Electric Hydraulic Pump, 10000 PSI 750W 110V, 488 in³/8L Capacity, Single Acting Manual Valve, Electric Driven Hydraulic Pump Power Pack Unit with Lever Switch for Punching/Bending/Jack Machines

This was perfect for my application , ridge pipe bender. It was VERY reasonabley priced. Only one complaint the two hoses that I received would not go together as they were both male . I would definitely recommend this product (so far) as I've only used it twice.

Get serious work done periodically. Not built for professional (every day) abuse. But best value for homeowners.

Using this manual valve double acting unit on a 30 ton cylinder in a press. It moves the cylinder at a decent speed and then slows to the high pressure stage which is considerably slower. It will go over 10,000 psi. The info on how it operates wasn't stated. The lever has three positions. Pressure port 1, pressure port 2 and then center. In center it relieves the pressure so you can't do a stopped position on a cylinder if it has weight on it unless you leave the lever on a port position and turn the pump off. There is actually a very fine line between the port and center position you can put the lever in to hold position with the pump running but it isn't designed for this. I did have some trouble initially getting the pump to prime. I should have left the hoses off and ran a bit of oil out first. No issues since though.

Terrible item with bad packaging. Splintered wood and a nail sticking out which punctured my hand causing bleeding. Hose and black stage of unit leaked oil everywhere. I regret purchasing this and it was extremely difficult to return because it’s heavy and the packaging was damaged.

3.5 stars would be the rating if that option was available. I bought this to use on my motorcycle table lift instead of air. The pump itself works well. It is a heavy unit and operates quietly. The supplied hoses are lacking, one hose had bad threads on the female end. The second was better but be aware that they are NOT swivel ends. I was informed that it was 2-3 weeks out on shipping, then it arrived UPS while the listed status was that it hadnt shipped. That's great unless you arent home for a few days The fill port is adequate if you use a long funnel (it take 2 gallons) but could be bigger. You may need a 3" nipple to connect your fittings as the connection port sits close to and on top of the tank. A design flaw in my opinion. The pressure guage is easily readable. It was packaged well in a sturdy wooden crate.

Emede Electric manufacture heavy duty Electro rooms and lifting, moving, transporting these units is always a challenge because each section weight more tan 30 Ton. But we built an hydraulic system using two VEVOR Electric Hydraulic Pump, 10000 PSI 750W 110V 488 in³/8L Capacity, Single Acting Solenoid Valve to which we connected two VEVOR Hydraulic cylinder of 50 Ton 6” to each pump via a 11gpm Hydraulic Directional Control Valve, Double Acting 2 Spool Hydraulic Joystick Control Valve for Tractors Loaders Tanks by VEVOR. We have successfully operated the system many times now. We are very happy with the result and we invested very little money.

Was impressed with the packing and the only issue with set up was getting the system to bleed on the first start up. that was fairly easily solved by doing multiple start and stops. after the 4th start stop the fluid started flowing and has worked perfectly since. I do wish it had a built in return line as Im currently using the fill port to return fluid

It works as defined. It took a lot to get the pump primed but after a few days of stop start stop start wait stop start, think of returning then test again…it decided to perform. Definitely worth the trouble and time to get it functioning.