Samsung SSD 860 EVO 2TB 2.5 Inch SATA III Internal SSD (MZ-76E2T0B/AM)

I have an older ASUS laptop that was given to me by someone who purchased a new HP. This unit had only 4GB RAM and a 500GB spinning-hard-drive. So I upgraded RAM to 8GB and bought this Samsung 860 EVO 500GB SSD to replace the old spinning-drive. This SSD arrived and I needed to buy a $7 USB-to-SATA III cable here on Amazon so I could clone the old hard drive to it. There is a lot of chatter on here about people wondering about the best ways to clone existing drives onto these SSD devices. In my case, I decided the simplest thing to do was to use something I could boot from a USB, so it wouldn't matter what operating system was on the old drive I could clone anything. So I downloaded Tuxboot and Clonezilla and ran it to install onto a USB. Super-simple process and I was ready to roll. I then hooked up the SATA end of the cable to the SSD and the other to an open USB port on the laptop, stuck the bootable USB I had just made into another and turned on power. Booted right up to Clonezilla, hit enter through every default, ensured it was using the 500GB spinning-drive for its source and the new 500GB SSD for the target, and within about a minute it was off and running. You are presented with a lot of options. I chose the simplest, device-to-device rather than doing the source-to-image, then image-to-target. Process took around 2.5 hours and then I shut down, removed the old drive from its caddy and replaced it with the SSD, hit the power switch and the system immediately booted right up to where I had left off before I cloned it! There are a lot of ways you can clone existing drives to these SSD's. You might even want to just fresh-install your system onto one of these SSD's and that's fine. I didn't want to take the time to do that. But for me, using that $7 cable I bought here on Amazon, with the Samsung EVO 860 SSD I bought here on Amazon, and free Clonezilla install-to-USB I was able to effortlessly clone the old drive to the SSD and boot right up with it without any issues whatsoever. I had zero issues. A few benefits from having gone through this: 1. I now know how to clone a laptop drive to an external drive 2. No more motor to spin a drive, so no more extra draw on the laptop's battery to keep one running 3. No more heat from a drive motor that's constantly running 4. Excellent performance and speed with this Samsung To benchmark it for you, the laptop originally took just over two minutes to boot up. After upgrading its memory from 4GB to 8GB boot time dropped a bit, to 1.5 minutes. But after replacing the hard-drive with this SSD boot time is now 30-32 seconds, from hitting the power-switch to login. And everything else on the system is much, much faster without the extra seek times and slowness of that old spinning drive. Time will tell but so far this Samsung is functioning great, was easy to clone to, Clonezilla recognized it right away (as did Tuxboot), and it booted in my system the first time after the cloning was done. And this thing is just super-fast. Plus it's a Samsung EVO. From all I've heard and read, these are pretty reliable devices with a reliability of something like 1.5 MILLION hours. That's 62,500 days or about 171 years! Try getting that kind of reliability from a spinning hard-drive! Bottom line is these are known to be great devices. There are duds out there but by-and-large it's hard to beat a Samsung EVO device for its price-point, reliability, and performance. That's why I spent the extra $$ rather than going to a cheaper, edge-brand type SSD. I have both old and new equipment and my older stuff recognized and worked with it just fine and so far it's a screamer. I highly recommend.

I recently upgraded my computer's storage with the Samsung SSD 860 EVO 4TB 2.5 Inch SATA III Internal SSD (MZ-76E4T0B/AM), and I couldn't be happier with the performance and reliability it offers. As someone who deals with large files daily, this SSD has been a game-changer for my workflow. **Blazing Fast Speed** The read and write speeds on this SSD are remarkable. I noticed an immediate improvement in my system's boot time and the speed at which applications load. Large file transfers, which used to take minutes, now complete in a matter of seconds. This SSD truly lives up to Samsung's reputation for speed and efficiency. **Generous Storage Capacity** With 4TB of storage, I no longer worry about running out of space. This is perfect for anyone with a vast collection of photos, videos, and other large files. The capacity allows me to store everything I need with room to spare for future needs. It's a great solution for both personal and professional use. **Easy Installation** Installing the Samsung 860 EVO was straightforward. It fits perfectly into the 2.5-inch drive bay in my desktop, and the included software made cloning my old drive a breeze. Even if you're not particularly tech-savvy, you'll find the process simple and quick. **Reliability and Endurance** One of the standout features of this SSD is its reliability. Samsung has a strong track record in the SSD market, and this model is no exception. With advanced data protection and impressive endurance ratings, I feel confident that my data is safe and the drive will last for years to come. **Value for Money** While the price might seem steep at first glance, the performance and storage capacity justify the investment. Compared to other SSDs in the market, the Samsung 860 EVO offers excellent value for the features it provides. **Final Thoughts** Overall, the Samsung SSD 860 EVO 4TB is an exceptional product that delivers on all fronts. Whether you're looking to speed up your system, need ample storage space, or want a reliable drive for your data, this SSD is a fantastic choice. I highly recommend it to anyone in need of a high-performance, high-capacity internal SSD.

