Keeney 400PVCK 1-1/2-Inch by 1-1/2-Inch PVC P-Trap with Marvel Connector for 1-1/2-Inch Schedule 40 Connection, White

Just as described and worked great. I'm a big fan of the rubber seals. This is my first time using them so can't say if they will last indefinitely like as the plastic ones but they feel much nicer in use. Honestly the old standard plastic seals never gave me any trouble as far as leaks or anything. But even when everything was together and tightened up you could shift the pipes around a little bit and feel the seals slipping in the joints. Like I said, never had any trouble with leaks from them but they just never really seemed that nice or instilled much confidence till you watched them for a few days and made sure nothing was dripping or needed a little extra tightening. With these rubber washers everything really feels nice and snug. You get everything together and give the pipes a little wiggle and everything feels tight. You can feel a little flex in the seals but you can feel its gripping onto the pipe. I don't know, they just feel like a step up quality-wise to me. I hope this TPR rubber keeps it's elastomeric properties and doesn't dry out on me. Also I like that this assembly is PVC rather than polypropylene which it seems like everything is switching to. The PP stuff just feels a little too flimsy and flexible for slip joints and tailpipe joints for my taste and I imagine it would only get more flexible with some hot water going down the pipes. Seems likely to deform or something. Just me, I prefer the more rigid feel of PVC and it's already earned my trust over the years.

as described. good quality.

I think we've all been there, you go to The Home Depot, snag the 1-1/2 or 1-1/4 inch kit, expect greatness and then be let down by their junk seals they use. I tried to use a 20 Gauge chrome kit, but leaks formed near the slip joint nut and threw in the towel after trying to get it to work for an hour or so. I've ordered this kit twice, it's solid and feels of good quality. I think it's proper schedule 40, which is just icing on the cake. The seals are fantastic, rubberized vinyl (maybe?). It contains a reducer washer, which worked great when transitioning from a 1-1/4 tail piece into a 1-1/2 extension tube (not in the kit) and from there into the P-trap assembly. You'll need to pickup the 6" extension tube, which is sold separately to get the setup pictured. Happy DIY'ing.

This was for a p-trap swap out in a bathroom. Product is as specified. Would recommend

The thing I like best about this P-trap is the fact that EVERY connection point has a rubber washer. The P-traps they sell at home depot are a plastic-to-plastic connection where the trap meets the arm, and I never know with those if I tightened it enough until I do a water test. With this one I don't have to worry about that since the washer ensures a watertight seal even if I don't tighten it like the hulk on steroids.