








🔐 Reinforce your fortress in minutes — because your door deserves armor, not excuses.
The Armor Concepts 9480096 FAJ-EXT-20000RP is a 40-inch long, 18-gauge alloy steel exterior door jamb repair set designed for quick, no-cut, no-nail DIY installation. Police-tested and recommended, it withstands common forced entry methods and integrates seamlessly with other Armor Concepts security products. Ideal for millennial homeowners seeking cost-effective, professional-grade door reinforcement with minimal effort.







| ASIN | B004YK6QOG |
| Assembly Required | Yes |
| Brand | Armor Concepts |
| Colour | White |
| Generic Name | Fix A Jamb |
| Global Trade Identification Number | 00850794001338 |
| Included Components | Hardware;Door Knobs & Lock Sets;door-lock-replacement-parts |
| Item Dimensions LxWxH | 46 x 3 x 1016 Millimeters |
| Item Weight | 907 g |
| Item model number | FAJ-EXT-20000RP |
| Manufacturer | ARMOR CONCEPTS |
| Material | Alloy Steel |
| Product Dimensions | 4.57 x 0.25 x 101.6 cm; 907.18 g |
| Style | Modern |
| UPC | 850794001338 733353863892 |
G**T
Easy to install and greatly strengths door locking capability. Good size, quality, and fit. Good value for the money.
M**4
Had someone try and kickdown the door...it damaged the frame, so this item was a way to "fix" the frame and add additional reinforcement. The good, for $69, it's cheap insurance, and less than an hour to install. The bad, the screws are too thin, which will make getting the last 1/4" or so in without sheering off the head. Hint: If you have a crayon, put some of it into the predrilled hole, and the wax will reduce the friction just enough to help get the last length of the screw flush. I am going to buy another for the door that accesses the garage.
D**S
Worked as described. Easy to install. Much better than replacing the whole jamb! Just wish it was a little nicer looking...
A**R
This is a great and very simple to install product. I had to cave man my door due to accidentally being locked out. This not only covered all the damage but re-enforced at a level beyond what it used to be. I may still be able to kick it in but it would take a lot of effort. The only con, and it's mentioned in other reviews is the bit that they give you for screws. Yes, it does fit correctly, however the screws are coated (which is a good thing to prevent rust). But the coating overlaps the head of the screw and is in the inlet for the bit causing it to fit incorrectly. Chisel that little bit of coating out and then screw your screw in and you will not have any problems. It also recommends and 11/64" pilot hole. I used 7/64" and had no problems at all. Highly recommend.
J**N
One draw back, the driver tip provided broke after installing the second screw. I used an oscillating tool on the existing trim to add a grove/slot so I did not need to remove the trim and the holes matched the locks. Predrill for the screws. Finally I added a tiny bit if caulk for looks. Of course vacuum and general clean up. Your done! Just a note: If someone READY wants in, They will get in. They'll just find another way. Why make it easy?
Trustpilot
2 weeks ago
1 month ago