VEVOR Welding Cart, 3-Tier Welder Cart Heavy Duty with 400 Lbs Weight Capacity, 360° Swivel Wheels, Tank Storage Safety Chains, Rolling MIG Welder Cart for TIG, ARC, MMA, Plasma Cutter Welding Machine

A good sturdy cart for the money. Assembly instructions are not great, but if you read through it before you start, you'll save a lot of time with taking bolts back out after they are put in and tightened. The drawers and locking compartment are nice. Paint seems to be good and thick. Holds my MIG welder and tank nicely.

Nice little Vevor 2-Tier 4 Drawer Welding Cart. It's a little small for my multi-process welder, but when I route the leads under the handle, it works just fine for the money spent. The 4 drawers are great for storing some consumables and a few items. There is also room behind the drawers to store my extra leads that aren't being used at the time. It has several hangers that are nice for hanging a helmet, power cords and leads. Super easy to put together, only took about 10 minutes. Rolls nicely and decent quality steel for the money.

This cart features two drawers, one with fixed dividers for small items, a larger drawer for larger loose items, and a "lockable" space for items like a helmet and clothing. The large rear wheels and decently-sized front casters that swivel 360⁰ allow the cart to maneuver around the shop floor and not get stuck on small bits that might be in the way. The top shelf easily holds a 200+ amp welder and a second shelf below it provides quickly accessed storage for commonly used tools, electrodes. Four sturdy hooks offer plenty of easy access for multiprocess welder guns and torches. While the large storage compartment is lockable, it uses external hinges that are held in place with small bolts that can be removed with a screwdriver, and the hinges are plastic. I wouldn't use it to securely store something without replacing the hinges and perhaps the keylock; it's fine, otherwise. 4 stars because of this. The cart ships well-packaged and arrived undamaged. There were no build issues assembling it, the instructions are clear, and the fit and finish had no issues. Assembly took under two hours, including unpacking and not rushing through the process. Vevor included extra bolts, washers, and nuts which was reassuring. Would recommend for DIY and light duty shops on a budget. This cart should easily last a generation. Well done, Vevor!

Easy to assemble and good space for medium sized mig. Wheels are smooth (on flat shop floor/ concrete) and the ergonomics are nice (good height for the handle). Fits my Forney mig, helmet, gloves (two pair) , and a lot more.

Assembly took a bit... Technically it fits my miller 140, Now... HOWEVER... When assembled per instructions, (which were clear and easy). The bolts facing the inside on the top shelf made it so the base of the welder did not fit, they took about 3/4" total (3/8 per side) of the described width so I reversed them. Also the handel was in the way. See pictures... hence the side door of the welder would not open. After reversing the top bolts the base fit in the slot, but the sides of the shelf were also too tall for the side door of the welder to open. End result is I put a 5/8 thick board under it and relocated the handel and bolts and all is good. Seems like a sturdy cart.

Wanted a flat top tray. Picture on one I purchased showed a flat top tray. Instructions didn't reflect that and were lacking. Was able to install flat. Top drawer catches and had to be ground down. Works ok but poor quality, but way less expensive than some models.

Arrived well packaged and undamaged. Very pleased with this cart. Easy to assemble sturdy metal gave me a nice cart to hold my welder and all accessories. The only comment I have that could improve this cart is to have some type of drawer hold when the drawers are closed. If the cart is at a slight angle and the cart is bumped the drawer slides open. I do have a lot of weight in the draw though. The finish is also nicely done.

I liked the amount of enclosed storage on this welding cart, so I took a chance even though it didn’t have reviews yet. The cart itself is a bit more solid than I expected it to be, and the amount of storage is GREAT! If this held a second tank, it would have been perfect for what I was looking for (without breaking the bank). It’s a flat-pack as most things are these days, and took me a while to assemble. There are a few negative things to note. 1-The wheels & casters are probably the lowest quality items of this cart. Will they support the advertised 350lbs? I don’t know, maybe. 2-The bolts are all Phillips heads. Tightening a nut of a Phillips bolt is not the most fun. Hex bolts would have been better imo. 3-If you want the top shelf to slant like the stock photos show, the front bolt holes don’t line up. If you aren’t prepared to drill your own hole, you’ll have to mount the top shelf level. 4-The build order is not the most well thought out. The worst is, they have you add the lower tank bracket at the end after the cabinet is basically fully assembled. I have long arms, so I could still reach around, but that lower tank bracket (not upper) could go on as step 1 and save effort. 5-Not a big negative, but there are no janky tools for you to use while for assembly, so you’ll need a #2 Phillips (& #3 is helpful if you have one), & 10mm socket or wrench (& 7mm for door hinge hardware but is not 100% necessary). The instructions also don’t tell you what tools you’ll need. I’m assuming if you are buying a welding cart, you will at least have basic tools ;) For under 140 bucks, I’m satisfied and I’d buy it over again. If the price climbs too much higher though, I’d probably look elsewhere.

Stadig och bra svetsvagn. Lite otydlig bruksanvisning men inga problem att sätta ihop den.

A good cart would recommend it

Nice solid cart for the price

Top

Puntos positivos: - material adequado y bién acabado - manual de instrucciones claro, con buenas ilustraciones - los cajones són muy útiles Puntos negativos: - viene desmontado - el cajón superior no encaja bin, entra con mucha dificultad. A mi se me saltó los rodamientos - las ruedas bién para un taller, però senzillas si se ha de utilizar sobre tierra. En resumen, buena compra y buena relación calidad-precio, pero reberia mejorar el ajuste y montaje de los cajones.