Creality Official 3D Printer Enclosure Fireproof and Dustproof Tent Constant Temperature Protective Cover Storage 480*600*720mm for Ender 3/Ender 3V2/Ender 3S/S1/S1 Pro/Ender 3Pro/Ender 3 Neo/3 V2 Neo

First off - The assembly required gloves with extra grippy palms as the fitting are very tight and require a lot of twisting and pushing to get them fully assembled. There are plenty of complaints about the plastic joints and fiberglass rods but if you use your head and try pushing them together while you twist they make a really solid box. Honestly, complaining that a plastic part broke when using a mallet just demonstrates how bad the education system in America has become, though this example is really common sense not education. Do not take a hammer to plastic, twist and push, twist and push. Once the fight was over the support rods are extremely solid and the shell fits very well. The complaints about the shell not fitting the frame are probably people who did not fully assemble the frame properly. The plastic fitting are very tight, like you want them to be, so if they aren't fully engaged the fit will be off. After that, I discovered this will not fit my BIQU Hurakan printer, that is on me. It does fit my old Monoprice Prusa clone and makes that printer noticeably quieter. I selected this one as it's measurements made me think it was large enough and BIQU does not appear to include the Hurakan's display in their product dimensions, should have measured myself.

Easy to assemble and keeps sawdust off my Ender 3 which sits in a woodshop.

This was a pain to build. It is a very tight fit, the edges ripped in a few spots, the instructions are useless, and due to it being folded the “window” is basically not usable due to the creases. That being said once built it is sturdy. It fully fit my Ender 3 pro with the filament mounted on top. It will not fit with the filament mounted on the side. It also helps keep the heat in. I primarily got it to keep my kids and cats away from it while it was printing and it has preformed great at that. For the price its a buy.

I got this as a temporary solution while I wait for FlashForge to release the acrylic panels for the Adventurer 5M. In the meantime, this is actually quite useful. It keeps my printer protected from cats and children, holds the temperature in if I need it to, and assembles easily. Fits my printer, a Creality filament dryer 2.0, and a few small tools. This is definitely the next best thing to a solid enclosure. I was kind of surprised with how strong the internal frame is. It's made from tough plastic rods. It would probably break immediately if I sat on it or something, but it is more than strong enough to have an adult cat hop on and off of it repeatedly between squirts of water without issue. The material is tough and won't be easily shredded by cats either.

I bought this to use with my ender 3 v2 because the plastic fumes were unbearable for longer prints. I would get headaches from the fumes if I didn't open the window. But if you know anything about 3d printing, you know you don't want cool fresh air running over the print bed. This tent made it possible to run my printer all day without worry of getting sick from the fumes. I paired this tent with an inline vent fan going out my window and I can't smell anything at all and no more headaches! I also added a cheap $5 led strip inside the tent to get a better look while the printer is running. Definitely worth the investment if you print all the time. Just be careful assembling as to not snap the rods. They are a pretty tight fit in the plastic joints, but if you do it correctly and carefully, it's nice and sturdy and you can move it around with no problems.

THE PERFECT CAT BED! haha I have still not used it for its intended purpose as my cats immediately used it as a toy and a great place to sleep as it is tall and hammock-like. haha I am giving this 5 stars on their behalf! I have used one of these before, same one, and it has worked well, I just accidentally destroyed it in a move. This is a great enclosure for ASA parts, and I never have elephants foot or corners peeling while printing!

The instructions are in a foreign language, the frame is cheap. It does not fit in the case. While installing the frame into the case, the case ripped and one of the joints broke. I would stay far away from this enclosure.

I read the reviews after I ordered and noticed multiple people mentioned they broke it while trying to construct the frame. Because of this info I took extra time and care when putting it together, I even used a lubricant to make it easier to push the poles in. I still managed to break on of the plastic connectors when putting it together. I was still able to make it work with some duct tape and once it was fully constructed it looks and works great but I really wish they would make this product easier to construct, or possibly throw in a few extra plastic pieces just in case.

Ive been looking at getting a cover for my ender3 v2 pro for a while and just never bit...but the price was right and my prints kept failing so I gave it a go... amd wow what a difference! Consistent temp. In the enclosure seems to really help

Massively oversized for Ender 3 v2, with nowhere to put the spool. Takes over my entire desk. Super weird orientation. Absolutely not worth it. Sending it back.

Took me 15 minutes to assemble and insert printer. If I can do it at 70 years old then anyone can. Helped alot with quality of print. Fast delivery. Recommend to all serious 3D printing people out there.

Putting this thing together felt like a brain teaser. The rods seemed just a hair too long at first—like the enclosure was daring me to give up. A bit of finagling (and mild frustration) later, I finally got it assembled. Now that it’s up and running, though, I love it. Temperature stays stable, print quality is more consistent, and it keeps dust and drafts out. Bonus: it also makes the printer quieter and a bit less of a visual eyesore in the corner. TL;DR—assembly’s a pain, but once it’s together, it’s solid and totally worth the effort.

Good quality. I have discovered that my printer gets really hot and PLA filament gets soft. If you have an external feed it would be good. I use it with the door open