PUTORSEN 17-49 inch Premium Aluminum Heavy Duty Dual Monitor Arm for Ultrawide Screens up to 44lbs, Vertical Stacked Dual Monitor Desk Mount, Full Motion Dual Vertical Monitor Mount, VESA 75/100,Black

I found the product to be of high quality and fairly easy to install. If you can assemble IKEA furniture, you can handle putting together this dual monitor setup although you may find the instructions comparably frustrating to what comes with that IKEA furniture. I recently purchased a 2nd 32" Dell monitor and wanted to operate dual monitors on on my desk. They were not the same model and had slightly different factory stands so they screens didn't line up perfectly. I also wanted to be able to rotate one of the monitors around so that someone sitting across from my desk could view a screen. Each monitor weighs about 23 lbs so I didn't want to purchase something that was barely rated to handle it. The PETROSEN HD monitor stand seemed to fit the bill pretty well and I'm happy with the purchase after getting it setup. INSTALLATION: The instructions that come with it are almost completely based on diagrams with very little written instruction. That being said, the instructions are fairly intuitive and they only had me guessing a few times. I chose to drill a hole through my desktop as I felt that mounting option would be the sturdiest. Fortunately I was able to drill a hole once and make it work however the base of the mount is about 3" deep x 4" wide so it would conceal mistakes if you needed to relocate it a few inches in any direction. I did manage to brake one of the plastic pieces that helps hide the wires on one of the monitor arms but I may have been able to avoid that if I paid closer attention to the diagram in the instructions. I spent just as much time trying to figure out out how to remove the factory stands from my monitors before attaching the mounting plates to them. The package comes with two Allen keys to do most of the installation steps however I'd recommend also having a Phillips head screwdriver on hand for the assembly. OPERATION: After installation, I had to make very little adjustment to get the monitors aligned and they are holding their position well. It accomplished my goals of aligning the screens while also allowing me to rotate one around for someone sitting opposite my desk. I also have them elevated a little more than where they were positioned with the factory stands which also has freed up some desk surface. OVERALL THOUGHTS: This is a well designed dual monitor stand that can handle some large and heavy screens. It did cost more than several of the options I looked at but they are well built and I don't have concern that my monitor arms will sag our worse yet, topple and cause damage to my monitors. If you are looking for a high quality dual monitor stand, I believe you will be very happy with this one.

This vertical dual monitor mount from PUTORSEN is an excellent choice! I’m using it to hold two 32-inch monitors stacked vertically, and it handles the weight effortlessly—no sagging or wobbling at all. The build quality is solid, and the materials feel premium and durable. The arm is fully adjustable—you can easily change height, tilt, and rotation to suit your ideal setup. I use it for programming and design work, and having both monitors vertically aligned keeps my workspace clean and boosts my efficiency. Installation was straightforward, with all necessary hardware included and clear instructions. For the price, this is a fantastic deal. Highly recommended for anyone looking to save desk space and improve workflow!

This PUTORSEN dual vertical monitor arm is solid and well-built, holding my large ultrawide screens securely. The installation was easy, with both clamp and grommet options included. Once mounted, the arms adjust smoothly, making it simple to tilt, rotate, and stack monitors vertically. It saves desk space and improves ergonomics, perfect for multitasking and a clean setup. A great investment for anyone needing a professional workstation.

So this didn't work out for me as expected. It's sill usable but for my setup it will only work as a side by side where both monitors are in landscape mode. I have a 27 inch and a 34 inch widescreen monitor, I was hoping to stack them on top or use one monitor in portrait and the other in landscape. This options didn't workout when stacked the lower monitor has to be so low to the desk that there is barely any space between the desk and the monitor. This also places it below my eyeliner so that was another negative for me. I think this could have been remedied if they offer an extension tube so that the arms can be moved further up. When trying to have one monitor in portrait and the other in landscape I had to have the arms bent in awkward ways, I also have to mention my desk is close to the wall so I can push the arms past the desk. Because of this I couldn't get the configuration I wanted with out have a huge gap between the two monitors. This of course is because I'm using two different monitor styles which is understandable. Overall the quality of the arm is great and I think it would work best if I had two identical monitors. Setup was easy the videos in this product page helped. The only caveat is that you have to take the mount apart if you need to make adjustments like moving it to the left or the right. I originally placed it dead center to my desk but that didn't work out so I had to disassemble it three times before I had it where I wanted it.

