VEVOR Spray Paint Pressure Pot Tank, 10L/2.5gal Air Paint Pressure Pot, 1.5mm+4mm Two Nozzles Two Spray Paint Guns for Industry Home Decor Architecture Construction Automotive Painting, 60PSI Max

Pretty good paint gun. Used for spraying black polyurethane top coat on epoxy primer for steel deck. Got job done faster than using my other hvlp gun with gravity bowl. It may have leaked some from a fitting. I Shortened the lines to about 3 ft so they wouldn't get in way or drag much Prepare to use more cleaning solvent after use.

I needed one of these for staying some shutters. Ended up spraying half the body of the house with it, it’s kind of cheap in the lines and the fittings but did the job nicely and sprayed well , much much better than my expectation. I have a very expensive airless mark IV and I used this for its simplicity and never touched my $4009 sprayer the whole job. But it suited my needs your needs may be differnt. I sprayed Kate. Through it too and it did well which to me is tougher then many oil Or other products to spray and get good results

I bought this for my resin work, so I needed to cap the two unused ports. FIP fittings worked, but using Teflon tape caused a small leak of about 0.5 psi per hour. I ended up using the included red bottom gel, which seal permanently, and those solved the issue completely.With the proper caps installed, the tank holds 30 psi for two hours with no pressure loss. Since I only need 20 psi for resin, this is more than enough. I’m pleased with the performance overall, and now that I plan to keep it, I’ll need to trim down the internal paint tube.

I made a big mistake in purchasing this spray gun system. The paint/air canister can only be pressurized to 50psi so will only spray for about a minute. Customer service gave me a big run-a-round for over a week and then told me to connect a compressor while using the sprayer. I can do that with the spray gun I have. When I pushed back on compressor connection they the asked me to send a video . . . ? ? ? Lots of favorable reviews . . . I doubt that they are real. All the components are well made and good quality . . . . . the problem is that it doesn't do what is advertised.

Review: So far, this VEVOR spray paint pressure pot has been performing very well. I’ve used it a couple of times, and it’s been consistent with no issues during operation. The build quality feels solid, and the tank, fittings, and guns all appear well-made. Durability & Reliability: The tank construction is sturdy, and the included spray guns feel reliable with no leaks or clogging. The nozzles provide good coverage and even spray, which is important for both small and larger projects. Ease of Setup & Use: Setup was fairly straightforward, and the dual nozzles make it versatile for different applications. The pressure adjustment works smoothly, and the system maintains steady pressure during use. Overall Quality & Value: While the price may feel a little high, it’s actually reasonable compared to similar systems on the market. For what you get — a 10L pressure pot, two spray guns, multiple nozzles, and accessories — it’s a solid buy that should last with proper care. Q&A Q: How durable is the pressure pot tank? A: The construction feels sturdy, and the fittings and seals hold pressure well during use. Q: Is it easy to set up and start painting? A: Yes, setup is straightforward, and the included nozzles and guns connect without hassle. Q: Is it worth the price? A: While a bit high, the price is fair compared to similar products, especially since it comes with two spray guns and multiple nozzle options.

This I was a little nervous about after reading some reviews with air leaks. I filled it up to 60lb works great held air overnight no issues. Love it gonna buy 2 more.

It does the job. I like how there’s no weight essentially since it’s all in the canister. For people who can’t hold up a gun with the weight of the paint then this is a good option. That’s about all the good points. The cons: Gun sucks. The knobs/controls didn’t do anything no matter which way I twisted it The material the canister is made out of is strange. Feels like metal but at the same time not. The canister is not that easy to clean out. I put a thicker plastic liner in it but the tube/pressure would end up punching a hole through it Couldn’t get the regulator to work Just felt cheap in general but I guess you get what you pay for

I have’nt been able to use it yet, but it is exactly what I was looking for, the prize was fair compared to other’s that I had searched for so was the fast shipment

Super contents de notre achat. Vraiment rapide et facile. Très efficace. Durée des travaux diminué x10 minimum

Super

Para pintar autos y casa

Je l’adore !! Les hausse qui vien avec était courte j’ai mit hausse de 20 pieds c’est parfait !!

Très bien