Adventurer 5M Pro 3D Printers with High-speed Printing,Max 600mm/s, Rapid Heating with 280° Nozzle,Internal & External Circulation Dual Air Filtration,Achieve Smooth & Effortless Printing

Still to this day Its a solid printer! After my1200hours of printer I have updated and upgraded only minor things. Its 1500 hours and still running. I also got 2 for my school as D&T teacher and business account get it cheaper £330 it was and £305 now with the discounted price. I have updated the belt with I hated but it doesn't make much of a difference! I used to think its going to be a headache but it was 20min with NO disassembly required! I kid you not. As a High speed printer it’s very fast and it has a lot of torque! So the standard Belt was made to break! The printer will outlive the belt. Fastest way to change the belt is to undo X first from both sides of the printhead, glue one side to the new belt, then just pull through and feed the new one in place. Its that easy and its only 1.5/1.3meters of belt required for X and same goes for Y axes. Printable have a good 5M/5MPro communities as well as Thingyverse. Fot new tool head cooler and such. I advise you to go on Alibaba for part cooling fan if you break it like me or for toolhead fan. Its only £2/£3 each on their and no where to be found on Amazon or Temu. It works a charm. The top lid extension is a must! (You now if you know) Extended Bowden tube and replacement is a must! (Stock one is fragile and incompetent) -grey with 2mm inner bore is a good option. Flexible bed - many options for 256x256 same as many others (cheaper on Aliexpress) And printouts for grills and others such as part cooling clip for safety and long prints is a must if you like tinkering! I tried others such as 2 Auxiliary fans which is a waste of time and money! Do not do it. You could get Opensource Klipper firmware update, BUT stock one is really solid and has updates regularly. You can get better silicon feet than stock ones which are only mentioned to be anti-slip, it does eat up much of the vibrations. Future upgrades I am looking forward to getting a 150x150mm 15mm thich iron plate to weigh down the printer under the bed at the bottom of the cavity as the printer is too light and much the inertia if being transferred rather than disposed off. I want to appreciate and celebrate 🥳 the awesome 3D printer that is both usable and easy to use by far from any other project printers like Creality K1 with an unbeatable price range. I want to shout out to Flashforge for future upgrades and options for UK schools. For inspectors and obligation issues. Latching doors, emergency 🚨 stop button! Filter for intake! This meets 2 levels of safety in the classroom and workshops. And very easy fixes. I have designed and will be releasing the 5Mpro latching for both doors on Thingyverse. The emergency Stop button integration which is basically replacing the switch on the back with a push to break latching button with red and yellow colour. It would be awesome if there was a printable version with a simple limit switch embedded for everyone to tinker!

Unboxing the printer meant lifting from the box and then removing the foam from the insides, unscrewing four bed retaining screws, mounting the reel holder and your ready to go. The automated initial setup ran through in about 10 minutes and then it printed a cube ! The second print of scraper wasn't so successful, lifting at one end and hitting the print head. After a really good clean of the plate, and using some 3DLAC spray, every print since has been perfect. Its almost as if the bed has some oil contamination from new. Its fast and the results are fantastic. Kit includes the 0.6mm nozzle too, tools to setup and adjust and a pair of snips to cut the filament. Probably the only thing missing is a scraper, but one of the built in models is that very item. The magnetic bed lifts easily meaning it can be popped out to remove prints and for cleaning. For my first ever 3D printer, I was up and printing from unboxing in less than 30 minutes. Once powered up it goes through quite an extensive setup procedure, including a vibration test, so its worth positioning in its final position before powering up so that the effect of the location is compensated for from the get go. Changing spools is quick and easy, and a nozzle swap takes mere minutes. The included tools are ok, in fact you have everything you need (apart from that scraper) in the box to get started. Just printed a palm sized Mariocart figure in PETG without a single flaw. Left to its own devices overnight, it has come out better than I could have ever expected. The flashprint slicer that turns your 3d file into a printable object works well, but if you have never printed before, have a quick read up about rafts and supports first then find the 'add supports automatically' function. Not sure why I would need to use a different one.