I bought this SSD (512 GB Samsung 860 EVO) to replace an older Samsung SSD that is over 10 years old. The old SSD was the Windows boot drive, so is the new one This review details the cloning and installation process. Essentially, you are going to clone / migrate the data (create an exact copy) of the old drive and apply it to the new drive. You may want to invest in an external SSD enclosure to help in the cloning process, I bought and used UGREEN External Hard Drive Enclosure Adapter USB 3.0 to SATA Hard Disk Case Housing for 2.5 Inch 9.5mm, from Amazon as well. It's about $10 but it will make your life easier AND once you're done, you can use it to house and use the old SSD (or any similar new or old SSD, as an external drive. So it's really useful! You may have read/ heard about problems some were having using the data migration that Samsung provides (Data Migration software available from Samsung website). I haven't tested or used this software so I will not comment on it. But I did download it and installed it (installation was problematic and got hung many times....upon googling, I discovered one must disable Windows Anti Ransomware protection (under Windows Security....) strange, but I disabled it and the installation worked. Don't forget to re e-enable the Ransomware protection when done!! So, assuming you have the SSD data enclosure, place the SSD inside it, connect to the PC using the included USB cable and you're ready to clone / migrate the data. Cloning Process: I used Macrium Reflect. You should really use the latest version, and it's not free anymore, but they offer a 30 day trial which will do the job. PS: The older versions seemed to have an issue with a fully updated Windows 10. Once Macrium Reflect is up and running, the FIRST THING you should do is create a Recovery Disk (find it under Other Tasks in the menu, and it's called Create Rescue Media). It's easy, just follow the prompts. Keep it aside just in a safe place, in case (this is useful as a Windows Recovery disk, which every one should have). There are videos on Youtube that show you what to do exactly when using Macrium Reflect, do watch them, they are easy and useful. But especially if your old drive / SSD and the new SSD are not the same size! Look for: How to Clone Windows from a Hard Disk to an M.2 SSD by a guy called ACCESS RANDOM. If the (old and new) drives are of different sizes you MUST watch: How to clone a disk drive using Macrium Reflect and resize the partition by a guy called Alex Kang. It has one step in that is essential to handling the different sizes issue. Both videos are excellent and walk you through each step. Once the cloning is done, remove your old SSD and install the new SSD in your PC (or laptop) using the same cables. Reboot the PC and test the drive for a few days. If you're completely happy and the system is stable, feel free to either place the old SSD in the external enclosure and use it any way you want or use the old SSD in your PC / laptop as extra storage (after erasing the old data). Speed: Any SSD is much faster than the fastest regular (spinning) hard drive. This SSD is fast but not the fastest on the market but it's perfect for booting Windows aka, as a boot drive, (Windows boots up in 10-20 seconds, depending on your PC). With this SSD I am surfing the web in less than 20 seconds from powering up. There are faster SSDs but gaining 2-3 seconds in Windows boot time is not really important to me. In closing, one final reminder: Do watch those videos!!

