to snug it all together. The bolts are long and to keep the riser and seat from moving side to side the bolts must be really snug but careful of cracking the porcelain with a lock washer when snugging down. The wingnuts are on the bottom so they're very hard to put eyes on. You have to go by feel, especially if the toilet is close to a cabinet or the bathtub or both. Wingnuts are designed to tighten with fingers, not a wrench. I put vice grips on them and used a power screwdriver to tighten from the top but they still loosen easily within a day or two of use. To install the riser securely you should throw away the wingnuts and buy a regular nut with lock washers and use a proper wrench to hold the regular nut in place while tightening the bolt from above. Also the Phillips/straight head bolt is poor quality and hard to tighten without stripping. Best to get better bolts also. All together I rate this seat poor quality. If you can get the seat to stay securely in place it works OK.

Perfect high rise for toilet. Great for someone that has trouble getting off toilet. Perfect fit and good quality.

Rarely to I give 1 star reviews. I often just return poor products, get a refund and move on. In this case with the nature of the use, guess we will keep it. 1. The attachment hardware contains washers that are too small for the forward backward positioning slot opening in the seat. Problem here is that they end up going in at an angle. 2. The wider plastic washer also is too small for slot but I expect it was for under the toilet. Problem here is that there are newer better parts for the under part of ceramic toiled that come with seats event form Walmart. They snug up into the opening and damage nothing. 3. The wing nuts for the under toilet seat cannot be turned all the way as they eventually hit the side of the bowl and cannot be turned. This could be depending on the bowl design but again see #2 as a manufacture like this should be aware of better parts. Bottom line is seat would never be tight. 4. I used the better connectors from the regular seat we had to take off and we bought from Walmart. Their threads worked with the bolt supplied. 5. To tighten down, you had to have the washer either at one end or the other end of the forward back positioning slot to prevent it tilting into the slot. So if your best position was anywhere but those two locations it would not work unless you found better washers. Even at that you would find it hard to keep the bolts at those positions as you locked it down. 6. The head of the bolts and washer are on the seat surface so expect bolt marks in your behind. The seat should have a recess for them and a cover. 7. The height is not much more than a good padded seat but is higher. 8. Seat is not soft but that seems to be the standard. 9. There is no lid. Expect your dog drinking it. 10. Cleaning it is ok, but to clean between it and the top of the toilet seat is going to be a big job because you will have to unbolt it. Mold will build in that crack. Again there are easy to lock and unlock mechanisms for seats and the mfg should use them. 11. Handles are strong but have no adjustable levels. For the price, this is a gross overcharge and the product is not something of quality to expect from a brand name. I suspect that what is offered here was a fully packaged manufacturing batch that had wrong hardware and it was pawned off to another distribution channel or vendor to get rid of it.

Easy to installed great to help after a hip replacement surgery

Le funciono muy bien a mi mamá, que tuvo una cirugía reciente y no se podía agachar mucho. Es resistente y fácil de instalar.

This raised seat allows you to add on your own seat and lid. Long bolts are provided along with wing nuts and washer. I have installed one for my husband and another for my 91 year old mother. It took me about 20 minutes to assemble. The elongated model fit my mother's toilet more fully than our rounded model. As was stated in other reviews, the seat does slide from side to side slightly. I have not yet decided if I will solve this issue with 2 sided tape. My husband who has ALS, finds it easier to get off the toilet using the raised arm rests. It is easier now for me to assist him in getting up. My mother also finds it much easier to raise herself up. I would buy this product again.

Screws are too thick not possible to fix by any means and there is no policy to return product.

Bought this for my mom. It is easy to install and is very sturdy. It’s not very wide, so if someone plus size uses it, it could be uncomfortable.