20x8.00-8 Rear Tire & Wheel Assembly

Bought as a replacement for my Cub Cadet 60" zero turn model 53AH8STD050. These come with two sizes of bearings. Mine used the 3/4 bearings that were already installed in the wheels. You will reuse the 6" long center tube from your old wheels. I had to use all of the spacers to center the wheels, actually could use a little more. I may go back with a few washers. Quality seems good and the ride at my place was already rough. I mowed 3 acres with them and they are doing ok. The smooth tires don't tear the grass. Any changes and I'll update. I recommend these.

A perfect fit for my Kubota ZD28 zero turn mower's front tire. I had to add a couple of spacers and washers to keep the tire centered on the spindle, but other than that, it fit perfectly. Tires seem to be of good quality and the value cannot be beat!

I bought these to replace the wheels and tires on my old John Deere #5 dump cart. These fit perfectly on the axles however, they are little bit wider than the original tires and just barely rubbed on the cart, I just added a shim (washer) on the axle behind them and no more rubbing. They are great and grip pretty well on a side hill. Have had the max cart weight (580lbs) on them dozens of times hauling gravel and retaining wall block and they are still like brand new.

If they are rubber, they may be the hardest rubber on planet Earth. These will make your ride a bit rougher up front, BUT to me well worth it, with not having to worry ever again about flats. Had to make spacers out of half inch schedule 40 pvc for each side of the wheel axles. I probably ordered the wrong ones lol. Anyway, No weight bearing, so they work fine.

I bought these 20 X 8.0 - 8 tires and wheels to replace the rear tires and wheels on my John Deere Sabre 1538HS riding lawn mower. The tires and wheels appear to be a good quality product. According to the description, these wheels have an offset, 3 1/2 inch long hub with a 3/4 inch diameter hole and a 3/16 inch keyway. This is correct, however it would be helpful to provide how much the offset is. These wheels were offset 1/2 inch more than my original wheels. In my case, this was not a problem. This made the center-line of the new tires a 1/2 inch farther out from the lawnmower, but it didn't cause any interference with the fenders.I've seen other reviewers say that these new tires were bigger than their old tires. This was true in my case as well. But these tires measure 20 inches in diameter as described. My old tires were marked 20 X 8.0 - 8, but in actuality they measured only 18 inches in diameter. However in my case, these new tires fit under the fenders with room to spare.The only problem I had was a minor issue. There was a little bit of yellow paint in the hole and keyway. Once I cleaned the paint out, the wheels went on the mower easily.Overall, I am very pleased with these new tires and wheels and they are working great for me.

But rims tires on never used mower yet came out to cut grass tire flat filled with air came out next day tire flat must be hole in tube tire looks fine an they just want me send back for refund never got refund for another item I ordered so don't recommend this purchase

Fit perfectly on LA120 John Deere mower. Arrived on time as promised. No issues installing. Well worth the money

These tires appear to be well made ,but they are NOT 13” tires.The tire is a solid 12” with a flat tread. If you look at the photo comparison of a 13” tire, you will quickly see the difference.You will need to adjust the vertical shimming of your mower deck, if not replacing as a set.The tires do come with a full set of spacers for side to side centering of the wheel in the yoke, which is good.Will see how they last compared to the others, who have weak hubs and bearings.

Narrower than the original tires but I knew that when I ordered them. I needed the wheels as well so I bought these and they fit perfectly

Fit my John Deere la135 tractor perfectly

The kit came with multiple bushings to adapt it to multiple axles. It also has a grease fitting which allows the owner o grease the axles without removing the wheel. Literally a 5 minuite change from old tires to new ones. No more flats. If you use these on concrete or asphalt you willNotice that they are stiffer than rubber tires. But on the lawn not noticeable. Great value and really happy with the purchase.

They worked

Product used for xmark zero turn lawn tractor.