CaseBuy MacBook Air 15 inch Trackpad Protector Cover 2PCS

This trackpad protector is so thin and has such seamless adhesion that I constantly forget I even installed it. The easy to install process was a breeze—no bubbles or annoying edges—and the appearance and color match my MacBook so perfectly that it’s basically invisible. It doesn't interfere with gestures or clicking at all, maintaining the original image quality and feel of the hardware while keeping it safe from oils and scratches. If you want protection that doesn't ruin the aesthetic of your laptop, this is a total win. It just works exactly as it should, which is the highest compliment I can give a piece of plastic.

After developing an irritation in my fingertips from using the MacBook’s trackpad (had to research this, and glad I’m not the only one!) I decided to purchase a cover for it. This one is relatively cheap, and works! There is a gap all around the edge of the cover about the thickness of my fingernail, which actually helped with the fitting of it. Note that the cover has two protective films, and these are labelled so that you know which to remove first. This would be my suggestion for fitting - Dry fit the cover, to get an idea of the placement. - Clean the trackpad, then clean it again. Even small dust particles will affect the overall finish. - Peel off the first protective film, and HOLD ONLY THE EDGES OF THE COVER. Keep your fingers away from the sticky surface to avoid fingerprints - Judge the distance from the edge of the trackpad (I used my fingernail, knowing that it would be the same distance from the edge on the other side of the pad, and as I am right handed, found it easier to work from the right) and lay down the first half inch or so, gently pressing into place. - Using the cardboard sleeve that the cover is packed in, smooth out the cover as you slowly lay it down onto the trackpad, working about a half inch at a time. This will help avoid large bubbles, but don’t press too hard at this point, - When the cover is in place, check for any small bubbles and squeeze them out to the edges. - Remove the second protective film, and use the cardboard to smooth over the cover, from the middle out, which will help stick it down, and also remove any remaining bubbles of air. - Enjoy! After reading through other reviews, I don’t understand why there are so many problems with air bubbles. Unless the product is flawed already, or the trackpad not completely clean, the bubbles are introduced during fitting, as the cover is just a thin, very flat sheet of plastic. It feels quite nice to the touch, with almost the same texture as the trackpad. The size and shape are pretty much spot on and, after fitting, I can’t even see that there is a cover in place. The thickness brings the trackpad about level with the palm rest. There is no change to the way the track responds, but I have the type that clicks when pressed—I don;t know how it reacts to the type you simply ‘tap to click’. Just take your time fitting it—it’s a great product (and no, I’m not getting anything for this review--it’s my own, unbiased opinion).

This trackpad protector was so easy to apply. No bubbles at all!! I love that while it protects my Macbook's trackpad, it is almost unnoticeable. It is true what other reviews say that the cut of the protector is not a 100% match, but I would say it's a 95% match and barely noticeable. I recommend it. Additionally, I've found that the protector doesn't interfere with the sensitivity or responsiveness of the trackpad, which was one of my main concerns before purchasing. It has a smooth texture that feels just like the original trackpad surface, allowing for seamless navigation and gestures. The installation process was straightforward, thanks to the clear instructions provided. Overall, this trackpad protector offers excellent value for the price, providing reliable protection while maintaining the sleek appearance of the Macbook. If you’re looking to keep your trackpad in pristine condition without compromising on functionality, this product is definitely worth considering.

This Matches Mousepad Cover Sticker? A total win. It fit my device perfectly, hasn’t peeled or gotten stuck, and it’s lowkey been a game-changer for keeping my workspace clean and smooth. ✨ No grime, no gunk just clean clicks and good vibes. Does seem like a scratch resistant and durable. Definitely a simple fix that makes a big difference. 💯 Would grab it again without hesitation!

UPDATE: Do not buy this! I literally cannot get it off. It’s like I applied it TOO precisely and now I can’t get a corner to grab. I’ve noticed some issues with my track pad already such as issues with it recognizing a simple tap to click on things, and this is a BRAND NEW laptop. I’m so pissed off right now. I’ve tried everything to get it off and it just will not come off. I actually bought this months ago when I first got my new laptop and I completely forgot I had it until tonight. But I just put it on and I'm so happy I bought this little thing! Who knew something so simple and small could be so helpful. For once, it definitely gives me piece of mind knowing my track pad is protected from scratches and other wear and tear. And it was super, super easy to install! I normally have so much trouble applying screen protectors, but this was super easy to line up and there are NO BUBBLES... can you believe that?! I can't... I'm still shocked LOL. Highly recommend this! Oh and it hasn't affected the track pad at all so far. My mouse and touch commands still work perfectly and normally.

This is a nice little protector that works great for the price. Is also very easy to apply. There were some bubbles at first but most of them have been smoothed out. I don't really mind though because I barely notice them and the cover is doing its job fine so far. It's very easy to wipe off fingerprint smudges and dust. Also doesn't hinder my mobility of the trackpad and despite what others have said, I don't find the glossy texture weird or off-putting. Some also don't like that it's thin, but I kinda like it. Doesn't make the trackpad feel bulky or slow its movement down. But that's my personal preference and if yours lines up with mine then I think you'll be okay with picking this cover. My best advice is to apply this when your Macbook Air is turned off, make sure you've wiped off the entire trackpad before starting, and take it from the bottom left corner and work your way up. Slowly pull it evenly over the trackpad and as you're doing it, run a debit/credit card over it to eliminate the bigger bubbles. The trick is to be very slow and careful. Then when you see everything is even you can run the card over it again to smoothen out any residual bubbles. If there are some, don't worry too much. They fade over time. My friend taught me that trick and it works very well. Just be patient because if you're like me who couldn't be patient to save her life, then you may wind up some bubbles at the end. They can fade though, so no worries. And they're really not noticeable, at least mine aren't. Basically what I'm saying is, give this cover a try and chances are, you'll find it was worth it.

This is shiny, not matte as I anticipated, so my finger drags quite a bit while trying to use it. Also, no matter what I did, there were a ton of bubbles, and it didn’t apply smoothly. Plus, the sticker on the non-sticky side refused to come off, causing the protector to pull up and create even more bubbles, and there is now sticker residue on the “usable” side of the protector that I can’t get off. It’s going in the trash.

It definitely does the job but mine bubbled and stayed bubbled. I followed all the steps too.

I love when a product is easy to use and great all around. There are instructions, and also little tabs that note when to remove them (before applying/after applying). It is sooooooo easy and I am usually horrible with this stuff. 10/10!

Thank you

No Special 、Good Product

No es tan fácil de instalar pero si sirve

Esta muy bueno, cubre perfectamente, no se siente, no cambia la velocidad del puntero. Cumple con lo que promete. Solo para colocarlo si hay que limpiar bien para que no se formen burbujas.