Portable Car Lift - 5,000 LBS Capacity, Extended-Length Plates, 25.6" Max. Height, Heavy-Duty Carbon Steel Truck Lift with 120V Power Unit

Very nice unit. Good price and shipping. Best part is coming pre built all you need to do is add oil and you’re ready to go. I’ve used it on 4 different vehicles from an S type jaguar to a Ford explorer and it gives me the clearance I needed for jobs from oil changes and tire rotation to a/c replacement. If you can’t use a full size two post this is a great option. Yes it’s heavy but easy to set up and take down. It’s a very well built unit.

I’ve had this for a little over a year now. So far it has worked great. I have used it pretty regularly and haven’t had any issues with it. I even lifted a Ram 1500 quad cab easily, and left it on the lift for about 3 days and it never dropped or moved. I would definitely recommend. I’m not a paid professional, just a backyard mechanic giving his opinion.

First impression review. This crate is HEAVY, probably 450 lbs. I took the box apart and removed the contents. Pretty straightforward assembly - 2 handles and 4 casters on the lift. I didn't install the extension plates yet. Unpacked the motor/pump/tank assembly and filled with ISO46 hydraulic fluid. Ran out of time so put off operation until next day. Came out to garage and found a 3.8 liter puddle of fluid on the floor. Cleaned up the mess and cleaned the pump assembly, thinking there was a loose fitting. Had to remove the assembly from its mounting bracket to access all fittings and plugs. Didn't find any loose. Then noticed fresh fluid on the reservoir. The reservoir is cracked or a poor weld (likely) at the flange weld where the reservoir mounts to the pump. Now I have a $1400 paperweight in my garage. We'll see what Vevor's warranty is like.

Had it about a week, works well, no issues encountered. I have a 69 mustang I will use it on but other cars as well. Lifted with no issues, nice an level, rock solid support. It is heavy to move but I just keep it under the car and slide it into position when needed. I would not hang on the wall, to heavy, but you could if you want. Order fluid with it as local store did not have the type specified for it in stock. Shipping was FAST had it 5 days after order. Box is HEAVY so be ready to take the parts out and put them where you need them unless you have a pallet jack to move it around unboxed. Good height to get under car, way better than floor jacks I have been using, a lot more stable and safe too. Only minor negative is the locks can be hard to see when they engage as they are black on black. I intend to paint the teeth white so I can easily see when they engage. Well built, strong, and no issues it worked perfectly out of the box. Good price and I would recommend.

Does all the heavy lifting with ease, except when you need to move it (heavy as heck), doesn’t take up much space, a decent price!

This damn lift has been the best garage purchase ever!!!! I love my lift and it has helped so much when working on my cars! It can handle the stress and the stays up in the air. I have left it with a car on it for about 2 weeks with no leaks, and no signs of lowering. It’s super easy to use and is very straightforward to setup! It’s super heavy though so be prepared to have help if you’re not able to lift heavy weights. It’s very sturdy in design and simple. Honestly really enjoy having it in my garage!

This lift assembled with reasonable ease once it was unboxed. The packaging was a little wonky, but I managed to get it sorted after I had all of the pieces laid out. The instructions do not suggest how much ISO-46 fluid is necessary for proper operation but it appears to be about a gallon. On initial use I had to add additional fluid during lifting to achieve maximum height. One of the four locks does not automatically engage at full height; it has to be manually clicked into place. The lifts do not slide easily under vehicles when supported on a regular broom-finish concrete surface. They probably do better on a slick garage floor. I supported them on timber decking to help. I discovered several fittings loose on initial use after fluid leaked onto my driveway. On release of the locks once a vehicle's wheels are firmly on the ground the lift takes quite a long time to drop the remaining distance for stowing. I am not sure if this has anything to do with the fluid volume or the loose fittings. This product is VERY HEAVY. The vinyl wheels are barely satisfactory for moving them about. The hoses are a good length and attach securely to the lifts and the pump. It takes about 90 seconds (±) to lift a vehicle to full extension/height once in place. So far I have lifted my wife's 2018 Nissan Pathfinder and my 2015 GMC Sierra SLE/Z71. I used the lifting columns for the Sierra and the mat blocks for the Pathfinder. There needs to be supplied a component for vehicles with pinch-welds at their lifting points. I will likely have to fashion something out of 2x4 or 4x4 for future use. This seems like a 5-star product on paper but in practice it falls a little short of expectation mostly due to inadequate instructions, initial quality, and build tolerances.

I bought one of these vevor 7000 lifts. And when I wanted to raise platform up it would not go up so tried contacting vevor no phone# you have to text them a message. They will send you a video on how to bleed system. Remove the 2 bolts on handle, look strait down were the handle was that you removed you will see a 7/8 bolt that's the bleeder bolt, you will have to remove the 2 bolts under the unit to remove the cover to get to bleeder bolt, fill unit aw 46 or iso 46 aw- anti wear- I used aw. When bolt is removed hit the up button on remote and let some fluid out about 4 ounces. Put bolt back in check fluid meter add if you need to. Press the up button and it will go up but don't go past 12 inches, now put it back together. Don't go past 12 inches only because there's no weight on lift if you go to the top lift will be stuck in that position the reason is from ground to 12 inches there's no weight that's were lift goes flat only not at 18 or 20 inches. Mine goes flat but you have to keep and hold down button for at least a minute or two. I was frustrated, went to youtube. Even more frustrating. I hope this helps. Vevor needs to update customer support. No phone# you can chat with them. Send email and get there bleeding unit video.

Was a little skeptical as I’ve seen competitor models and didn’t know how I felt about them. This showed up pretty fast and was packaged nicely in a crate containing everything needed. Upon first taking out of the crate it is pretty heavy but this is a good thing. I’d be a little worried if it was too light considering it holds 7000 lbs. set up was easy just add hydraulic fluid and your pretty much set once you connect the hoses. My test subject was a Subaru outback and this thing lifted it with absolutely no effort. Lots of clearance under the vehicle for working on it. I’d recommend to anyone with a garage that works on their own vehicles and as long as you use it as it’s supposed to be used it’s safe. Oh and the added bonus is you get the higher lift blocks for trucks(competitor charges extra for these) so all in all totally worth it!

This thing had been the best money I’ve spent it makes it so much easier doing struts changing winter tires and it is very secure and sturdy

This thing is Amazing and it has so much more than it advertises. It picks up my ATV, snowmobile, compact car, 1500 truck. Being split, you can work on the center of the vehicles transmission, driveline without obstructions. You can use one lift and with a 3/4 inch plywood attachment locked into the block holes, raise your ATV or sled with a milk crate under the bulkhead. It takes up no space. You can drive over top of it with compact car and park daily. It is heavy, only small adjustments to lift with one or two. Yah very happy! You can even raise it up and throw a piece of plywood on it and have a garage party. Portable too. One of the Last best purchases I ever made! Just drying out clutches

Heavy, poor instructions, great value, will try it out soon, good packaging, arrives in a crate, needs assembly to be useful, looks of good quality, we will see, first time is today asking question about why there is 4 slotted hex keys, vevor has many interesting products, so far so good

They work as they should. No complaints. Make sure to have lots of space available on all sides if using in a garage.