Ottimo prodotto, di montaggio intuitivo anche se un po' laborioso. Io ho montato due video, uno più vecchio che mi serve da monitor secondario e un LG 29", 21:9 . Il tutto è stabile, e ha l'innegabile vantaggio di lasciare più spazio sulla scrivania e di alzare notevolmente la quota dei video in modo da poter assumere una posizione più eretta sulla sedia. Ma soprattutto i gatti non potranno più romperli buttandoli a terra. E comunque piace anche a loro.

works good for my to big 49" monitors ! can recommend, top product !

Questo supporto a doppio monitor è ideale per schermi da 17 a 49 pollici, con attacchi VESA 75x75 e 100x100. È dotato di pistoni a gas, che permettono di regolare facilmente l'altezza e l'angolazione dei monitor. Personalmente, lo utilizzo con due monitor ultrawide, uno da 34 pollici e uno da 49 pollici, Odyssey G5 e l'Odyssey G9. La qualità di costruzione è solida, e la gestione dei cavi aiuta a mantenere l'area di lavoro ordinata.

I have 2 x 35.5-inch widescreen curved Samsung 4 K monitors. You might get 2 x 36 inches, but no more, if you want side-by-side. The arm works to allow side-by-side. Super sturdy and well-built. The arm supports the weight and is adjustable. These monitors are heavy. It is effortless to assemble and easy to adjust to the correct weight tension; the tilt tension is super solid and adjustable as well. Cable tidy is super handy, and the desk space is free now, which makes this super worthwhile. As I am greedy, I also have 2 x 36 LG 4ks at Home, so I may get another arm for home as well.

Auch an meinem Home-Office-Arbeitsplatz soll mir ein zweiter Monitor das Arbeiten erleichtern. Nach wie vor ist "Platz" auf einem Computerschreibtisch das große Thema und für mich kam daher unbedingt nur eine separate Monitorhalterung in Frage. + Gewohnt schnelle Lieferung + Die Verarbeitungsqualität ist sehr gut. Alles ist sauber verarbeitet und lackiert / beschichtet, die Gewinde sind gut geschnitten und freigängig, es finden sich keine Grate, scharfe Kantren oder ähnliches! + Alle benötigten Werkzeuge (2* Inbusschlüssel) die man eventuell nicht im Haus hat, sind beigelegt und von guter Qualität. Zusätzlich wird nur noch ein Kreuzschlitzschraubenzieher (PH2) benötigt. + Die Anleitung ist sehr gut aufgebaut. Wer Comics lesen kann oder mit IKEA klarkommt hat auch hier keine Schwierigkeiten. Der komplette Aufbau, inkl. Monitorbefestigung, war in 20 Minuten erledigt. + Es liegt sowohl eine vormontierte Klemme für Schreibtischplatten von ~ 10 mm - ~ 85 mm Stärke als auch eine Befestigung für durchbohrte Platten bei. Ich habe die Klemmvorrichtung benutzt. (Für die Bohrung benötigt man natürlich eine Bohrmaschine und einen Bohrer (10 mm), eine vorhandene Bohrung darf bis zu 60 mm Durchmesser haben). + Die Monitoraufnahme ist sehr durchdacht gelöst: Zuerst wird die Vesa-Halterung am Monitor angebracht, danach das Ganze auf den Arm aufgeschoben und mit einer Rändelschraube gesichert. Bei meiner anderen Halterung mussten die Monitore noch direkt an den Haltearm angeschraubt werden, was bei großen und schweren Monitoren heikel werden kann. + Die Höhenverstellung lässt sich über 2 Arten einrichten: Zuerst über die Aufnahme der der Arme auf dem Halterohr, danach einzeln für jeden Monitor über den jeweiligen Haltearm. + Die Gasdruckfedern sind für meine beiden Monitore (24", je ca. 4 kg) ausreichend stark und lassen sich mit Hilfe des Inbusschlüssels schnell und dauerhaft einstellen. + Insgesamt sind die Verstellmöglichkeiten über alle 3 Achsen in einem großen Bereich möglich. + Die Monitore können einzeln auch um 90° gedreht werden (Pivot-Darstellung). Wenn es also nötig wird (und der Monitor diese Funktion beherrscht!) kann man schnell "hochkant" arbeiten. + Die integrierten Kabelkanäle sowie die am Halterohr befestigte Schelle sorgen für einen aufgeräumten Arbeitsplatz ohne Kabelsalat. Ich bin vollkommen zufrieden, finde den Preis mehr als fair und empfehle diesen Monitorarm uneingeschränkt weiter.