Perlegear Universal Swivel TV Stand Base for 32–70 inch TVs, Height Adjustable Table Top TV Stand Mount with Tilt, Tempered Glass Base, Holds up to 88 lbs

Got this for a 65" LCD TV and it's a fantastic stand. So nice to be able to swivel the TV and it turns with the lightest touch while staying exactly where you put it. It also looks great, and is so great to be able to put it on furniture that has a small footprint, rather than something that can accommodate the very wide stance that TV feet have today. The stand is also very sturdy and the locks are handy to lock it in place on the frame. Plus if you want to hang it on the wall down the road instead, you can reconfigure it for that purpose. The only issue I had when assembling, is the short 4 screws supplied to attach the plate to the top of the stand. The plate has a bracket that is made to slide on to the top of the stand (over the holes that have a silver ring). So the screws go through the bracket holes and into the stand holes. Only they weren't long enough to be able to reach the threads in the silver-ringed holes. Because those holes (in the top of the stand) have a short neck before the threads start, and the bracket did not hug the top of the stand close enough... so the distance was too far for the very short screws to catch the threads. If I got one side in, I couldn't get the other... and if I put one screw in on one side, I couldn't get a screw in on the other (even without tightening it down). I could have tried taking the bracket off and bending it in some, but aside form it being very thick steel, I did not feel comfortable having those very short screws securing the very part of the stand that was going to be supporting the entire weight of the TV. So used 4 screws of the same size (but longer) that were VESA screws that also came with the kit, that I did not need for my TV, as mine used one of the larger sets. And the VESA screws were handier anyway because they were phillips heads. They are silver instead of black (the designated screws are black to match the stand mast) but you don't see them anyway and I felt much better using those! And since the stand is hollow, the longer length didn't matter, except it' made it super easy to attach the bracket and much more secure IYAM. On this point, in the manual it says (gist) if you want to tilt it and it's not budging, to slightly loosen two of these screws... another reason longer screws are better. (I don't need tilt but mentioned that because it's relevant here.) You don't want to back out a short screw that's only catching a few threads anyway, and potentially have it fall out... but won't have that concern with the longer screws. So I would buy it again in a second (but would personally do the VESA screw swap regardless). But did not take a star off because the stand is so very nice and the screws I needed were included, even if not intended for that purpose. And maybe most brackets hug the mast better so the short screws might work for most people and they won't know the difference.

Works as intended, secure, fit and finish is great, very stable, instructions are easy to read

Great product. Solid base with rotational capabilities. Really happy with the quality and ease of use.

The title says it all. Easy to assemble, and works like a charm. Product far exceeds expectations. We have a 55 inch HDTV, and there is zero wobble, or concerns about stability. Would purchase again in a heartbeat.

This arrived, packaged well. Item is exactly as illustrated. This kit included screws for every possible TV. One thing I wanted to mention, the screws that are meant to connect the bottom stand to the tall bracket - the screws included and noted in the instructions did not fit. I had to select a different set of screws that were longer - but because they were not sized properly, the screw head sticks out underneath. Before I had placed the pads on, I placed it on my bureau. Sadly, after moving it - I ruined my bureau and put very large tracks into it. Was a very sad moment - but I just didn't realize the issue until it was too late. I will also say that putting it together was a little frustrating - specifically for that one part I just mentioned - it wasn't easy with one person - but other than that, I'd say it's pretty simple to put together. It's heavy duty and seems well made. Oh, one other area of confusion, it comes with safety screws to ensure your TV doesn't fall off, because it's essentially rest on the brackets - opposed to the stand being affixed to the tv via the VESA mount like some others I've used in the past. However; there's no way to install the safety screws - I'm not sure if the intention there is to drill holes into your TV, but I didn't like that. Last thing to note, if you're looking for a lot of swivel - it doesn't swivel much. I had to kitty corner the stand on my bureau to allow me to swivel it at the angle I needed. I also haven't figured out how to adjust it so it can tilt up / down - I'm sure it's pretty easy - but honestly, I don't really need to do it - so no biggie.

So I've had this for a while now and I would very much recommend. My cat (fat) jumped on top of my T.V. and knocked it off it's stand and while the T.V. was fine the original base shattered so after some shopping and comparing I went with this one as a replacement. It's better than the original. Taller, sturdier and more stable (fatty hasn't been able to topple this one yet and she's tried). Easy to set up and durable. Would recommend 10/10.

You know it worked. You know the tv is like 65”. And it is steady. You know tho we have a 27 lb cat. And that cat could still decide to jump up on one side and might mess up it working. So we’re definitely not using it. But if you don’t have a cat or a toddler that might reach one side of the tv n Still Try and hang on it. IT will WORK and IT it absolutely GORGEOUS. Well made. Easy To Put together and put on a Omni fire Tv and WE Do Love it So I’m trying to decide if I can use it on the guest room dresser and if the Omni tv goes back on sale Again or if after a year our tv continues too be So Impressive we WILL use it in a Secured from =^..^= And Toddlers ROOM!

Fast delivery, easy clear instuctions and easy assembly. All fasteners are clearly marked and bagged seperatly. You receive many more parts than are required so you can use it with different model tv's. Very solid construction and everything lines up perfectly for assembly. I used it for a 65" LG and I am very confident it will not be knocked over . The swivel and tilt are a great feature. Good product I would buy again.

Buen producto, aunque DEFINITIVAMENTE me habría gustado que pudiera levantar más el aparato de TV, y que se mencionase esta característica en la Descripción del producto

Excelente, he montado una TV de 55 pulgadas a 40cm sobre una credenza y la base es muy estable. Buena compra