UNDERFLOOR HEATING FILM ECOFILM KIT FOR LAMINATE OR TIMBER FLOORS 160W (1000mm, 6.5m)

Description

Infrared Technologies Underfloor Heating Elements offer simple and fast installation, with no need for self levelling compound. The set is available in three different widths with standard lengths up to 10m. The element lengths can be reduced on site if necessary and are supplied as standard with 5m "cold tails". Available in two standard power dissipations: 130 Watt for internal living areas and 160 Watts for conservatory use. FILM is NOT designed for use in wet areas such as bathrooms or shower rooms. FEATURES Approved to EN60335-2-96 as required by the 17th Edition Wiring Regulations (BS7671:2008) Two heat outputs - 130W/m2 and 160W/m2 Available in 3 widths - 300mm, 500mm & 1000mm for maximum floor coverage Quick installation - Simply roll out the underfloor heating elements and connect Extremely low build height - Less than 7mm Dry Installation - No self-levelling compound required Suitable for laminate, engineered board and certain real wood floors When used in conjunction with ECOMAX-DUO, FILMSET is suitable for carpet and vinyl floors EMC Safe - Tested by NEMKO 10 year manufacturer warranty *Before laying FILM underfloor heating on either a suspended wooden floor or concrete sub-floor it is necessary to install a layer of ECOMAX-LITE thermal insulation (please see our eBay shop for more information). This will minimise heat losses and ensure quicker heat-up times for the floor. It will also act as a means of sound deadening which is required for laminate floors. Roll out the pre-cut lengths of FILM taking care to locate the "cold tails" on the wall nearest the thermostat connection box. Trim to length as required and insulate trimmed ends as per instructions before taping the element into position. Always take care NOT to overlap the heating elements.