Engine Motor Mount Compatible with 2004-2008 Solara 2.4L 2002-2006 Camry 2.4L Auto Transmission, Replace OE A4203 A4204 A4207 A4211, Set of 4

Due to winter rust, I needed to replace two front mounts but ended up replacing all 4. They all fit nicely and seemed to be high quality. One tricky part was getting the transmission bracket seated onto the new mount that bolts to the transmission (front passenger side). In hindsight, I would recommend you remove the transmission mount from the car with the bracket still attached. There is just (barely) enough room for you to do this after removing the 3, 14mm bolts from the transmission (see pic) and the 3 bottom bolts from the mount. Then you can take the bracket off, see how it is seated, and put the new one on. I couldn’t even hammer the bracket on the new mount but was able to seat it after aligning it perfectly and then use an impact wrench to drive it on. If you look at the old bracket, the size is right and it’s supposed to be snug. With the bracket in place, you can then install it with just enough room back into your engine and align it with your transmission. Anyone who claims their engine still rattles after installing these parts, likely messed this part of the install up (i.e. didn’t seat the bracket correctly onto this mount) or has another problem entirely. My car is super quiet with all 4 new mounts installed. Also, I snapped one of my old posts off my old rusted mount and was unable to get the nut off. If your old mounts are really bad, you may want to order some high grade (10.9 or 8.8) M12 – 1.25mm flange nuts, which will fit the threads on most of these parts. M12 is easy to find but not with a 1.25mm/fine thread. I went to three hardware stores and couldn’t find one with the flange head like is used. Great set of replacement mounts at a phenomenal price! Install is a bit tricky but that’s not the product, rather my shade tree status!

Parts work great

Love it haven't had any problems thank you

I had only used the front mount which somewhat worked ok, however when the time came to replace the driver side mount, it did not fit at all. The slugs did not coincide with the holes on the car chassis. Low QC from manufacturer.

Works great

Hasta hoy todo bien esperemos que dure muchas gracias

Excelente

Tengo corolla 2005 y funcionaron perfectos.