Five Display Air Suspension Gauge Air Ride Air Pressure Gauge 2Inch 0-290 PSI with 5Pcs 1/8NPT Sensors

Purchased for my airride and was delighted to find a gauge that does it all. Simple clean and easy to install. Has all four bag pressures and my tank pressure in one gauge. Brilliant

Bought new and doesn't work at all. Checked all connections and still no power what so ever.

This gauge out of the box is very sharp and easy to install. Very happy with seller and fast shipping.

Set this up on a bench with a pressurized pvc like most sensors they get more and less accurate the closer you get to there spectrum ends but id say i never say much more then a 2psi difference and honestly that could be negligible i plan to use this in the intended application in the long run and for sensors alone its a good deal.

Two air pressure senders didn’t work out of the box. Both show 232 psi when on the bench.

This gauge is super easy if you have an airbag system or need to measure 5 pressure inputs. The gauge itself is about 2 inches but super thin, maybe .5 inches deep which opens up installation options. you don’t need a lot of depth and could even be surface mounted with a little fabrication.Item didnt come with any documentation. There is a button on the front that may do things other than on-off, who knows? Would also be nice to have a pin out of the connector to help understand which sensors go with which readouts on the display. You’ll have to try them all by trial and error.Comes with 5 stainless pressure sensors. All seem to be working fine and of reasonable accuracy for an air bag set up. If your bags are really low pressure you may want to go with different sensors since these are 220 PSI and the resolution isn’t enough to accurately measure the lower pressures.At this price it’s a good value