I own a Late 2013 Mac 21.5". It took about 14 minutes to shut down and restart. It was even sluggish when just using a browser, so I decided to upgrade. I had videos to make and they were affected. I was a bit intimidated about the whole process, but I already possessed the tools and there were plenty of videos on YT to show me exactly what to do. I'd say the hardest thing was installing the software. As the videos say, you have to reformat the drive, partition the storage, and install the software. I was a bit unsure about all these things despite doing them in the past. That takes time and you need to know exactly what to do. I had a good backup I wanted to install but that did not complete overnight. So I started all over, erased everything, reinstalled OSX, and treated it like new Mac. I hand installed all the old software and transferred old documents via my external hard drive. Oddly, the Time Machine backup would have taken the entire day. I got the old software in a couple hours. The result is that this old Mac is just as fast as it was brand new, maybe even faster. Now it shuts downs in seconds and boots up from a complete shut-down in about 23 seconds. Brilliant! It can handle video production and mult-tasking no problem. Also, the fan probably rarely turns on because it's solid state. Side note, when I was inside I vacuumed the heck out of everything so it's clean. I'm waiting for the adhesive strips in the mail. All said, it's well worth upgrading for $54 than dropping $2K on a new Mac, IMHO. These things are built tough and you CAN add a SSD and RAM if you wanted too. Chances are, you'll just have to replace the SSD. So if you want to revive an old Mac desktop that it's on its way out anyhow, why not upgrade? Now you know why you see Refurbished macs like this selling for $750. That's a $500+ profit in many cases for something that takes only a few minutes to do. Get this SSD. It's blazing fast and quite a deal.

I just replaced my old hard drive on a MacBook Pro 15 inch late 2011 laptop with this Samsung 860 EVO SSD. My startup speed increased as follows. - Power on to lock screen: Old HD was 1 minute 45 seconds. New SSD is 51 seconds - Lock screen to full load of desktop: Old HD was 50 seconds. New SSD drive is 13 seconds - Loading a document in Microsoft Word: Old HD was 1 minute 15 seconds. I ditched my 2011 Microsoft Word and now using Pages. Load time of document is now 9 seconds. All other programs are loading and operating must faster too. I m very pleased with the speed increase. It should be noted that greater speeds might be achieved on a newer computer with full SATA III capabilities. Some things that you should know. Samsung Magician and the Samsung Migration tool do not support MAC OS. I'm guessing that Samsung and Apple do not play nice together but hardware is hardware and the Samsung 860 EVO is by all accounts a quality product. I used a free download of Carbon Copy Cloner to clone the old Mac HD to the new SSD. You will need an SATA adapter cable to connect your new SSD to your laptop for the cloning process. CNET has some videos on how to replace the hard drive and turn on TRIM. Here is a little surprise that I got after the install. My Microsoft Office 2011 would not operate on the new drive unless I re-entered the product key. Unfortunately I was unable to find my original key and even though the key is saved in a file on the hard drive it is encrypted. After some research I determined that the key is not recoverable. To make a long story short, I ditched the Microsoft Office and I'm now using Pages. Seems to work fine but I tell this story so that you will know what to expect. I love the new SSD but the above information and the lack of Mac support would have been nice to know up front. I just got a few more years life for my laptop.

Bought an Acer Aspire TC-885-UA92 (Windows 10 Home) and wanted extra storage for videos, pictures, music, extra files for backups, documents, and even mid-ranged games. Installed this drive about 5 months ago, and also using Samsung's Magician software to optimize the solid sate drive to the computer. Recently upgraded to Windows 10 Professional and not had any issues, even with encryption being enabled. Have the drive optimized through Samsung Magician, and getting superior performance unlike I have seen. Have Over Provisioning enabled per the SSD's recommendation. Magician also checks for updates & firmware. Getting 5225 MB/s Sequential, 4704 Write, 119628 Random, 59814 Write speeds. Since I have been into computers since my 30's, so installing anew drive is easy. And this drive I set to Drive A for giggles, as A and B used to be reserved to floppy drives. Am wanting to get another one of these Samsung SSD 860 EVO drives installed to use as a backup drive for the OS, and extra storage if I ever need it. The computer the drive is installed in was placed behind the side plate where there are mounting holes for 3.5" and 2.5" drives. One of the holes did not line up, so used a zip tie to hold it down. Have not had any issues with the drive overheating, diagnostics always been coming out clean, and no bad sectors anywhere. And what I read of other reviews, there are no surface scans on solid state drives, as there are no platters or heads. That is a clue when reading bad reviews. There are diagnostics in the Magician software that should be used, not other external programs that are not optimized for solid state drives. Could not ask for a better drive. Reliable, fast, does not overheat. Almost went with a competitor until I compared warranties. Warranties show the integrity of the company, and their confidence in their wares.

