OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 1kg Filament (2.2lbs), Dimensional Accuracy 99% Probability +/- 0.03 mm, Fit Most FDM Printer (Black (1-Pack))

Een zeer goede kwaliteit met prachtig resultaat.

I used this filament for the first time with my Bambu Lab P1S and I’m genuinely impressed. Right out of the box, the default PETG settings in Bambu Studio worked perfectly. No tweaking, no temperature tower, no flow calibration — just loaded it up and the prints came out clean, strong, and with excellent layer adhesion. The filament flows smoothly with no clogs or stringing. The color is vibrant and rich. The finish has a semi-gloss look that really makes the prints pop. For the price, this is one of the best PETG filaments I’ve used. Highly recommend if you want reliable, great-looking prints without having to fight with settings. Would definitely buy again!

Great filament

So, I’ve tried this item out, and gotta say, it worked pretty well on my printer. The dimensional accuracy is very good, and it printed smooth without much hassle. Just had a few minor issues with sticking, but that’s not a big deal. Overall, I’m satisfied. Overall: I recommend this product. Great quality for the price and reliable.

UPDATED REVIEW: Getting this PETG to print was a real struggle for me but... it ended up eventually working so in all fairness I've upped my review stars and I take credit for this as "user error". What it boiled down to was print speed. I was working with common slicer templates for PETG which print around 50mm/sec and I see other people reporting success at that speed but, it was a total mess for me. I found a few reviews that suggested turning the speed way down so I tried it and it made all the difference. I am working with a new Ender 3 v2 Noe with PEI build plate. Using about 240 nozzle and 80 bed. My esteps are calibrated spot on, and my flow calibrated to about about 88 for this material in my machine and these temps. I turned the main print speed down to 30mm/sec and the initial layers, supports, and walls down to 15mm/sec and it completely changed my printing experience with this material. ***HERE IS MY INITIAL REVIEW BEFORE I DISCOVERED SLOWING DOWN THE PRINT SPEED*** Based on other reviews and pictures, it seems some people have had great results with this filament. My expectations are low, I just wanted decent results as my prints are mostly functional and I am not overly concerned with aesthetics. Unfortunately after hours of testing and tuning I have not achieved a single acceptable result and will likely give up with this Overature PETG. The filament arrived sealed, I have stored it in a vacuum bag and use a heated filament holder when printing. My machine is a new E3v2 Neo with capricorn PTFE tube and a bi-metal heat break. I also print in an enclosure. ZERO luck with this roll of PETG. The pictures show two temp towers, the one on the left I printed with TECBEARS PLA and the one on the right with Overature PETG. Yes, PLA is nice to work with and as you can see, the PLA tower printed clean starting with 215 and 180 on the top; all layers were good with just a little stringing at the top cooler levels. Again, I just hoped for acceptable results with the PETG; I started at 245 on the bottom with 85 bed temp and finished at 215 on the top layer. All levels look terrible. My e-steps are tuned perfect, I did several flow tests printing single and double walled cubes which resulted in overflow and an adjusted flow rate of 88 which resulted in good flow test results on the test cubes but still most all prints fail, I barely got this temp tower shown in my pictures to print and as you can see, it is terrible in all regards. I have done a ton of tests for 1st layer adhesion and z-offset, my bed is super level (I use octoprint to visualize) and I've tried a few z-offset adjustments, no love... My last 1st layer tests turned out good and then I go to print and it wont stick, the filament globs up on the print head and smears around. I absolutely must have a brim, or better yet a raft or my print fails on the first layer. Sure, some folks have had good luck although I've put in the time and a lot of effort and I give up; I cannot get this filament to produce a useable print on my E3v2 Neo. I am not the only one reporting these challenges, maybe Overature has quality control issues with their PETG? Maybe I never found the perfect adjustments but I sure tried and I have to move on now, I can't spend my whole life trying to get a filament to produce "OK" results. ***SEE TOP OF REVIEW FOR UPDATED SUCCESS STORY***