Dracaena.io 360mm Copper PC Radiator for Custom Water Cooling Loop, 28mm Thick, 3x120mm Fan Mount, Dual G1/4 Thread Ports, Liquid Cooling Radiator, White

Excellent seller. Good quality product for affordable price.

No idea how electrical watts translates to heat watts, but a watt is a watt right? If i Run 450 watts through my gpu, this rad has enough area to keep it at 50C or less. Tested by looping Port Royal until equilibrium w/ 2500 rpm be quiet fans. Soaked it for a day in 7% ascetic acid vinegar, only saw a few specks of pepper on flush before install. Packaging is good, no bent fins, comes with lots of screws.

Came with a few dents in the fins

Pro's Quality of the copper and brass is great, It operates as expected for a great price. But this is NOT a radiator for first time builders. With that said all of the below cons are a potential risk for first time builders, and or the unaware. There is nothing inherently wrong with the design, but common mistakes could occur due to finish and design choices. Con's there are some finish issues, the coating on radiator bleeds onto the threads and was sharp enough to damage fittings o-rings (these had to be deburred with a abs plastic scraper DO NOT USE METAL to scrape the thread clean you will damage the threads and cause a leak), second the included screws are not a standard screw that is used in computer cases, so don't confuse them. The small screws are too long, I had to use washers (not included) to take up space otherwise the screws would push through the water jacket and the radiator would leak. Note depending on the fan you pair, you may or may not need to exercise equal caution with the fan mounting. I used Noctua fans which are great, but I have had cooler master fans in the past which its mounting tabs are flexible. If the fan flexes it IS possible that the long screws could contact the water jacket and poke a hole as well. IF the manufacturer were to make a change, a 'shelf' under the screw area to bottom out against would make this a near perfect product. As it is, screws on both sides of the radiator could poke through the water jacket and cause leaks.

Delivery was prompt Radiator is as advertised copper tubes with brass tank caps, paint is solid quality; all of the screw holes were tapped and came with 8 long screws (for mounting the fans) and 8 short screws (for mounting the radiator to the case) Thread was G1/4 held .75 Bar for 24 hours