LED Rear Bumper Fog Light Brake Tail Sequential Flash Turn Signal Lamp Compatible with Honda Civic Sedan LX Sport EX Touring Si 2022 2023 Plug and play Accessories
Details
- BrandKEEGTBOX
- ColorRed
- Specific Uses For ProductRear Lights
- Vehicle Service TypeCar
- Year2023
- Special FeatureWaterproof
Description
🚗 Light Up Your Ride with Style!
- BUILT TO LAST - With a lifespan of over 60,000 hours, these lights are designed for durability.
- EASY INSTALLATION - No tools required—just plug and play for a hassle-free upgrade.
- STAY SAFE STAY SEEN - Sequential flash signals ensure you're noticed when turning.
- ILLUMINATE YOUR DRIVE - Experience enhanced visibility with 50% brightness for tail lights and 100% for brakes.
- WEATHER READY PERFORMANCE - IP67 rated for waterproof, shockproof, and dustproof reliability.
The KEEGTBOX LED Rear Bumper Fog Light is a cutting-edge lighting solution designed specifically for the 2022-2023 Honda Civic Sedan models. This plug-and-play accessory enhances safety with dynamic turn signals and high-visibility brake lights, all while boasting an impressive lifespan and robust waterproof features.
Specifications
| Brand | KEEGTBOX |
| Color | Red |
| Specific Uses For Product | Rear Lights |
| Vehicle Service Type | Car |
| Year | 2023 |
| Special Feature | Waterproof |
| Wattage | 5 watts |
| Auto Part Position | Rear |
| Lens Color | Red |
| Lens Material | Polycarbonate |
| Assembly Required | No |
| Manufacturer | KEEGTBOX |
| Model | Rear Bumper Light |
| Item Weight | 16 ounces |
| Package Dimensions | 12 x 3 x 3 inches |
| Country of Origin | China |
| Item model number | Civic Rear Light01 |
| Exterior | Chrome |
| Manufacturer Part Number | Civic Rera Light001 |
| Special Features | Waterproof |
Reviews
5**E
Looks Fantastic!!
These lights look and work great!! Fairly easy to put in pull the back lights run wire thru the grommets plug and play. Follow color code white goes to hreen in the plug
L**
bumper lights
It was easy to fix and it looks good on the car. The light is very bright as well
T**M
Unplug the battery first
I’m going to try my best to give instructions since none were included. This is easily the most frustrating part of this product. It works and looks great. I ended up crossing a wire somehow and blew the STOP fuse (10A under hood), which made the car unable to start and a while to figure out. Totally my fault, but could have been avoided with instructions.Tools required:Body removal toolMasking tapeElectrical tape or shrink fitPhilips screwdriver5’ of string (optional)Drill bit or wood screwFlashlight10mm wrench/socketBefore you begin. Unplug the battery. 10mm wrench/socket needed.Instructions:1. Pop Trunk2. Remove tail light. (Pop off cover beside with removal tool and take the 2 Philips screws out. Then pull and wiggle light towards back corner of car. It has 2 pop fittings that will come loose).3. Get under car and pull out old reflector. (I was able to reach with my hands and do it. You may need the removal tool to get them if they’re stiff.)4. Line up new marker light in hole and mark the drill location.5. Drill 1/4” hole. I used a wood screw and poked the screwdriver through to make it bigger.6. Install the markers, but don’t clip on place yet.7. Use masking tape to tape the wires together at the end. Run them through the drilled hole and the little opening up towards the tail light. I used a string. Dropped it down through the hole and taped the wires to it and pulled it back through.7. Plug the included black plastic male small clip onto the female tip of the wire harness.8. Match the wire colors and stick the metal ends in the holes of the male clip. Black, yellow, red, and green are on the car. Match the BYR and plug the white one to the green.9. Unplug the tail light harness clips and plug in the marker harness to the tail light. It’s pretty self-explanatory. Secure all connections with tape or shrink fit to waterproof it.10. Secure the extra wire with zip tie or tape. Drop it back down the hole.11. Test all systems, including starting the car.12. If all is good, clip into place and remove protective film.13. Reinstall tail light. Clip, screws, cover.5 star product. 0 stars for installation. I hope this helps others.
J**Z
Amazing
Easy to install didn’t have to remove bumper installed alone in 20 mins nice bright and looks way better then the reflectors
D**N
Easy install
Easier install than it was stated online. Do not remove the bumper it's not necessary.
V**E
Perfect
Love them. Fit perfect. Work Perfect. Wiring takes a while to figure out.
C**N
Easy install.
2024 Civic Si - did not have to remove bumper. Hardest part was getting the OEM clips off.
W**L
?
SE VE MUY BIEN LO SSTOY MONTANDO HOY PERO LA SECUENCIA DE LOS CABLES SE ME HA ECHO DIFÍCIL? Quien me ayuda por favor
Common Questions
Trustpilot
1 month ago
2 months ago