Out of the box and up and printing within 10 mins. Setup is quick and easy, just follow the instructions provided and you won't go wrong. I bought this to replace my K1 Speedy which has sadly broken after 18 months solid hammering. I wanted a machine to replace this (K1) and after research I decided to go for the Flashforge. As stated afer 10 mins we were up and running and the first print was ready for the printer. I used the Orca Flashforge software and it's easy to figure out. My first print was not an easy one by any standards - but WOW!!! I am over the moon with the result, so smooth and accurate it's better than anything my previous printer produced. Now I have been printing 3D for over 18 months but I really am delighted with the print quality of this device, another big bonus is that it really is a low noise machine (compared to K1) - the difference is very noticeable. The first print was so good that I can't see any need to 'tinker' with the slicer - if they all turn out like this then I am honestly delighted. A few other things worth noting - Tree supports (i use these a lot) they came off perfectly with no mess! nevver had this on the K1. Loading filament is so easy - I mean really easy. First Layer - early days but amazing!. Speed - More than happy with the 0.4mm nozzle fitted. Build quality - Great for the price point. Screen and display - all good and do the job. Now if your after a decent printer then I don't think you can go wrong with this device. In summary I am simply delighted - lets hope it serves me well.

l'imprimante réseau qui remplace les deux anciennes imprimantes avec succès. tout automatique, je prépare mon objet sur mon PC et envoie directement le fichier à l'imprimante qui gère l'impression. très facile à utiliser, quand l'impression est finie, je la range dans un meuble dans mon salon, pas de poussières rien ne traine.

Adesso che è un anno che la uso quindi posso dire la mia , ottima stampante a camera chiusa, mi piace molto il sistema di filtraggio interno , ho stampato tanti tipi di filamenti sempre con successo

Después de 1 año con ella he de decir que fue todo un acierto, sin tener la idea que tengo hoy día me puse a imprimir sin necesidad de tener unos conocimientos grandes. Actualmente no voy a hablar de características técnicas de esta impresora 3d simplemente porque hay mil y una reviews de ella, solo voy a hablar de mi experiencia como usuario inexperto en el momento de la compra y si ha tenido fallos garrafales de impresora de poca calidad. Lo primero y más importante no necesitas conocimientos de experto para poner a funcionar esta impresora, en mi caso fue, unboxing del producto, enchufar, calibraciones (automáticas), configurar su conexión, cargar filamento (por supuesto empecé con lo fácil el PLA) mandar la pieza y recibir el resultado. La interfaz de la pantalla se muestra muy simple, con varias opciones típicas de estas impresoras, todo muy intuitivo, como dije anteriormente preparado para personas que no tienen idea de impresión 3d. La máquina se ve robusta, por mi parte bien embalada y protegida, en cuánto la saqué de su empaque note calidad y pensé que como era posible, por el precio que pagué, que me pareció bastante competitivo con respecto a sus contrincantes, podía tener esa calidad. Como dije antes a partir de ahí todo fue empezar a imprimir (plug&play). Como construcción no me voy a andar con rodeos, totalmente metalizada excepto sitios que veo lógico un abaratamiento de costes, porque sería innecesario colocar metal dónde un plástico también cumple esa función. Los pilares he de decir que son robustos y en seguida notas un buen producto. En cuánto a atascos solo tuve dos y fue por error mío, he de decir que con esta impresora, estoy muy satisfecho del aprendizaje que he ido acumulando, hasta el punto de haber desmontado el extrusor (siempre con cuidado) sin saber dónde me metía, para quitar restos. Los materiales en los que he impreso hasta ahora han sido: PLA, PLA+, PETG, ABS y ahora me atreveré con TPU a ver que sale, que viéndo las características que tiene la 5mPro, podría imprimirlo sin problemas. El programa de corte para flashforge, es muy intuitivo se basa en orca slicer y es muy fácil de aprender sus características, a base de prueba-error-conocimiento (que es como se aprende de verdad) consigues los resultados deseados, aún así existen millones de vídeos y tutoriales de ello al respecto. Básicamente me volvería a comprar esta impresora sabiendo lo que se hoy? Rotundamente si, hoy día sigue siendo una impresora bastante competitiva, incluso, su precio ha bajado y la encontramos más barata, posiblemente existan impresoras hoy día que la superan en características, pero hacedme caso cuando digo que esta imprime con una calidad muy buena, y si eres capaz de afinar parámetros ya ni te cuento por el precio que tiene. Por último no te voy a decir que es la biblia de las impresoras, pero si la que me hizo saltar a este mundo tan bonito y tan complejo a la vez, de hecho casi al 100% adquiriré la nueva ADX5, que aunque soy reáceo a malgastar filamento por los deshechos que genera, si pienso que se le puede sacar partido cuando tienes que hacer clones de piezas en una misma cama. Sin más espero que os sirva mi humilde opinión que aunque os lo pinte muy bonito siempre existen altibajos y dolores de cabeza, pero al final se basa en eso prueba-error-conocimiento, un saludo

Inget negativt om produkten, fungerar över förväntan

Polecam