PACKAGING I was surprised at how little packaging there was it came in a plastic envelope and the hard drive comes in a small box inside a plastic tray. I am not sure if the hard drive can be damage by dropping, with virtually no protection but seems to be working okay. INSTALLATION The instructions are very simple and it is a relatively simple process. You go to the Sansung website and you download the cloning software. It is a very slow and long process. It took about 5.5 hours and then as it finished it reported and error. Very infuriating to wait so long to have it report an error. It then went through a process that is supposed to make corrections, after that I ran it again and estimated I be up to 11pm waiting for it to finish. Fortunately the second time around it appears it did not go through the entire process and finished in about 1 hour. I think this where they need to improve, the software should have checked for these errors before you spend 5.5 hours install it. TRANSFER ACCURACY The cloning process was relatively accurate, but so far I have noticed one app was changed. Is a control program for the printer, it would load up automatically. It changed the settings. TRANSFER CABLE I did not realize a USB to SATA transfer cable was needed until after I got the hard drive. This delayed the installation another 2 days. The documentation says that only retail versions include the transfer cable. I did not see this in the description. PERFORMANCE There are huge increases in performance on certain software packages. I used Outlook daily and it loads almost instantly. I delete a lot of junk mail and when I delete several hundred it is almost instant, before I could be waiting minutes to delete several hundred emails. I also use chrome daily and have about 15 screens open at once, it loads in 1-2 seconds as well. It used to take several minutes to load multiple tabs, now it is instant, so I am very happy with the performance on what I use daily. I have played some games and there is no noticeable difference.

I've had the Samsung EVO 860 1TB SSD 2.5 inch SATA III drive installed and running for ~2 months. Since it replaced a 1TB hard drive on a 6 year old laptop with a BIOS motherboard that only supports SATA I and Windows 10 (version 1803 rs4; Spring 2018 Creators Update). I can't speak much for performance, other than it does perform at the maximum speed allowed by the SATA I controller. I can say that the SSD is very reliable so far, with no downtime or performance issues to date. The physical installation, including opening the laptop, removing the old hard drive, installing the new SSD, and closing it up, took me about 30 minutes total, with no problems at all for that part of the upgrade. The only problem I had was not due to the drive itself, or it's physical installation, but rather the technical support I received from Samsung and Microsoft. Most drives purchased today are setup to run with a GPT partition for a UEFI motherboard. Unfortunately, since my old Samsung laptop has a BIOS motherboard, which needs the drive to be partitioned for MBR. When I went to install the latest version of Windows 10, it initially failed stating that it couldn't detect a partition, with no other detail provided in the error message. Since this is a Samsung SSD replacing the hard drive in a Samsung laptop, I called Samsung technical support, who offered no other support or advice other than to call Microsoft. A call to Microsoft technical support didn't referred me back to Samsung. Bah! After doing a some research, I eventually figured it out on my own, and from the command prompt in the recovery advanced troubleshooting section, using diskpart, I was able to change the partition to MBR, and then successfully completed the Windows 10 installation, with no further problems. In the end, I was disappointed in Samsung and Microsoft for not providing a little more help and insight into the issue, especially since it's not unusual to replace a failed hard drive with an SSD drive, even if the PC is a little dated. It would've also been nice if the Windows 10 installation gave a little more information as to what the problem is and where to find the solution to fix it. Pros: Fast. Reliable. Backward compatible to SATA I. Supports both BIOS and UEFI motherboards (MBR and GPT partitioned respectively). Good value for the performance and warranty, especially if you have a SATA III controller. Cons: You are pretty much on your own for upgrade support for older laptops/PCs. However, there are a number of articles and YouTube videos that can help you out. If you have a BIOS motherboard, and aren't technical, seek out some help. Rating: Hardware - 5 stars Support - 1 star

Have installed 5 of these now in different computers & laptops to replace magnetic drives. All working well and have made a huge improvement to Windows startup times. Programs load 5-6 times faster than before. Overall a great product!

