AggAuto Universal 170"x40" Car Grill Mesh - Aluminum Alloy Automotive Grille Insert Bumper Rhombic Hole 3x6mm, One of the Most Multifunctional Shape Grids Silver

Very nice, stiff protective screening for my radiator, oil cooler and air conditioning cooler. People on the Santa Cruz forum were complaining that when a rock hit any of the above it was a $1,800 replacement cost that was not covered under warranty. So at the recommendation of others I got 2 sheets of this in the 4x8 rhombic size. I didn't install it like others, zip tying it either on the outside or the inside of the grill like so many others. I'm not doing that to $40,000 new car! I watched a YouTube video on how to take the front end with installed grills off my car. being very careful it took me 45 minutes and the whole front end was laying on the grass in front of the car. It was then very easy, with regular scissors, to cut the screening to fit the back side of the grill. I left tabs on the screen where I saw screws on the back side that held grill in place. I then back the screws out one by one and screed them back in first through the screen tab then back in the hole holding the grill in place. That held the screening in place against the back of the grill. Start to finish, in my driveway, It took me 4 hours, which was well worth it, to get a factory looking job. The tools I used to do this were a small flathead screwdriver for the plastic pop fasteners, a 10 mm socket for the eight bolts, a pair of scissors for cutting the screen and a Phillips head screwdriver for attaching it to the existing screws holding the grill in place. I did have some concern when I finished because it looked so beautifully black with very little silver aluminum radiator showing, that maybe too much of the airflow would be blocked by the screening... I can tell you that this is absolutely NOT the case! We've had heat indexes over 105 degrees the last few days and I've driven the car around town, on the highway and sat in it parked on a blacktop parking lot with the air conditioning running for over an hour and the engine temperature gauge is exactly where it has always been, just a hair under mid-range. I have not seen the slightest change!

Took two rolls to do my Santa Cruz but works great I’ve had it on ther for about 5 months now and still holding up great

This mesh is stiff but still malleable enough to shape exactly how you need it. Cuts clean, bends without fighting you, and once it’s in place it stays put. The red color looks great in person too — bright without looking cheap. Verdict: Solid material, easy to work with, and the color pops.

It’s rather thick aluminum mesh. It’ll work great to keep bugs/debris off my radiator/intercooler/oil cooler. It’s pretty easy to trim or cut with an angle grinder or heavy duty scissors. My only complaint it that it’s pretty stiff and is a bit difficult to reshape though that may be a benefit to help it stay in place once it’s on. It looks really good and it being aluminum makes it a good upgrade over plastic grilles. Fit is dependent on how good you are at trimming it. Securing it requires creativity as no hardware is included at all, I personally drilled small holes in my bumper and used small black zip ties and it’s holding perfectly.

Used to make a grill and it looks great. It was a huge sheet of metal and was easy to bend.. once or twice then it breaks.

Good material. Easy to work with and worth the price.

I saw a couple other reviews saying it cracks if youre not careful. It arrived in the mail tightly rolled, so I patiently unraveled it. Its aluminum, so it will unravel -- just do it slowly. (it will crack if it is over manipulated) I cut it to size with tin snips. I secured it to my front lower grill from SWA autosports using 1.8mm black zip ties (Shout out to that one review! the holes are so tiny, no other zip ties fit!). Looks fantastic. Cant wait to mount it to the car!

It is a nice product for the price, but it cannot be completely flat to install in a car.

Très bon produit très résistent

Gekauft fürs Wohnmobil als Steinschlagschutzgitter für den Kühler. Das Gitter ist stabil genug, um Steinschlag abzuhalten und flexibel genug, um es gut zu verarbeiten. Perfekt! Würde ich wieder kaufen

If you want a flat finish you won’t get it, all wavy and that makes it very cheap looking. Finish of several spots is not perfect from the press. Very expensive for what you get and if a show car don’t bother.

Ha sido un acierto decantarme por este material. Cierto que al venir en un rollo, es algo dificil de dejarlo plano, pero con calma se logra. Y lo importante, es que es de material inoxidable.

Bra produkt som fungerar som förväntat