Waterproof Ceramic Glue - 30g Clear CA Glue for Pottery & Porcelain Repair, High Temperature Resistant, No Smell After Cure and Food Grade & Invisible Fix

This glue worked like a charm and the bond it made seems to be very strong ... I am not worried the piece will lose adhesion. I used this on poly-resin statue and the piece that needed to be repaired had a very small surface area to work with. I tried other super-glue type brands but they didn't hold and likely because they were specific to ceramic materials. This product did the job and was very fast in curing ... only a minute or two of me holding the pieces together is all it took. Also the pipe-like tubs that can be connect to the dispense tip was icing on the cake and allowed me to carefully dispense the liquid only where it was needed and no spill-over or cleanup needed. The bottle is a good amount so will last a while, if and when I run out I'll be re-purchasing this same brand.

This works great! My husband dropped his coffee cup he had bought at a baseball game, on the way out and the handle broke off. I was able to fix it. The cup has been used and washed multiple times and it holds great!

I was able to glue a chunk of ceramic back on one of my favorite coffee mugs! It's held up very well

Good glue, leaves a slight residue even after wiping but seems food safe and residue is just stuck to ceramic. Make sure to clean out tips after use unless you plan to use it all in one go

I broke a favorite old soup dish so I ordered some Ultimate ceramic glue and it worked beautifully. It does dry very quickly so best to put a thin line of glue along the cracked edge quickly too. I say a thin line because this glue is so good you don't need much to do the job. And if you put too much on, it will squidge out from between the edges when you press the sides together and because it dries so fast, you might not be able to just wipe the excess off.

This is cyanoacrylate glue in a well-designed package. The long flexible nozzles are critical for avoiding clogs and precise application. To get the most out of the package, here are instructions the seller forgot: Prep: * Blow compressed air through the nozzle to test if it is clogged. * Have scissors handy to trim the nozzle if it is clogged from last time * Before trimming, you can flex the nozzle around the clogged area to break up the clog and blow it out. You might avoid trimming this way. * Work on a disposable surface and wear disposable gloves. Have disposable paper towels handy for cleaning any stray drips. During: * Always use a nozzle. (3 included) Cleanup: * Blow compressed air through the nozzle immediately when you're done gluing so it doesn't clog. * Point the nozzle toward the disposable surface when clearing with compressed air so it catches the glue droplets. * Before putting the top on the bottle, place it upright and clear it by squeezing gently. Wipe off the glue from the top so the bottle is not clogged next time. Put the cap on immediately afterward. * Ensure the bottle is tightly capped. You can blow through the nozzles instead of using compressed air above, but then you risk getting glue in your mouth. The moisture from your breath can cause the glue to harden more rapidly.

Unbelievable strength! Don’t get it on your fingers!

I used this to seal up a crack in a ceramic plate I made. This is clearly the WRONG product for this purpose because the glue flakes off. Super gross and scary; I don’t want to ingest this stuff! The glue has now mostly come off and the crack is back.