This SSD is one of the best and reliable SSD in its category. Its read-write speed is still great (R - 545MB/s, W - 496MB/s) if compared to modern SSDs. Booting OS and loading of applications have become much faster than before (Avg. boot time - 5s). If I talk about gaming performance, it only speeds up the load up, performance-wise gain like increase in FPS is minimal (completely dependent on CPU and GPU). The Samsung Data Migration software provides a seamless data transfer to migrate data from the old drive to the new drive and the Samsung Magician software is a great monitoring + tuning app, you can tweak some parameters to improve its performance. The SSD (1 TB) has a whopping 600TBW lifetime, which means it will survive 600 TB of writing or more, i.e., massive. Overall, it's a great buy for me. If you have an SSD in mind, go for the EVO series (or PRO series, if you have that budget). P.S. - Avoid the QVO series, not much durable in terms of lifetime.

Me gusto totalmente este producto, es excelente. Utilice esta unidad SSD para sustituir al disco duro mecánico principal de mi laptop y lo que decidio la compra frente a otros es que en el momento en que lo adquiri estaba en una inmejorable promocion y precio. Lo bueno: - Cumple sobradamente lo que promete en la descripción y no tiene que envidiarle nada otro tipo de tecnologias que anuncian otros SSD de la competencia. - La garantia es de las mas amplias en el mercado ... te ofrecen muchos años con garantia y esto es inigualable por la competencia. - la vida útil en la escritura de archivos es superior, por lo que no tendras que preocuparte que a los pocos años deje de escribir datos. En este apartado encontraras SSDs en el mercado muy baratos pero lo que no te dicen es que su bajo costo esta dado porque te durara pocos años escribiendo datos (hay quienes dicen que 5 o hasta 6 años). Recordemos que en este tipo de tecnologias es importante cuantas veces se podra escribir y leer datos en la unidad de almacenamiento. En los SSDs es un aspecto crítico este apartado asi como su costo independientemente de la marca. - Con su intalación, la inversion que hagas se ve reflejada inmediatamente en tu computadora y es perceptible totalmente tanto que pensaras el porque no hiciste este cambio desde hace tiempo. Sentiras que estas ante una nueva computadora, por la velocidad de apertura de las aplicaciones o programas, encendido y apagado, aun con un procesador de poca monta. -Tiene un peso imperceptible. Lo malo: - En la instalación el software propietario decia que no podia hacerlo funcionar con la computadora; sin embargo como hice una instalacion desde cero del Sistema Operativo, éste se encargo totalmente de la configuración y puesta en marcha. - Tecnologia que es costosa y que año con año va reduciendo los precios, pero esto sucede con todos las unidades de disco duro. - Si tu desconoces como se hace su intalacion lo preferible es que lo lleves con el personal capacitado que realice este paso. Nota: ideal para instalar como dispositivo de persistencia principal o tambien en un caddy. Si o si, una vez instalado deberas de buscar en internet la forma en como debes de configurar tu computadora para que realice un uso mas eficiente de la unidad SSD instalada, asi como para prolongar su vida útil. Son consejos, configuraciones del sistema operativo que se deben de cambiar, y especificaciones tecnicas, nada del otro mundo pero necesarias para su uso adecuado.

About the Procurement: The SSD is inside the manufacturer’s carton box with seal in addition with amazon carton box upon receiving. No seen flaws or scratches. About the Product: No words can describe how happy I am with my gaming experience at my PS4 after I upgraded from its stock drive to solid state drive.

Produto muito bom, rápido e confiável. Embora um pouco mais caro que os modelos QVO mais recente, vale a pena pois dobra o número de operações de leitura/escrita, ampliando a vida útil do dispositivo além da garantia de 5 anos. Se comparado aos discos mecânicos (HDD, com motor) a velocidade de acesso é notoriamente maior. Em suma é uma boa opção para melhorar desempenho a um custo razoável. Outra dica interessante é ampliar a quantidade de memória RAM. Dependendo do perfil de uso recomendo 16GB, a combinação RAM/SSD é fundamental para um computador rápido, naturalmente depende do processador e canais de comunicação da placa-mãe (e qualidade).